Forked from
oai / openairinterface5G
21171 commits behind the upstream repository.
-
frtabu authored
Use common log mechanism in layer 3, mapping specific macros to common ones and extending common log utilities to support specific layer3 requirements
frtabu authoredUse common log mechanism in layer 3, mapping specific macros to common ones and extending common log utilities to support specific layer3 requirements
CMakeLists.txt 90.00 KiB
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
# Author: laurent THOMAS, Lionel GAUTHIER
cmake_minimum_required (VERSION 2.8)
#############################################
# Base directories, compatible with legacy OAI building
################################################
set (OPENAIR_DIR $ENV{OPENAIR_DIR})
set (NFAPI_DIR ${OPENAIR_DIR}/nfapi/open-nFAPI)
set (NFAPI_USER_DIR ${OPENAIR_DIR}/nfapi/oai_integration)
set (OPENAIR1_DIR ${OPENAIR_DIR}/openair1)
set (OPENAIR2_DIR ${OPENAIR_DIR}/openair2)
set (OPENAIR3_DIR ${OPENAIR_DIR}/openair3)
set (OPENAIR_TARGETS ${OPENAIR_DIR}/targets)
set (OPENAIR3_DIR ${OPENAIR_DIR}/openair3)
set (OPENAIR_CMAKE ${OPENAIR_DIR}/cmake_targets)
set (OPENAIR_BIN_DIR ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY})
project (OpenAirInterface)
###########################################
# macros to define options as there is numerous options in oai
################################################
macro(add_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
add_definitions("-D${name}=${value}")
endmacro(add_option)
macro(add_boolean_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY TYPE BOOL)
if (${value})
add_definitions("-D${name}")
endif (${value})
endmacro(add_boolean_option)
macro(add_integer_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}}) else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
add_definitions("-D${name}=${value}")
endmacro(add_integer_option)
macro(add_list1_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY STRINGS ${ARGN})
if(NOT "${value}" STREQUAL "False")
add_definitions("-D${name}=${value}")
endif()
endmacro(add_list1_option)
macro(add_list2_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY STRINGS ${ARGN})
if(NOT "${value}" STREQUAL "False")
add_definitions("-D${value}=1")
endif()
endmacro(add_list2_option)
macro(add_list_string_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
set_property(CACHE ${name} PROPERTY STRINGS ${ARGN})
if(NOT "${value}" STREQUAL "False")
add_definitions("-D${name}=\"${value}\"")
endif()
endmacro(add_list_string_option)
function(make_version VERSION_VALUE)
math(EXPR RESULT "0")
foreach (ARG ${ARGN})
math(EXPR RESULT "${RESULT} * 16 + ${ARG}")
endforeach()
set(${VERSION_VALUE} "${RESULT}" PARENT_SCOPE)
endfunction()
####################################################
# compilation flags
#############################################
#set(CMAKE_BUILD_TYPE "Debug")
if (CMAKE_BUILD_TYPE STREQUAL "")
set(CMAKE_BUILD_TYPE "RelWithDebInfo")
endif()
message("CMAKE_BUILD_TYPE is ${CMAKE_BUILD_TYPE}")
add_list_string_option(CMAKE_BUILD_TYPE "RelWithDebInfo" "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel." Debug Release RelWithDebInfo MinSizeRel)
Message("Architecture is ${CMAKE_SYSTEM_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
set(C_FLAGS_PROCESSOR "-gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
else (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
if(EXISTS "/proc/cpuinfo")
file(STRINGS "/proc/cpuinfo" CPUINFO REGEX flags LIMIT_COUNT 1) if (CPUINFO MATCHES "avx2")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mavx2")
set(COMPILATION_AVX2 "True")
else()
set(COMPILATION_AVX2 "False")
endif()
if (CPUINFO MATCHES "sse4_1")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.1")
endif()
if (CPUINFO MATCHES "ssse3")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mssse3")
endif()
else()
Message("/proc/cpuinfo does not exit. We will use manual CPU flags")
endif()
endif()
set(C_FLAGS_PROCESSOR " ${C_FLAGS_PROCESSOR} ${CFLAGS_PROCESSOR_USER}")
Message("C_FLAGS_PROCESSOR is ${C_FLAGS_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR MATCHES "x86")
if ( (NOT( C_FLAGS_PROCESSOR MATCHES "ssse3")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.1")) )
Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1 -mavx2\" ")
endif()
endif()
#
set(CMAKE_C_FLAGS
"${CMAKE_C_FLAGS} ${C_FLAGS_PROCESSOR} -std=gnu99 -Wall -Wstrict-prototypes -fno-strict-aliasing -rdynamic -funroll-loops -Wno-packed-bitfield-compat -fPIC ")
# add autotools definitions that were maybe used!
set(CMAKE_C_FLAGS
"${CMAKE_C_FLAGS} -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_ARPA_INET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRERROR=1 -DHAVE_SOCKET=1 -DHAVE_MEMSET=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_LIBSCTP -DASN_DISABLE_OER_SUPPORT -D'MAKE_VERSION(a,b,c)=((a)*256+(b)*16+c)'"
)
set(CMAKE_CXX_FLAGS
"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -std=c++11 "
)
#########################
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${CMAKE_CURRENT_BINARY_DIR}")
#########################
# set a flag for changes in the source code
# these changes are related to hardcoded path to include .h files
add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
set(GIT_BRANCH "UNKNOWN")
set(GIT_COMMIT_HASH "UNKNOWN")
set(GIT_COMMIT_DATE "UNKNOWN")
find_package(Git)
if(GIT_FOUND)
message("git found: ${GIT_EXECUTABLE}")
# Get the current working branch
execute_process(
COMMAND git rev-parse --abbrev-ref HEAD
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_BRANCH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Get the latest abbreviated commit hash of the working branch
execute_process(
COMMAND git log -1 --format=%h
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_HASH
OUTPUT_STRIP_TRAILING_WHITESPACE )
# Get the latest commit date of the working branch
execute_process(
COMMAND git log -1 --format=%cd
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_DATE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endif()
# Below is a hard-coded info
set (FIRMWARE_VERSION "No svn information")
add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_VERSION=\"Branch: ${GIT_BRANCH} Abrev. Hash: ${GIT_COMMIT_HASH} Date: ${GIT_COMMIT_DATE}\"")
add_definitions("-DPACKAGE_BUGREPORT=\"openair4g-devel@lists.eurecom.fr\"")
# Debug related options
#########################################
add_boolean_option(ASN_DEBUG False "ASN1 coder/decoder Debug")
add_boolean_option(EMIT_ASN_DEBUG False "ASN1 coder/decoder Debug")
add_boolean_option(MSG_PRINT False "print debug messages")
add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
add_boolean_option(XER_PRINT False "print XER Format")
add_boolean_option(RRC_MSG_PRINT False "print RRC messages")
add_boolean_option(PDCP_MSG_PRINT False "print PDCP messages to /tmp/pdcp.log")
add_boolean_option(DEBUG_PDCP_PAYLOAD False "print PDCP PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(DEBUG_MAC_INTERFACE False "print MAC-RLC PDU exchange to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(TRACE_RLC_PAYLOAD False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(TEST_OMG False "???")
add_boolean_option(DEBUG_OMG False "???")
add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope")
add_boolean_option(PRINT_STATS False "This adds the possibility to see the status")
add_boolean_option(T_TRACER True "Activate the T tracer, a debugging/monitoring framework" )
add_boolean_option(UE_AUTOTEST_TRACE False "Activate UE autotest specific logs")
add_boolean_option(UE_DEBUG_TRACE False "Activate UE debug trace")
add_boolean_option(UE_TIMING_TRACE False "Activate UE timing trace")
add_boolean_option(DISABLE_LOG_X False "Deactivate all LOG_* macros")
add_boolean_option(USRP_REC_PLAY False "Enable USRP record playback mode")
add_boolean_option(UE_NAS_USE_TUN False "Enable UE NAS TUN device instead of ue_ip.ko")
add_boolean_option(BASIC_SIMULATOR False "Has to be True when building the basic simulator, False otherwise")
add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering")
add_boolean_option(ENABLE_ITTI True "ITTI is internal messaging, should remain enabled for most targets")
set (ITTI_DIR ${OPENAIR_DIR}/common/utils/itti)
if (${ENABLE_ITTI})
add_library(ITTI
# add .h files if depend on (this one is generated)
${ITTI_DIR}/intertask_interface.h
${ITTI_DIR}/intertask_interface.c
${ITTI_DIR}/backtrace.c
${ITTI_DIR}/memory_pools.c
${ITTI_DIR}/signals.c
${ITTI_DIR}/timer.c
)
set(ITTI_LIB ITTI)
set(GTPU_need_ITTI ${OPENAIR3_DIR}/GTPV1-U/gtpv1u_eNB.c)
endif (${ENABLE_ITTI})
#############################
# ASN.1 grammar C code generation & dependancies
################################
# A difficulty: asn1c generates C code of a un-predictable list of files
# so, generate the c from asn1c once at cmake run time
# So, if someone modify the asn.1 source file in such as way that it will create
# (so creating new asn.1 objects instead of modifying the object attributes)# New C code source file, cmake must be re-run (instead of re-running make only)
#############
# set(asn1c_call "${OPENAIR_CMAKE}/tools/generate_asn1")
# set(fix_asn1c_call "${OPENAIR_CMAKE}/tools/fix_asn1")
set(asn1_generated_dir ${OPENAIR_BIN_DIR})
set(protoc_call "${OPENAIR_CMAKE}/tools/generate_protobuf")
set(protobuf_generated_dir ${OPENAIR_BIN_DIR})
# RRC
######
add_list2_option(RRC_ASN1_VERSION "Rel14" "ASN.1 version of RRC interface" "Rel8" "Rel10" "Rel14" "CBA")
if (${RRC_ASN1_VERSION} STREQUAL "Rel8")
make_version(RRC_VERSION 8 6 0)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-86.asn)
elseif (${RRC_ASN1_VERSION} STREQUAL "CBA")
make_version(RRC_VERSION 10 2 0)
add_definitions(-DCBA)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20-lola.asn)
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel10")
make_version(RRC_VERSION 10 2 0)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20.asn)
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel11")
make_version(RRC_VERSION 11 18 0)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-11.18.0.asn1)
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel12")
make_version(RRC_VERSION 12 16 0)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-12.16.0.asn1)
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel13")
make_version(RRC_VERSION 13 9 1)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-13.9.1.asn1)
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel14")
make_version(RRC_VERSION 14 7 0)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-14.7.0.asn1)
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel15")
make_version(RRC_VERSION 15 2 2)
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-15.2.2.asn1)
endif (${RRC_ASN1_VERSION} STREQUAL "Rel8")
add_definitions(-DRRC_VERSION=${RRC_VERSION})
set (RRC_FULL_DIR ${asn1_generated_dir}/RRC_${RRC_ASN1_VERSION})
message("calling asn1c -pdu=all -fcompound-names -gen-PER -no-gen-OER -no-gen-example -D ${RRC_FULL_DIR} ${RRC_GRAMMAR}")
execute_process(COMMAND mkdir -p ${RRC_FULL_DIR}
COMMAND env asn1c -pdu=all -fcompound-names -gen-PER -no-gen-OER -no-gen-example -D ${RRC_FULL_DIR} ${RRC_GRAMMAR}
RESULT_VARIABLE ret)
if (NOT ${ret} STREQUAL 0)
message(FATAL_ERROR "${ret}: error")
endif (NOT ${ret} STREQUAL 0)
file(GLOB rrc_source ${RRC_FULL_DIR}/*.c)
file(GLOB rrc_h ${RRC_FULL_DIR}/*.h)
set(rrc_h ${rrc_h} ${RRC_FULL_DIR}/asn_constant.h)
set_source_files_properties(${rrc_source} PROPERTIES COMPILE_FLAGS -w) # suppress warnings from generated code
add_library(RRC_LIB ${rrc_h} ${rrc_source}
${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1_msg.c
${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1_msg_NB_IoT.c)
include_directories ("${RRC_FULL_DIR}")
# add the command to generate the source code
# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
add_custom_command (
OUTPUT ${RRC_FULL_DIR}/asn_constant.h
COMMAND mkdir -p ${RRC_FULL_DIR}
COMMAND env asn1c -pdu=all -fcompound-names -gen-PER -no-gen-OER -no-gen-example -D ${RRC_FULL_DIR} ${RRC_GRAMMAR}
DEPENDS ${RRC_GRAMMAR}
)
# S1AP
# Same limitation as described in RRC: unknown generated file list
# so we generate it at cmake time##############
add_list1_option(S1AP_RELEASE R14 "S1AP ASN.1 grammar version" R8 R9 R10 R14 R15)
set(S1AP_DIR ${OPENAIR3_DIR}/S1AP)
if (${S1AP_RELEASE} STREQUAL "R8")
make_version(S1AP_VERSION 8 10 0)
set(S1AP_ASN_FILES "s1ap-8.10.0.asn1")
elseif (${S1AP_RELEASE} STREQUAL "R9")
make_version(S1AP_VERSION 9 10 0)
set(S1AP_ASN_FILES "s1ap-9.10.0.asn1")
elseif (${S1AP_RELEASE} STREQUAL "R10")
make_version(S1AP_VERSION 10 9 0)
set(S1AP_ASN_FILES "s1ap-10.9.0.asn1")
elseif (${S1AP_RELEASE} STREQUAL "R11")
make_version(S1AP_VERSION 11 8 0)
set(S1AP_ASN_FILES "s1ap-11.8.0.asn1")
elseif (${S1AP_RELEASE} STREQUAL "R12")
make_version(S1AP_VERSION 12 7 0)
set(S1AP_ASN_FILES "s1ap-12.7.0.asn1")
elseif (${S1AP_RELEASE} STREQUAL "R13")
make_version(S1AP_VERSION 13 6 0)
set(S1AP_ASN_FILES "s1ap-13.6.0.asn1")
elseif (${S1AP_RELEASE} STREQUAL "R14")
make_version(S1AP_VERSION 14 5 0)
set(S1AP_ASN_FILES "s1ap-14.5.0.asn1")
else (${S1AP_RELEASE} STREQUAL "R15")
make_version(S1AP_VERSION 15 1 0)
set(S1AP_ASN_FILES "s1ap-15.1.0.asn1")
endif(${S1AP_RELEASE} STREQUAL "R8")
add_definitions(-DS1AP_VERSION=${S1AP_VERSION})
set(S1AP_ASN_DIR ${S1AP_DIR}/MESSAGES/ASN1/${S1AP_RELEASE})
set(S1AP_C_DIR ${asn1_generated_dir}/S1AP_${S1AP_RELEASE})
message("calling ASN1C_PREFIX=S1AP_ asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${S1AP_C_DIR} ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}")
execute_process(COMMAND mkdir -p ${S1AP_C_DIR}
COMMAND env "ASN1C_PREFIX=S1AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${S1AP_C_DIR} ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}
RESULT_VARIABLE ret)
if (NOT ${ret} STREQUAL 0)
message(FATAL_ERROR "${ret}: error")
endif (NOT ${ret} STREQUAL 0)
file(GLOB S1AP_source ${S1AP_C_DIR}/*.c)
file(GLOB s1ap_h ${S1AP_C_DIR}/*.h)
set(s1ap_h ${s1ap_h})
add_custom_command (
OUTPUT ${S1AP_C_DIR}/S1AP_asn_constant.h
COMMAND mkdir -p ${S1AP_C_DIR}
COMMAND env "ASN1C_PREFIX=S1AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${S1AP_C_DIR} ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}
DEPENDS ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}
)
add_library(S1AP_LIB
${S1AP_source}
${S1AP_DIR}/s1ap_common.c
)
include_directories ("${S1AP_C_DIR}")
include_directories ("${S1AP_DIR}")
add_library(S1AP_ENB
${S1AP_DIR}/s1ap_eNB.c
${S1AP_DIR}/s1ap_eNB_context_management_procedures.c
${S1AP_DIR}/s1ap_eNB_decoder.c
${S1AP_DIR}/s1ap_eNB_encoder.c
${S1AP_DIR}/s1ap_eNB_handlers.c
${S1AP_DIR}/s1ap_eNB_itti_messaging.c
${S1AP_DIR}/s1ap_eNB_management_procedures.c
${S1AP_DIR}/s1ap_eNB_nas_procedures.c
${S1AP_DIR}/s1ap_eNB_nnsf.c
${S1AP_DIR}/s1ap_eNB_overload.c
${S1AP_DIR}/s1ap_eNB_trace.c ${S1AP_DIR}/s1ap_eNB_ue_context.c
)
#X2AP
# Same limitation as described in RRC/S1AP: unknown generated file list
# so we generate it at cmake time
##############
add_list1_option(X2AP_RELEASE R14 "X2AP ASN.1 grammar version" R8 R11 R12 R14 R15)
set(X2AP_DIR ${OPENAIR2_DIR}/X2AP)
if (${X2AP_RELEASE} STREQUAL "R8")
make_version(X2AP_VERSION 8 9 0)
set(X2AP_ASN_FILES x2ap-8.9.0.asn1)
elseif (${X2AP_RELEASE} STREQUAL "R11")
make_version(X2AP_VERSION 11 9 0)
set(X2AP_ASN_FILES x2ap-11.9.0.asn1)
elseif (${X2AP_RELEASE} STREQUAL "R12")
make_version(X2AP_VERSION 12 9 0)
set(X2AP_ASN_FILES x2ap-12.9.0.asn1)
elseif (${X2AP_RELEASE} STREQUAL "R14")
make_version(X2AP_VERSION 14 6 0)
set(X2AP_ASN_FILES x2ap-14.6.0.asn1)
elseif (${X2AP_RELEASE} STREQUAL "R15")
make_version(X2AP_VERSION 15 1 0)
set(X2AP_ASN_FILES x2ap-15.1.0.asn1)
endif(${X2AP_RELEASE} STREQUAL "R8")
add_definitions(-DX2AP_VERSION=${X2AP_VERSION})
set(X2AP_ASN_DIR ${X2AP_DIR}/MESSAGES/ASN1/${X2AP_RELEASE})
set(X2AP_C_DIR ${asn1_generated_dir}/X2AP_${X2AP_RELEASE})
message("calling ASN1C_PREFIX=X2AP_ asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${X2AP_C_DIR} ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}")
execute_process(COMMAND mkdir -p ${X2AP_C_DIR}
COMMAND env "ASN1C_PREFIX=X2AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${X2AP_C_DIR} ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}
RESULT_VARIABLE ret)
if (NOT ${ret} STREQUAL 0)
message(FATAL_ERROR "${ret}: error")
endif (NOT ${ret} STREQUAL 0)
file(GLOB X2AP_source ${X2AP_C_DIR}/*.c)
file(GLOB x2ap_h ${X2AP_C_DIR}/*.h)
set(x2ap_h ${x2ap_h})
add_custom_command (
OUTPUT ${X2AP_C_DIR}/X2AP_asn_constant.h
COMMAND mkdir -p ${X2AP_C_DIR}
COMMAND env "ASN1C_PREFIX=X2AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${X2AP_C_DIR} ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}
DEPENDS ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}
)
add_library(X2AP_LIB
${X2AP_source}
${X2AP_DIR}/x2ap_common.c
)
include_directories ("${X2AP_C_DIR}")
include_directories ("${X2AP_DIR}")
# Hardware dependant options
###################################
add_list1_option(NB_ANTENNAS_RX "2" "Number of antennas in reception" "1" "2" "4")
add_list1_option(NB_ANTENNAS_TX "4" "Number of antennas in transmission" "1" "2" "4")
add_list2_option(RF_BOARD "EXMIMO" "RF head type" "None" "EXMIMO" "OAI_USRP" "OAI_BLADERF" "CPRIGW" "OAI_LMSSDR")
add_list2_option(TRANSP_PRO "None" "Transport protocol type" "None" "ETHERNET")
#NOKIA config enhancement
set (CONFIG_ROOTDIR
${OPENAIR_DIR}/common/config
)
set (CONFIG_SOURCES
${CONFIG_ROOTDIR}/config_load_configmodule.c ${CONFIG_ROOTDIR}/config_userapi.c
${CONFIG_ROOTDIR}/config_cmdline.c
)
set (CONFIG_LIBCONFIG_SOURCES
${CONFIG_ROOTDIR}/libconfig/config_libconfig.c
)
add_library(params_libconfig MODULE ${CONFIG_LIBCONFIG_SOURCES} )
target_link_libraries(params_libconfig config)
# shared library loader
set (SHLIB_LOADER_SOURCES
${OPENAIR_DIR}/common/utils/load_module_shlib.c
)
# include RF devices / transport protocols library modules
######################################################################
include_directories("${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/")
include_directories ("${OPENAIR_TARGETS}/ARCH/EXMIMO/DEFS/")
#set (option_HWEXMIMOLIB_lib "-l ")
set(HWLIB_EXMIMO_SOURCE
${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
# ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/gain_control.c
)
add_library(oai_exmimodevif MODULE ${HWLIB_EXMIMO_SOURCE} )
include_directories("${OPENAIR_TARGETS}/ARCH/USRP/USERSPACE/LIB/")
set(HWLIB_USRP_SOURCE
${OPENAIR_TARGETS}/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
)
add_library(oai_usrpdevif MODULE ${HWLIB_USRP_SOURCE} )
target_link_libraries(oai_usrpdevif uhd)
include_directories("${OPENAIR_TARGETS}/ARCH/BLADERF/USERSPACE/LIB/")
set(HWLIB_BLADERF_SOURCE
${OPENAIR_TARGETS}/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
)
add_library(oai_bladerfdevif MODULE ${HWLIB_BLADERF_SOURCE} )
target_link_libraries(oai_bladerfdevif bladeRF)
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/")
set(HWLIB_LMSSDR_SOURCE
${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp
)
add_library(oai_lmssdrdevif MODULE ${HWLIB_LMSSDR_SOURCE} )
target_include_directories(oai_lmssdrdevif PRIVATE /usr/local/include/lime)
target_link_libraries(oai_lmssdrdevif LimeSuite )
include_directories("${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/")
set(TPLIB_ETHERNET_SOURCE
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/eth_udp.c
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/eth_raw.c
)
add_library(oai_eth_transpro MODULE ${TPLIB_ETHERNET_SOURCE} )
include_directories("${OPENAIR_TARGETS}/ARCH/mobipass/")
set(TPLIB_MOBIPASS_SOURCE
${OPENAIR_TARGETS}/ARCH/mobipass/interface.c
${OPENAIR_TARGETS}/ARCH/mobipass/mobipass.c
${OPENAIR_TARGETS}/ARCH/mobipass/queues.c
)
add_library(oai_mobipass MODULE ${TPLIB_MOBIPASS_SOURCE} )
# Hide all functions/variables in the mobipass library.
# Use __attribute__((__visibility__("default")))
# in the source code to unhide a function/variable.
get_target_property(mobipas_cflags oai_mobipass COMPILE_FLAGS)
set_target_properties(oai_mobipass PROPERTIES COMPILE_FLAGS "${mobipass_cflags} -fvisibility=hidden")
# TCP bridge libraries######################################################################
# this one is for internal use at Eurecom and is not documented
set(HWLIB_TCP_BRIDGE_SOURCE
${OPENAIR_TARGETS}/ARCH/tcp_bridge/tcp_bridge.c
)
add_library(tcp_bridge MODULE ${HWLIB_TCP_BRIDGE_SOURCE} )
#get_target_property(tcp_bridge_cflags tcp_bridge COMPILE_FLAGS)
#set_target_properties(tcp_bridge PROPERTIES COMPILE_FLAGS "${tcp_bridge_cflags} -fvisibility=hidden")
set_target_properties(tcp_bridge PROPERTIES COMPILE_FLAGS "-fvisibility=hidden")
# this one is to connect OAI eNB and OAI UE in the basic simulator
# see targets/ARCH/tcp_bridge/README.tcp_bridge_oai for usage
set(HWLIB_TCP_BRIDGE_OAI_SOURCE
${OPENAIR_TARGETS}/ARCH/tcp_bridge/tcp_bridge_oai.c
)
add_library(tcp_bridge_oai MODULE ${HWLIB_TCP_BRIDGE_OAI_SOURCE} )
set_target_properties(tcp_bridge_oai PROPERTIES COMPILE_FLAGS "-fvisibility=hidden")
##########################################################
include_directories ("${OPENAIR_TARGETS}/ARCH/COMMON")
Message("DEADLINE_SCHEDULER flag is ${DEADLINE_SCHEDULER}")
Message("CPU_Affinity flag is ${CPU_AFFINITY}")
##############################################################
# ???!!! TO BE DOCUMENTED OPTIONS !!!???
##############################################################
add_boolean_option(ENABLE_SECURITY True "Enable LTE integrity and ciphering between RRC UE and eNB")
add_boolean_option(ENABLE_USE_MME True "eNB connected to MME (INTERFACE S1-C), not standalone eNB")
add_boolean_option(NO_RRM True "DO WE HAVE A RADIO RESSOURCE MANAGER: NO")
add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "set the RLC mode to AM for the default bearer")
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????")
add_boolean_option(DEADLINE_SCHEDULER True "Use the Linux scheduler SCHED_DEADLINE: kernel >= 3.14")
add_boolean_option(CPU_AFFINITY False "Enable CPU Affinity of threads (only valid without deadline scheduler). It is enabled only with >2 CPUs")
add_boolean_option(NAS_NETLINK False "useless ??? Must be True to compile nasmesh driver without rtai ????")
add_boolean_option(OAI_NW_DRIVER_USE_NETLINK True "????")
add_boolean_option(USE_MME False "this flag is used only one time in lte-softmodem.c")
add_list_string_option(PACKAGE_NAME "NotDefined" "As per attribute name")
add_boolean_option(MESSAGE_CHART_GENERATOR False "For generating sequence diagrams")
add_boolean_option(MESSAGE_CHART_GENERATOR_RLC_MAC False "trace RLC-MAC exchanges in sequence diagrams")
add_boolean_option(MESSAGE_CHART_GENERATOR_PHY False "trace some PHY exchanges in sequence diagrams")
add_boolean_option(UE_EXPANSION False "enable UE_EXPANSION with max 256 UE")
add_boolean_option(PHY_TX_THREAD False "enable UE_EXPANSION with max 256 UE")
add_boolean_option(PRE_SCD_THREAD False "enable UE_EXPANSION with max 256 UE")
########################
# Include order
##########################
add_boolean_option(ENB_MODE True "Swap the include directories between openair2 and openair3" )
##########################
# SCHEDULING/REAL-TIME/PERF options
##########################
add_boolean_option(ENABLE_USE_CPU_EXECUTION_TIME True "Add data in vcd traces: disable it if perf issues")
add_boolean_option(ENABLE_VCD True "always true now, time measurements of proc calls and var displays")
add_boolean_option(ENABLE_VCD_FIFO True "time measurements of proc calls and var displays sent to FIFO (one more thread)")
add_boolean_option(LINUX False "used in weird memcpy() in pdcp.c ???")
add_boolean_option(LINUX_LIST False "used only in lists.c: either use OAI implementation of lists or Linux one (should be True, but it is False")
add_boolean_option(LOG_NO_THREAD True "Disable thread for log, seems always set to true")
add_boolean_option(OPENAIR_LTE True "Seems legacy: keep it to true")
##########################
# PHY options
##########################add_boolean_option(DRIVER2013 True "only relevant for EXMIMO")
add_boolean_option(EXMIMO_IOT True "????")
add_boolean_option(LOCALIZATION False "???")
add_integer_option(MAX_NUM_CCs 1 "????")
add_boolean_option(MU_RECEIVER False "????")
add_boolean_option(PHYSIM True "for L1 simulators (dlsim, ulsim, ...)")
add_boolean_option(PHY_CONTEXT True "not clear: must remain False for dlsim")
add_boolean_option(PHY_EMUL False "not clear: must remain False for dlsim")
add_boolean_option(SMBV False "Rohde&Schwarz SMBV100A vector signal generator")
add_boolean_option(DEBUG_PHY False "Enable PHY layer debugging options")
add_boolean_option(DEBUG_PHY_PROC False "Enable debugging of PHY layer procedures")
add_boolean_option(DEBUG_DLSCH False "Enable debugging of DLSCH physical layer channel")
add_boolean_option(MEX False "Enabling compilation with mex")
##########################
# NAS LAYER OPTIONS
##########################
add_boolean_option(ENABLE_NAS_UE_LOGGING True "????")
add_boolean_option(NAS_BUILT_IN_UE True "UE NAS layer present in this executable")
add_boolean_option(NAS_UE True "NAS UE INSTANCE (<> NAS_MME)")
##########################
# ACCESS STRATUM LAYER2 OPTIONS
##########################
add_boolean_option(JUMBO_FRAME True "ENABLE LARGE SDU in ACCESS STRATUM (larger than common MTU)")
##########################
# RLC LAYER OPTIONS
##########################
add_boolean_option(OPENAIR2 True "Access Stratum layer 2 built in executable")
add_boolean_option(TRACE_RLC_PAYLOAD False "Fatal assert in this case")
add_boolean_option(RLC_STOP_ON_LOST_PDU False "Fatal assert in this case")
add_boolean_option(TRACE_RLC_MUTEX True "TRACE for RLC, possible problem in thread scheduling")
add_boolean_option(TRACE_RLC_AM_BO False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_FREE_SDU False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_HOLE False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_PDU False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RESEGMENT False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RX False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RX_DECODE False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_TX False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_TX_STATUS False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_STATUS_CREATION False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(STOP_ON_IP_TRAFFIC_OVERLOAD False "")
add_boolean_option(TRACE_RLC_UM_DAR False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_DISPLAY_ASCII_DATA False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_PDU False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_RX False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_SEGMENT False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_TX_STATUS False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
##########################
# PDCP LAYER OPTIONS
##########################
add_boolean_option(PDCP_USE_NETLINK False "For eNB, PDCP communicate with a NETLINK socket if connected to network driver, else could use a RT-FIFO")
add_boolean_option(PDCP_USE_NETLINK_QUEUES False "When PDCP_USE_NETLINK is true, incoming IP packets are stored in queues")
add_boolean_option(LINK_ENB_PDCP_TO_IP_DRIVER False "For eNB, PDCP communicate with a IP driver")
add_boolean_option(LINK_ENB_PDCP_TO_GTPV1U True "For eNB, PDCP communicate with GTP-U protocol (eNB<->S-GW)")
##########################
# RRC LAYER OPTIONS
##########################
add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "Otherwise it is UM, configure params are actually set in rrc_eNB.c:rrc_eNB_generate_defaultRRCConnectionReconfiguration(...)")
########################### S1AP LAYER OPTIONS
##########################
# none
# add the binary tree to the search path for include files
#######################################################
# We will find ConfigOAI.h after generation in target directory
include_directories("${OPENAIR_BIN_DIR}")
# add directories to find all include files
# the internal rule is to use generic names such as defs.h
# but to make it uniq name as adding the relative path in the include directtive
# example: #include "RRC/LTE/rrc_defs.h"
#find_path (include_dirs_all *.h ${OPENAIR_DIR})
#find_path (include_dirs_all *.h PATHS /usr/include NO_CMAKE_PATH)
#include_directories("${include_dirs_all}")
# Legacy exact order
if(ENB_MODE)
include_directories("${OPENAIR2_DIR}/COMMON")
include_directories("${OPENAIR2_DIR}/UTIL")
include_directories("${OPENAIR2_DIR}/UTIL/LOG")
include_directories("${OPENAIR3_DIR}/COMMON")
include_directories("${OPENAIR3_DIR}/UTILS")
else()
include_directories("${OPENAIR3_DIR}/COMMON")
include_directories("${OPENAIR3_DIR}/UTILS")
include_directories("${OPENAIR2_DIR}/COMMON")
include_directories("${OPENAIR2_DIR}/UTIL")
include_directories("${OPENAIR2_DIR}/UTIL/LOG")
endif()
include_directories("${NFAPI_DIR}/nfapi/public_inc")
include_directories("${NFAPI_DIR}/common/public_inc")
include_directories("${NFAPI_DIR}/pnf/public_inc")
include_directories("${NFAPI_DIR}/nfapi/inc")
include_directories("${NFAPI_DIR}/sim_common/inc")
include_directories("${NFAPI_DIR}/pnf_sim/inc")
include_directories("${OPENAIR1_DIR}")
include_directories("${OPENAIR2_DIR}")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/AM_v9.3.0")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/UM_v9.3.0")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/TM_v9.3.0")
include_directories("${OPENAIR2_DIR}/LAYER2/PDCP_v10.1.0")
include_directories("${OPENAIR2_DIR}/RRC/LTE/MESSAGES")
include_directories("${OPENAIR2_DIR}/RRC/LTE")
include_directories("${OPENAIR_DIR}/common/utils")
include_directories("${OPENAIR_DIR}/common/utils/itti")
include_directories("${OPENAIR3_DIR}/NAS/COMMON")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/API/NETWORK")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/EMM/MSG")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/ESM/MSG")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/IES")
include_directories("${OPENAIR3_DIR}/NAS/COMMON/UTIL")
include_directories("${OPENAIR3_DIR}/SECU")
include_directories("${OPENAIR3_DIR}/SCTP")
include_directories("${OPENAIR3_DIR}/S1AP")
include_directories("${OPENAIR2_DIR}/X2AP")
include_directories("${OPENAIR3_DIR}/UDP")
include_directories("${OPENAIR3_DIR}/GTPV1-U")
include_directories("${OPENAIR_DIR}/targets/COMMON")
include_directories("${OPENAIR_DIR}/targets/ARCH/COMMON")
include_directories("${OPENAIR_DIR}/targets/ARCH/EXMIMO/USERSPACE/LIB/")
include_directories("${OPENAIR_DIR}/targets/ARCH/EXMIMO/DEFS")
include_directories("${OPENAIR2_DIR}/ENB_APP")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/RRC")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PDCP")
include_directories("${OPENAIR2_DIR}/UTIL/OSA")
include_directories("${OPENAIR2_DIR}/UTIL/LFDS/liblfds6.1.1/liblfds611/inc")
include_directories("${OPENAIR2_DIR}/UTIL/LFDS/liblfds7.0.0/liblfds700/inc")include_directories("${OPENAIR2_DIR}/UTIL/MEM")
include_directories("${OPENAIR2_DIR}/UTIL/LISTS")
include_directories("${OPENAIR2_DIR}/UTIL/FIFO")
include_directories("${OPENAIR2_DIR}/UTIL/OCG")
include_directories("${OPENAIR2_DIR}/UTIL/MATH")
include_directories("${OPENAIR2_DIR}/UTIL/TIMER")
include_directories("${OPENAIR2_DIR}/UTIL/OMG")
include_directories("${OPENAIR2_DIR}/UTIL/OTG")
include_directories("${OPENAIR2_DIR}/UTIL/CLI")
include_directories("${OPENAIR2_DIR}/UTIL/OPT")
include_directories("${OPENAIR2_DIR}/UTIL/OMV")
include_directories("${OPENAIR2_DIR}/RRC/LTE/MESSAGES")
include_directories("${OPENAIR3_DIR}/GTPV1-U/nw-gtpv1u/shared")
include_directories("${OPENAIR3_DIR}/GTPV1-U/nw-gtpv1u/include")
include_directories("${OPENAIR_DIR}")
# Utilities Library
################
# set the version of protobuf messages, V3 not supported yet
add_list1_option(FLPT_VERSION V2 "FLPT MSG protobuf grammar version" V2 V3)
if (${FLPT_VERSION} STREQUAL "V2")
set (FLPTDIR V2)
elseif (${FLPT_VERSION} STREQUAL "V3")
set (FLPTDIR V3)
endif(${FLPT_VERSION} STREQUAL "V2")
set(FLPT_MSG_DIR ${OPENAIR2_DIR}/ENB_APP/MESSAGES/${FLPTDIR} )
set(FLPT_MSG_FILES
${FLPT_MSG_DIR}/header.proto
${FLPT_MSG_DIR}/flexran.proto
${FLPT_MSG_DIR}/stats_common.proto
${FLPT_MSG_DIR}/stats_messages.proto
${FLPT_MSG_DIR}/time_common.proto
${FLPT_MSG_DIR}/controller_commands.proto
${FLPT_MSG_DIR}/mac_primitives.proto
${FLPT_MSG_DIR}/config_messages.proto
${FLPT_MSG_DIR}/config_common.proto
${FLPT_MSG_DIR}/control_delegation.proto
)
set(FLPT_C_DIR ${protobuf_generated_dir}/${FLPTDIR})
#message("calling protoc_call=${protoc_call} FLPT_C_DIR=${FLPT_C_DIR} FLPT_MSG_FILES=${FLPT_MSG_FILES}")
execute_process(COMMAND ${protoc_call} ${FLPT_C_DIR} ${FLPT_MSG_DIR} ${FLPT_MSG_FILES})
file(GLOB FLPT_source ${FLPT_C_DIR}/*.c)
set(FLPT_OAI_generated
${FLPT_C_DIR}/header.pb-c.c
${FLPT_C_DIR}/flexran.pb-c.c
${FLPT_C_DIR}/stats_common.pb-c.c
${FLPT_C_DIR}/stats_messages.pb-c.c
${FLPT_C_DIR}/time_common.pb-c.c
${FLPT_C_DIR}/controller_commands.pb-c.c
${FLPT_C_DIR}/mac_primitives.pb-c.c
${FLPT_C_DIR}/config_messages.pb-c.c
${FLPT_C_DIR}/config_common.pb-c.c
${FLPT_C_DIR}/control_delegation.pb-c.c
)
file(GLOB flpt_h ${FLPT_C_DIR}/*.h)
set(flpt_h ${flpt_h} )
add_library(FLPT_MSG
${FLPT_OAI_generated}
${FLPT_source}
)
set(FLPT_MSG_LIB FLPT_MSG)
#message("prpt c dir is : ${FLPT_C_DIR}")
include_directories (${FLPT_C_DIR})
add_library(ASYNC_IF ${OPENAIR2_DIR}/UTIL/ASYNC_IF/socket_link.c
${OPENAIR2_DIR}/UTIL/ASYNC_IF/link_manager.c
${OPENAIR2_DIR}/UTIL/ASYNC_IF/message_queue.c
${OPENAIR2_DIR}/UTIL/ASYNC_IF/ringbuffer_queue.c
)
set(ASYNC_IF_LIB ASYNC_IF)
include_directories(${OPENAIR2_DIR}/UTIL/ASYNC_IF)
add_library(FLEXRAN_AGENT
${OPENAIR2_DIR}/ENB_APP/flexran_agent_handler.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_common.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_ran_api.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_timer.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_common_internal.c
${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC/flexran_agent_mac.c
${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/RRC/flexran_agent_rrc.c
${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PDCP/flexran_agent_pdcp.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_task_manager.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_net_comm.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_async.c
${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC/flexran_agent_mac_internal.c
)
set(FLEXRAN_AGENT_LIB FLEXRAN_AGENT)
#include_directories(${OPENAIR2_DIR}/ENB_APP)
set(PROTOBUF_LIB "protobuf-c")
FIND_PATH(LIBYAML_INCLUDE_DIR NAMES yaml.h)
FIND_LIBRARY(LIBYAML_LIBRARIES NAMES yaml libyaml)
INCLUDE(FindPackageHandleStandardArgs)
FIND_PACKAGE_HANDLE_STANDARD_ARGS(Yaml DEFAULT_MSG LIBYAML_LIBRARIES LIBYAML_INCLUDE_DIR)
MARK_AS_ADVANCED(LIBYAML_INCLUDE_DIR LIBYAML_LIBRARIES)
#set(PROTOBUF_LIB "protobuf") #for Cpp
add_library(HASHTABLE
${OPENAIR_DIR}/common/utils/hashtable/hashtable.c
${OPENAIR_DIR}/common/utils/hashtable/obj_hashtable.c
)
include_directories(${OPENAIR_DIR}/common/utils/hashtable)
if (MESSAGE_CHART_GENERATOR)
add_library(MSC
${OPENAIR_DIR}/common/utils/msc/msc.c
)
set(MSC_LIB MSC)
endif()
include_directories(${OPENAIR_DIR}/common/utils/msc)
set(UTIL_SRC
# ${OPENAIR2_DIR}/UTIL/CLI/cli.c
# ${OPENAIR2_DIR}/UTIL/CLI/cli_cmd.c
# ${OPENAIR2_DIR}/UTIL/CLI/cli_server.c
${OPENAIR2_DIR}/UTIL/FIFO/pad_list.c
${OPENAIR2_DIR}/UTIL/LISTS/list.c
${OPENAIR2_DIR}/UTIL/LISTS/list2.c
${OPENAIR_DIR}/common/utils/LOG/log.c
# ${OPENAIR2_DIR}/UTIL/LOG/vcd_signal_dumper.c
${OPENAIR2_DIR}/UTIL/MATH/oml.c
${OPENAIR2_DIR}/UTIL/MEM/mem_block.c
# ${OPENAIR2_DIR}/UTIL/OCG/OCG.c
# ${OPENAIR2_DIR}/UTIL/OCG/OCG_create_dir.c
# ${OPENAIR2_DIR}/UTIL/OCG/OCG_detect_file.c
# ${OPENAIR2_DIR}/UTIL/OCG/OCG_generate_report.c
# ${OPENAIR2_DIR}/UTIL/OCG/OCG_parse_filename.c
# ${OPENAIR2_DIR}/UTIL/OCG/OCG_parse_XML.c
# ${OPENAIR2_DIR}/UTIL/OCG/OCG_save_XML.c# ${OPENAIR2_DIR}/UTIL/OMG/common.c
# ${OPENAIR2_DIR}/UTIL/OMG/grid.c
# ${OPENAIR2_DIR}/UTIL/OMG/job.c
# ${OPENAIR2_DIR}/UTIL/OMG/mobility_parser.c
# ${OPENAIR2_DIR}/UTIL/OMG/omg.c
#${OPENAIR2_DIR}/UTIL/OMG/omg_hashtable.c
# ${OPENAIR2_DIR}/UTIL/OMG/rwalk.c
# ${OPENAIR2_DIR}/UTIL/OMG/rwp.c
# ${OPENAIR2_DIR}/UTIL/OMG/static.c
# ${OPENAIR2_DIR}/UTIL/OMG/steadystaterwp.c
# ${OPENAIR2_DIR}/UTIL/OMG/trace.c
# ${OPENAIR2_DIR}/UTIL/OMG/trace_hashtable.c
${OPENAIR2_DIR}/UTIL/OPT/probe.c
# ${OPENAIR2_DIR}/UTIL/OTG/otg_tx.c
# ${OPENAIR2_DIR}/UTIL/OTG/otg.c
# ${OPENAIR2_DIR}/UTIL/OTG/otg_kpi.c
# ${OPENAIR2_DIR}/UTIL/OTG/otg_models.c
# ${OPENAIR2_DIR}/UTIL/OTG/otg_form.c
# ${OPENAIR2_DIR}/UTIL/OTG/otg_rx.c
)
add_library(UTIL ${UTIL_SRC})
#set(OMG_SUMO_SRC
# ${OPENAIR2_DIR}/UTIL/OMG/client_traci_OMG.c
# ${OPENAIR2_DIR}/UTIL/OMG/id_manager.c
# ${OPENAIR2_DIR}/UTIL/OMG/sumo.c
# ${OPENAIR2_DIR}/UTIL/OMG/socket_traci_OMG.c
# ${OPENAIR2_DIR}/UTIL/OMG/storage_traci_OMG.c
# )
#add_library(OMG_SUMO ${OMG_SUMO_SRC})
set(SECU_OSA_SRC
${OPENAIR2_DIR}/UTIL/OSA/osa_key_deriver.c
${OPENAIR2_DIR}/UTIL/OSA/osa_rijndael.c
${OPENAIR2_DIR}/UTIL/OSA/osa_snow3g.c
${OPENAIR2_DIR}/UTIL/OSA/osa_stream_eea.c
${OPENAIR2_DIR}/UTIL/OSA/osa_stream_eia.c
)
add_library(SECU_OSA ${SECU_OSA_SRC})
set(SECU_CN_SRC
${OPENAIR3_DIR}/SECU/kdf.c
${OPENAIR3_DIR}/SECU/rijndael.c
${OPENAIR3_DIR}/SECU/snow3g.c
${OPENAIR3_DIR}/SECU/key_nas_deriver.c
${OPENAIR3_DIR}/SECU/nas_stream_eea1.c
${OPENAIR3_DIR}/SECU/nas_stream_eia1.c
${OPENAIR3_DIR}/SECU/nas_stream_eea2.c
${OPENAIR3_DIR}/SECU/nas_stream_eia2.c
)
add_library(SECU_CN ${SECU_CN_SRC})
# Physical Channel Procedures Scheduling
################################"
set(SCHED_SRC
${OPENAIR1_DIR}/SCHED/fapi_l1.c
${OPENAIR1_DIR}/SCHED/phy_procedures_lte_eNb.c
${OPENAIR1_DIR}/SCHED/phy_procedures_lte_common.c
)
add_library(SCHED_LIB ${SCHED_SRC})
set(SCHED_SRC_RU
${OPENAIR1_DIR}/SCHED/ru_procedures.c
${OPENAIR1_DIR}/SCHED/prach_procedures.c
)
add_library(SCHED_RU_LIB ${SCHED_SRC_RU})
set(SCHED_SRC_UE
${OPENAIR1_DIR}/SCHED_UE/phy_procedures_lte_ue.c
${OPENAIR1_DIR}/SCHED/phy_procedures_lte_common.c ${OPENAIR1_DIR}/SCHED_UE/pucch_pc.c
${OPENAIR1_DIR}/SCHED_UE/pusch_pc.c
${OPENAIR1_DIR}/SCHED_UE/srs_pc.c
)
add_library(SCHED_UE_LIB ${SCHED_SRC_UE})
# nFAPI
#################################
set(NFAPI_COMMON_SRC
${NFAPI_DIR}/common/src/debug.c
)
add_library(NFAPI_COMMON_LIB ${NFAPI_COMMON_SRC})
include_directories(${NFAPI_DIR}/common/public_inc)
set(NFAPI_SRC
${NFAPI_DIR}/nfapi/src/nfapi.c
${NFAPI_DIR}/nfapi/src/nfapi_p4.c
${NFAPI_DIR}/nfapi/src/nfapi_p5.c
${NFAPI_DIR}/nfapi/src/nfapi_p7.c
)
add_library(NFAPI_LIB ${NFAPI_SRC})
include_directories(${NFAPI_DIR}/nfapi/public_inc)
include_directories(${NFAPI_DIR}/nfapi/inc)
set(NFAPI_PNF_SRC
${NFAPI_DIR}/pnf/src/pnf.c
${NFAPI_DIR}/pnf/src/pnf_interface.c
${NFAPI_DIR}/pnf/src/pnf_p7.c
${NFAPI_DIR}/pnf/src/pnf_p7_interface.c
)
add_library(NFAPI_PNF_LIB ${NFAPI_PNF_SRC})
include_directories(${NFAPI_DIR}/pnf/public_inc)
include_directories(${NFAPI_DIR}/pnf/inc)
set(NFAPI_VNF_SRC
${NFAPI_DIR}/vnf/src/vnf.c
${NFAPI_DIR}/vnf/src/vnf_interface.c
${NFAPI_DIR}/vnf/src/vnf_p7.c
${NFAPI_DIR}/vnf/src/vnf_p7_interface.c
)
add_library(NFAPI_VNF_LIB ${NFAPI_VNF_SRC})
include_directories(${NFAPI_DIR}/vnf/public_inc)
include_directories(${NFAPI_DIR}/vnf/inc)
# nFAPI user defined code
#############################
set(NFAPI_USER_SRC
${NFAPI_USER_DIR}/nfapi.c
${NFAPI_USER_DIR}/nfapi_pnf.c
${NFAPI_USER_DIR}/nfapi_vnf.c
)
add_library(NFAPI_USER_LIB ${NFAPI_USER_SRC})
include_directories(${NFAPI_USER_DIR})
# Layer 1
#############################
set(PHY_TURBOSRC
${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_avx2_16bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder.c
)
set(PHY_TURBOIF
${OPENAIR1_DIR}/PHY/CODING/coding_load.c)
add_library(coding MODULE ${PHY_TURBOSRC} )
set(PHY_SRC_COMMON
# depend on code generation from asn1c
${RRC_FULL_DIR}/asn_constant.h
# actual source
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
# ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slss.c
# ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sldch.c
# ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slsch.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/group_hopping.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/phich_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/power_control.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch_common.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_scrambling.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_gold_generic.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/srs_modulation.c
${OPENAIR1_DIR}/PHY/MODULATION/ofdm_mod.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_time.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_cell_spec.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_uespec.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_gold.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_gold_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_ul_ref.c
${OPENAIR1_DIR}/PHY/CODING/lte_segmentation.c
${OPENAIR1_DIR}/PHY/CODING/ccoding_byte.c
${OPENAIR1_DIR}/PHY/CODING/ccoding_byte_lte.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
${OPENAIR1_DIR}/PHY/CODING/crc_byte.c
${PHY_TURBOIF}
${OPENAIR1_DIR}/PHY/CODING/lte_rate_matching.c
${OPENAIR1_DIR}/PHY/CODING/viterbi.c
${OPENAIR1_DIR}/PHY/CODING/viterbi_lte.c
${OPENAIR1_DIR}/PHY/INIT/init_top.c
${OPENAIR1_DIR}/PHY/INIT/lte_parms.c
${OPENAIR1_DIR}/PHY/INIT/lte_param_init.c
${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/lte_dfts.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
${OPENAIR1_DIR}/PHY/TOOLS/time_meas.c
${OPENAIR1_DIR}/PHY/TOOLS/lut.c
)
set(PHY_SRC
# actual source
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pss.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots_mbsfn.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_coding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_modulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pbch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/edci.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/phich.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich.c ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_decoding.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/rar_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/uci_tools.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_eNB_measurements.c
${OPENAIR1_DIR}/PHY/INIT/lte_init.c
)
set(PHY_SRC_RU
# actual source
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if4_tools.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if5_tools.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_ul.c
${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz.c
${OPENAIR1_DIR}/PHY/MODULATION/beamforming.c
${OPENAIR1_DIR}/PHY/MODULATION/compute_bf_weights.c
${OPENAIR1_DIR}/PHY/INIT/lte_init_ru.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach.c
)
set(PHY_SRC_UE
# actual source
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/sss_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_decoding.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dci_tools_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/uci_tools_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pbch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dci_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/phich_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pcfich_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pucch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/prach_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pmch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pch_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slss.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/sldch.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slsch.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/drs_modulation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/ulsch_modulation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/ulsch_coding.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/rar_tools_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/initial_sync.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep.c
${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_mbsfn.c
${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz_ue.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_time.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_timefreq.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_ue.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_bf_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_est_freq_offset.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/adjust_gain.c
${OPENAIR1_DIR}/PHY/INIT/lte_init_ue.c
)
if (${SMBV})
set(PHY_SRC "${PHY_SRC} ${OPENAIR1_DIR}/PHY/TOOLS/smbv.c")
endif (${SMBV})
if (${COMPILATION_AVX2} STREQUAL "True")
set(PHY_SRC_UE ${PHY_SRC_UE} ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c)
endif ()
add_library(PHY_COMMON ${PHY_SRC_COMMON})
add_library(PHY ${PHY_SRC})
add_library(PHY_UE ${PHY_SRC_UE})
add_library(PHY_RU ${PHY_SRC_RU})
#Library for mex functions
#########################3
set(PHY_MEX_UE
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
${OPENAIR_DIR}/common/utils/LOG/log.c
${OPENAIR_DIR}/common/utils/T/T.c
${OPENAIR_DIR}/common/utils/T/local_tracer.c
${OPENAIR_DIR}/common/config/config_cmdline.c
${OPENAIR_DIR}/common/config/config_userapi.c
${OPENAIR_DIR}/common/config/config_load_configmodule.c
)
add_library(PHY_MEX ${PHY_MEX_UE})
#Layer 2 library
#####################
set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
set(PHY_INTERFACE_DIR ${OPENAIR2_DIR}/PHY_INTERFACE)
set(RLC_DIR ${OPENAIR2_DIR}/LAYER2/RLC)
set(RLC_UM_DIR ${OPENAIR2_DIR}/LAYER2/RLC/UM_v9.3.0)
set(RLC_AM_DIR ${OPENAIR2_DIR}/LAYER2/RLC/AM_v9.3.0)
set(RLC_TM_DIR ${OPENAIR2_DIR}/LAYER2/RLC/TM_v9.3.0)
set(RRC_DIR ${OPENAIR2_DIR}/RRC/LTE)
set(PDCP_DIR ${OPENAIR2_DIR}/LAYER2/PDCP_v10.1.0)
set(L2_SRC
${OPENAIR2_DIR}/LAYER2/openair2_proc.c
${PDCP_DIR}/pdcp.c
${PDCP_DIR}/pdcp_fifo.c
${PDCP_DIR}/pdcp_sequence_manager.c
${PDCP_DIR}/pdcp_primitives.c
${PDCP_DIR}/pdcp_util.c
${PDCP_DIR}/pdcp_security.c
${PDCP_DIR}/pdcp_netlink.c
${RLC_AM_DIR}/rlc_am.c
${RLC_AM_DIR}/rlc_am_init.c
${RLC_AM_DIR}/rlc_am_timer_poll_retransmit.c
${RLC_AM_DIR}/rlc_am_timer_reordering.c
${RLC_AM_DIR}/rlc_am_timer_status_prohibit.c
${RLC_AM_DIR}/rlc_am_segment.c
${RLC_AM_DIR}/rlc_am_segments_holes.c
${RLC_AM_DIR}/rlc_am_in_sdu.c
${RLC_AM_DIR}/rlc_am_receiver.c
${RLC_AM_DIR}/rlc_am_retransmit.c
${RLC_AM_DIR}/rlc_am_windows.c
${RLC_AM_DIR}/rlc_am_rx_list.c
${RLC_AM_DIR}/rlc_am_reassembly.c
${RLC_AM_DIR}/rlc_am_status_report.c
${RLC_TM_DIR}/rlc_tm.c
${RLC_TM_DIR}/rlc_tm_init.c ${RLC_UM_DIR}/rlc_um.c
${RLC_UM_DIR}/rlc_um_fsm.c
${RLC_UM_DIR}/rlc_um_control_primitives.c
${RLC_UM_DIR}/rlc_um_segment.c
${RLC_UM_DIR}/rlc_um_reassembly.c
${RLC_UM_DIR}/rlc_um_receiver.c
${RLC_UM_DIR}/rlc_um_dar.c
${RLC_DIR}/rlc_mac.c
${RLC_DIR}/rlc.c
${RLC_DIR}/rlc_rrc.c
${RLC_DIR}/rlc_mpls.c
${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_eNB.c
${RRC_DIR}/rrc_eNB_S1AP.c
${RRC_DIR}/rrc_eNB_UE_context.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface.c
${RRC_DIR}/L2_interface_common.c
${RRC_DIR}/L2_interface_ue.c
)
set(L2_SRC_UE
${PDCP_DIR}/pdcp.c
${PDCP_DIR}/pdcp_fifo.c
${PDCP_DIR}/pdcp_sequence_manager.c
${PDCP_DIR}/pdcp_primitives.c
${PDCP_DIR}/pdcp_util.c
${PDCP_DIR}/pdcp_security.c
${PDCP_DIR}/pdcp_netlink.c
${RLC_AM_DIR}/rlc_am.c
${RLC_AM_DIR}/rlc_am_init.c
${RLC_AM_DIR}/rlc_am_timer_poll_retransmit.c
${RLC_AM_DIR}/rlc_am_timer_reordering.c
${RLC_AM_DIR}/rlc_am_timer_status_prohibit.c
${RLC_AM_DIR}/rlc_am_segment.c
${RLC_AM_DIR}/rlc_am_segments_holes.c
${RLC_AM_DIR}/rlc_am_in_sdu.c
${RLC_AM_DIR}/rlc_am_receiver.c
${RLC_AM_DIR}/rlc_am_retransmit.c
${RLC_AM_DIR}/rlc_am_windows.c
${RLC_AM_DIR}/rlc_am_rx_list.c
${RLC_AM_DIR}/rlc_am_reassembly.c
${RLC_AM_DIR}/rlc_am_status_report.c
${RLC_TM_DIR}/rlc_tm.c
${RLC_TM_DIR}/rlc_tm_init.c
${RLC_UM_DIR}/rlc_um.c
${RLC_UM_DIR}/rlc_um_fsm.c
${RLC_UM_DIR}/rlc_um_control_primitives.c
${RLC_UM_DIR}/rlc_um_segment.c
${RLC_UM_DIR}/rlc_um_reassembly.c
${RLC_UM_DIR}/rlc_um_receiver.c
${RLC_UM_DIR}/rlc_um_dar.c
${RLC_DIR}/rlc_mac.c
${RLC_DIR}/rlc.c
${RLC_DIR}/rlc_rrc.c
${RLC_DIR}/rlc_mpls.c
${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface_common.c
${RRC_DIR}/L2_interface_ue.c
)
set (MAC_SRC
#${PHY_INTERFACE_DIR}/phy_stub_UE.c
${PHY_INTERFACE_DIR}/IF_Module.c
${MAC_DIR}/main.c
#${MAC_DIR}/main_ue.c
#${MAC_DIR}/ue_procedures.c
#${MAC_DIR}/ra_procedures.c
${MAC_DIR}/l1_helpers.c ${MAC_DIR}/rar_tools.c
#${MAC_DIR}/rar_tools_ue.c
${MAC_DIR}/eNB_scheduler.c
${MAC_DIR}/eNB_scheduler_dlsch.c
${MAC_DIR}/eNB_scheduler_ulsch.c
${MAC_DIR}/eNB_scheduler_mch.c
${MAC_DIR}/eNB_scheduler_bch.c
${MAC_DIR}/eNB_scheduler_primitives.c
${MAC_DIR}/eNB_scheduler_RA.c
${MAC_DIR}/eNB_scheduler_fairRR.c
${MAC_DIR}/eNB_scheduler_phytest.c
${MAC_DIR}/pre_processor.c
${MAC_DIR}/config.c
#${MAC_DIR}/config_ue.c
)
set (MAC_SRC_UE
${PHY_INTERFACE_DIR}/phy_stub_UE.c
${MAC_DIR}/main_ue.c
${MAC_DIR}/ue_procedures.c
${MAC_DIR}/ra_procedures.c
${MAC_DIR}/l1_helpers.c
${MAC_DIR}/rar_tools_ue.c
${MAC_DIR}/config_ue.c
)
set (ENB_APP_SRC
${OPENAIR2_DIR}/ENB_APP/enb_app.c
${OPENAIR2_DIR}/ENB_APP/enb_config.c
${OPENAIR2_DIR}/ENB_APP/RRC_config_tools.c
)
add_library(L2
${L2_SRC}
${MAC_SRC}
${ENB_APP_SRC})
# ${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
add_library(L2_UE
${L2_SRC_UE}
${MAC_SRC_UE}
)
include_directories(${NFAPI_USER_DIR})
# L3 Libs
##########################
# CN libs
##########################
add_library(CN_UTILS
${OPENAIR3_DIR}/UTILS/conversions.c
${OPENAIR3_DIR}/UTILS/enum_string.c
${OPENAIR3_DIR}/UTILS/mcc_mnc_itu.c
)
set(GTPV1U_DIR ${OPENAIR3_DIR}/GTPV1-U)
set (GTPV1U_SRC
${RRC_DIR}/rrc_eNB_GTPV1U.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1uTunnelEndPoint.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1uTrxn.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1uMsg.c
${GTPV1U_DIR}/nw-gtpv1u/src/NwGtpv1u.c
${GTPV1U_DIR}/gtpv1u_teid_pool.c
)
add_library(GTPV1U ${GTPV1U_SRC})
set(SCTP_SRC
${OPENAIR3_DIR}/SCTP/sctp_common.c ${OPENAIR3_DIR}/SCTP/sctp_eNB_task.c
${OPENAIR3_DIR}/SCTP/sctp_eNB_itti_messaging.c
)
add_library(SCTP_CLIENT ${SCTP_SRC})
add_library(UDP ${OPENAIR3_DIR}/UDP/udp_eNB_task.c)
set(NAS_SRC ${OPENAIR3_DIR}/NAS/)
set(libnas_api_OBJS
${NAS_SRC}COMMON/API/NETWORK/as_message.c
${NAS_SRC}COMMON/API/NETWORK/nas_message.c
${NAS_SRC}COMMON/API/NETWORK/network_api.c
)
set(libnas_emm_msg_OBJS
${NAS_SRC}COMMON/EMM/MSG/AttachAccept.c
${NAS_SRC}COMMON/EMM/MSG/AttachComplete.c
${NAS_SRC}COMMON/EMM/MSG/AttachReject.c
${NAS_SRC}COMMON/EMM/MSG/AttachRequest.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationFailure.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationReject.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationRequest.c
${NAS_SRC}COMMON/EMM/MSG/AuthenticationResponse.c
${NAS_SRC}COMMON/EMM/MSG/CsServiceNotification.c
${NAS_SRC}COMMON/EMM/MSG/DetachAccept.c
${NAS_SRC}COMMON/EMM/MSG/DetachRequest.c
${NAS_SRC}COMMON/EMM/MSG/DownlinkNasTransport.c
${NAS_SRC}COMMON/EMM/MSG/EmmInformation.c
${NAS_SRC}COMMON/EMM/MSG/emm_msg.c
${NAS_SRC}COMMON/EMM/MSG/EmmStatus.c
${NAS_SRC}COMMON/EMM/MSG/ExtendedServiceRequest.c
${NAS_SRC}COMMON/EMM/MSG/GutiReallocationCommand.c
${NAS_SRC}COMMON/EMM/MSG/GutiReallocationComplete.c
${NAS_SRC}COMMON/EMM/MSG/IdentityRequest.c
${NAS_SRC}COMMON/EMM/MSG/IdentityResponse.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeCommand.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeComplete.c
${NAS_SRC}COMMON/EMM/MSG/SecurityModeReject.c
${NAS_SRC}COMMON/EMM/MSG/ServiceReject.c
${NAS_SRC}COMMON/EMM/MSG/ServiceRequest.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateAccept.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateComplete.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateReject.c
${NAS_SRC}COMMON/EMM/MSG/TrackingAreaUpdateRequest.c
${NAS_SRC}COMMON/EMM/MSG/UplinkNasTransport.c
)
set(libnas_esm_msg_OBJS
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ActivateDefaultEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceAllocationReject.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceAllocationRequest.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceModificationReject.c
${NAS_SRC}COMMON/ESM/MSG/BearerResourceModificationRequest.c
${NAS_SRC}COMMON/ESM/MSG/DeactivateEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/DeactivateEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/EsmInformationRequest.c
${NAS_SRC}COMMON/ESM/MSG/EsmInformationResponse.c
${NAS_SRC}COMMON/ESM/MSG/esm_msg.c
${NAS_SRC}COMMON/ESM/MSG/EsmStatus.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextAccept.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextReject.c
${NAS_SRC}COMMON/ESM/MSG/ModifyEpsBearerContextRequest.c
${NAS_SRC}COMMON/ESM/MSG/PdnConnectivityReject.c
${NAS_SRC}COMMON/ESM/MSG/PdnConnectivityRequest.c ${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectReject.c
${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectRequest.c
)
set(libnas_ies_OBJS
${NAS_SRC}COMMON/IES/AccessPointName.c
${NAS_SRC}COMMON/IES/AdditionalUpdateResult.c
${NAS_SRC}COMMON/IES/AdditionalUpdateType.c
${NAS_SRC}COMMON/IES/ApnAggregateMaximumBitRate.c
${NAS_SRC}COMMON/IES/AuthenticationFailureParameter.c
${NAS_SRC}COMMON/IES/AuthenticationParameterAutn.c
${NAS_SRC}COMMON/IES/AuthenticationParameterRand.c
${NAS_SRC}COMMON/IES/AuthenticationResponseParameter.c
${NAS_SRC}COMMON/IES/CipheringKeySequenceNumber.c
${NAS_SRC}COMMON/IES/Cli.c
${NAS_SRC}COMMON/IES/CsfbResponse.c
${NAS_SRC}COMMON/IES/DaylightSavingTime.c
${NAS_SRC}COMMON/IES/DetachType.c
${NAS_SRC}COMMON/IES/DrxParameter.c
${NAS_SRC}COMMON/IES/EmergencyNumberList.c
${NAS_SRC}COMMON/IES/EmmCause.c
${NAS_SRC}COMMON/IES/EpsAttachResult.c
${NAS_SRC}COMMON/IES/EpsAttachType.c
${NAS_SRC}COMMON/IES/EpsBearerContextStatus.c
${NAS_SRC}COMMON/IES/EpsBearerIdentity.c
${NAS_SRC}COMMON/IES/EpsMobileIdentity.c
${NAS_SRC}COMMON/IES/EpsNetworkFeatureSupport.c
${NAS_SRC}COMMON/IES/EpsQualityOfService.c
${NAS_SRC}COMMON/IES/EpsUpdateResult.c
${NAS_SRC}COMMON/IES/EpsUpdateType.c
${NAS_SRC}COMMON/IES/EsmCause.c
${NAS_SRC}COMMON/IES/EsmInformationTransferFlag.c
${NAS_SRC}COMMON/IES/EsmMessageContainer.c
${NAS_SRC}COMMON/IES/GprsTimer.c
${NAS_SRC}COMMON/IES/GutiType.c
${NAS_SRC}COMMON/IES/IdentityType2.c
${NAS_SRC}COMMON/IES/ImeisvRequest.c
${NAS_SRC}COMMON/IES/KsiAndSequenceNumber.c
${NAS_SRC}COMMON/IES/LcsClientIdentity.c
${NAS_SRC}COMMON/IES/LcsIndicator.c
${NAS_SRC}COMMON/IES/LinkedEpsBearerIdentity.c
${NAS_SRC}COMMON/IES/LlcServiceAccessPointIdentifier.c
${NAS_SRC}COMMON/IES/LocationAreaIdentification.c
${NAS_SRC}COMMON/IES/MessageType.c
${NAS_SRC}COMMON/IES/MobileIdentity.c
${NAS_SRC}COMMON/IES/MobileStationClassmark2.c
${NAS_SRC}COMMON/IES/MobileStationClassmark3.c
${NAS_SRC}COMMON/IES/MsNetworkCapability.c
${NAS_SRC}COMMON/IES/MsNetworkFeatureSupport.c
${NAS_SRC}COMMON/IES/NasKeySetIdentifier.c
${NAS_SRC}COMMON/IES/NasMessageContainer.c
${NAS_SRC}COMMON/IES/NasRequestType.c
${NAS_SRC}COMMON/IES/NasSecurityAlgorithms.c
${NAS_SRC}COMMON/IES/NetworkName.c
${NAS_SRC}COMMON/IES/Nonce.c
${NAS_SRC}COMMON/IES/PacketFlowIdentifier.c
${NAS_SRC}COMMON/IES/PagingIdentity.c
${NAS_SRC}COMMON/IES/PdnAddress.c
${NAS_SRC}COMMON/IES/PdnType.c
${NAS_SRC}COMMON/IES/PlmnList.c
${NAS_SRC}COMMON/IES/ProcedureTransactionIdentity.c
${NAS_SRC}COMMON/IES/ProtocolConfigurationOptions.c
${NAS_SRC}COMMON/IES/ProtocolDiscriminator.c
${NAS_SRC}COMMON/IES/PTmsiSignature.c
${NAS_SRC}COMMON/IES/QualityOfService.c
${NAS_SRC}COMMON/IES/RadioPriority.c
${NAS_SRC}COMMON/IES/SecurityHeaderType.c
${NAS_SRC}COMMON/IES/ServiceType.c
${NAS_SRC}COMMON/IES/ShortMac.c
${NAS_SRC}COMMON/IES/SsCode.c ${NAS_SRC}COMMON/IES/SupportedCodecList.c
${NAS_SRC}COMMON/IES/TimeZoneAndTime.c
${NAS_SRC}COMMON/IES/TimeZone.c
${NAS_SRC}COMMON/IES/TmsiStatus.c
${NAS_SRC}COMMON/IES/TrackingAreaIdentity.c
${NAS_SRC}COMMON/IES/TrackingAreaIdentityList.c
${NAS_SRC}COMMON/IES/TrafficFlowAggregateDescription.c
${NAS_SRC}COMMON/IES/TrafficFlowTemplate.c
${NAS_SRC}COMMON/IES/TransactionIdentifier.c
${NAS_SRC}COMMON/IES/UeNetworkCapability.c
${NAS_SRC}COMMON/IES/UeRadioCapabilityInformationUpdateNeeded.c
${NAS_SRC}COMMON/IES/UeSecurityCapability.c
${NAS_SRC}COMMON/IES/VoiceDomainPreferenceAndUeUsageSetting.c
)
set (libnas_utils_OBJS
${NAS_SRC}COMMON/UTIL/device.c
${NAS_SRC}COMMON/UTIL/memory.c
${NAS_SRC}COMMON/UTIL/nas_timer.c
${NAS_SRC}COMMON/UTIL/socket.c
${NAS_SRC}COMMON/UTIL/stty.c
${NAS_SRC}COMMON/UTIL/TLVEncoder.c
${NAS_SRC}COMMON/UTIL/TLVDecoder.c
${NAS_SRC}COMMON/UTIL/OctetString.c
)
if(NAS_UE)
set(libnas_ue_api_OBJS
${NAS_SRC}UE/API/USER/at_command.c
${NAS_SRC}UE/API/USER/at_error.c
${NAS_SRC}UE/API/USER/at_response.c
${NAS_SRC}UE/API/USER/user_api.c
${NAS_SRC}UE/API/USER/user_indication.c
${NAS_SRC}UE/API/USIM/aka_functions.c
${NAS_SRC}UE/API/USIM/usim_api.c
)
set(libnas_ue_emm_OBJS
${NAS_SRC}UE/EMM/Attach.c
${NAS_SRC}UE/EMM/Authentication.c
${NAS_SRC}UE/EMM/Detach.c
${NAS_SRC}UE/EMM/emm_main.c
${NAS_SRC}UE/EMM/EmmStatusHdl.c
${NAS_SRC}UE/EMM/Identification.c
${NAS_SRC}UE/EMM/IdleMode.c
${NAS_SRC}UE/EMM/LowerLayer.c
${NAS_SRC}UE/EMM/SecurityModeControl.c
${NAS_SRC}UE/EMM/ServiceRequestHdl.c
${NAS_SRC}UE/EMM/TrackingAreaUpdate.c
)
set(libnas_ue_emm_sap_OBJS
${NAS_SRC}UE/EMM/SAP/emm_as.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredAttachNeeded.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredAttemptingToAttach.c
${NAS_SRC}UE/EMM/SAP/EmmDeregistered.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredLimitedService.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNoCellAvailable.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNoImsi.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredNormalService.c
${NAS_SRC}UE/EMM/SAP/EmmDeregisteredPlmnSearch.c
${NAS_SRC}UE/EMM/SAP/emm_esm.c
${NAS_SRC}UE/EMM/SAP/emm_fsm.c
${NAS_SRC}UE/EMM/SAP/EmmNull.c
${NAS_SRC}UE/EMM/SAP/emm_recv.c
${NAS_SRC}UE/EMM/SAP/emm_reg.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredAttemptingToUpdate.c
${NAS_SRC}UE/EMM/SAP/EmmRegistered.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredImsiDetachInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredLimitedService.c ${NAS_SRC}UE/EMM/SAP/EmmRegisteredNoCellAvailable.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredNormalService.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredPlmnSearch.c
${NAS_SRC}UE/EMM/SAP/EmmRegisteredUpdateNeeded.c
${NAS_SRC}UE/EMM/SAP/emm_sap.c
${NAS_SRC}UE/EMM/SAP/emm_send.c
${NAS_SRC}UE/EMM/SAP/EmmServiceRequestInitiated.c
${NAS_SRC}UE/EMM/SAP/EmmTrackingAreaUpdatingInitiated.c
)
set (libnas_ue_esm_OBJS
${NAS_SRC}UE/ESM/DedicatedEpsBearerContextActivation.c
${NAS_SRC}UE/ESM/DefaultEpsBearerContextActivation.c
${NAS_SRC}UE/ESM/EpsBearerContextDeactivation.c
${NAS_SRC}UE/ESM/esm_ebr.c
${NAS_SRC}UE/ESM/esm_ebr_context.c
${NAS_SRC}UE/ESM/esm_ip.c
${NAS_SRC}UE/ESM/esm_main.c
${NAS_SRC}UE/ESM/esm_pt.c
${NAS_SRC}UE/ESM/EsmStatusHdl.c
${NAS_SRC}UE/ESM/PdnConnectivity.c
${NAS_SRC}UE/ESM/PdnDisconnect.c
)
set(libnas_ue_esm_sap_OBJS
${NAS_SRC}UE/ESM/SAP/esm_recv.c
${NAS_SRC}UE/ESM/SAP/esm_send.c
${NAS_SRC}UE/ESM/SAP/esm_sap.c
)
add_library(LIB_NAS_UE
${NAS_SRC}UE/nas_itti_messaging.c
${NAS_SRC}UE/nas_network.c
${NAS_SRC}UE/nas_parser.c
${NAS_SRC}UE/nas_proc.c
${NAS_SRC}UE/nas_user.c
${libnas_api_OBJS}
${libnas_ue_api_OBJS}
${libnas_emm_msg_OBJS}
${libnas_esm_msg_OBJS}
${libnas_ies_OBJS}
${libnas_utils_OBJS}
${libnas_ue_emm_OBJS}
${libnas_ue_emm_sap_OBJS}
${libnas_ue_esm_OBJS}
${libnas_ue_esm_sap_OBJS}
)
set(NAS_UE_LIB LIB_NAS_UE)
include_directories(${NAS_SRC}UE)
include_directories(${NAS_SRC}UE/API/USER)
include_directories(${NAS_SRC}UE/API/USIM)
include_directories(${NAS_SRC}UE/EMM)
include_directories(${NAS_SRC}UE/EMM/SAP)
include_directories(${NAS_SRC}UE/ESM)
include_directories(${NAS_SRC}UE/ESM/SAP)
endif()
# nbiot
add_definitions("-DNUMBER_OF_UE_MAX_NB_IoT=16")
set (NBIOT_SOURCES
${OPENAIR2_DIR}/ENB_APP/NB_IoT_config.c
)
add_library(NB_IoT MODULE ${NBIOT_SOURCES} )
# shared library loader
set (SHLIB_LOADER_SOURCES
${OPENAIR_DIR}/common/utils/load_module_shlib.c
)
# Make lfds as a own source code (even if it is a outside library)
# For better intergration with compilation flags & structure of cmake###################################################################
set(lfds ${OPENAIR2_DIR}/UTIL/LFDS/liblfds6.1.1/liblfds611/src/)
file(GLOB lfds_queue ${lfds}/lfds611_queue/*.c)
file(GLOB lfds_ring ${lfds}/lfds611_ringbuffer/*.c)
file(GLOB lfds_slist ${lfds}/lfds611_slist/*.c)
file(GLOB lfds_stack ${lfds}/lfds611_stack/*.c)
file(GLOB lfds_freelist ${lfds}/lfds611_freelist/*.c)
include_directories(${lfds})
add_library(LFDS
${lfds_queue} ${lfds_ring} ${lfds_slist} ${lfds_stack} ${lfds_freelist}
${lfds}/lfds611_liblfds/lfds611_liblfds_abstraction_test_helpers.c
${lfds}/lfds611_liblfds/lfds611_liblfds_aligned_free.c
${lfds}/lfds611_liblfds/lfds611_liblfds_aligned_malloc.c
${lfds}/lfds611_abstraction/lfds611_abstraction_free.c
${lfds}/lfds611_abstraction/lfds611_abstraction_malloc.c
)
set(lfds7 ${OPENAIR2_DIR}/UTIL/LFDS/liblfds7.0.0/liblfds700/src/)
file(GLOB lfds7_queue ${lfds7}/lfds700_queue/*.c)
file(GLOB lfds7_ring ${lfds7}/lfds700_ringbuffer/*.c)
file(GLOB lfds7_qbss ${lfds7}/lfds700_queue_bounded_singleconsumer_singleproducer/*.c)
file(GLOB lfds7_stack ${lfds7}/lfds700_stack/*.c)
file(GLOB lfds7_freelist ${lfds7}/lfds700_freelist/*.c)
file(GLOB lfds7_btree ${lfds7}/lfds700_btree_addonly_unbalanced/*.c)
file(GLOB lfds7_hash ${lfds7}/lfds700_hash_addonly/*.c)
file(GLOB lfds7_ordered_list ${lfds7}/lfds700_list_addonly_ordered_singlylinked/*.c)
file(GLOB lfds7_unordered_list ${lfds7}/lfds700_list_addonly_singlylinked_unordered/*.c)
file(GLOB lfds7_misc ${lfds7}/lfds700_misc/*.c)
include_directories(${lfds7})
add_library(LFDS7
${lfds7_queue} ${lfds7_ring} ${lfds7_qbss} ${lfds7_stack} ${lfds7_freelist} ${lfds7_btree} ${lfds7_hash} ${lfds7_ordered_list} ${lfds7_unordered_list} ${lfds7_misc}
)
# Simulation library
##########################
add_library(SIMU
${OPENAIR1_DIR}/SIMULATION/TOOLS/random_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/rangen_double.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/multipath_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/multipath_tv_channel.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/abstraction.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/channel_sim.c
${OPENAIR1_DIR}/SIMULATION/RF/rf.c
${OPENAIR1_DIR}/SIMULATION/RF/dac.c
${OPENAIR1_DIR}/SIMULATION/RF/adc.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
)
add_library(SIMU_ETH
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c
#${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/emu_transport.c
)
add_library(OPENAIR0_LIB
${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
)
include_directories("${NFAPI_DIR}/nfapi/public_inc")
include_directories("${NFAPI_DIR}/common/public_inc")
include_directories("${NFAPI_DIR}/pnf/public_inc")
include_directories("${NFAPI_DIR}/nfapi/inc")
include_directories("${NFAPI_DIR}/sim_common/inc")
include_directories("${NFAPI_DIR}/pnf_sim/inc")
# System packages that are required
# We use either the cmake buildin, in ubuntu are in: /usr/share/cmake*/Modules/
# or cmake provide a generic interface to pkg-config that widely used
###################################
include(FindPkgConfig)
pkg_search_module(LIBXML2 libxml-2.0 REQUIRED)
include_directories(${LIBXML2_INCLUDE_DIRS})
pkg_search_module(LIBXSLT libxslt REQUIRED)
include_directories(${LIBXSLT_INCLUDE_DIRS})
pkg_search_module(OPENSSL openssl REQUIRED)
include_directories(${OPENSSL_INCLUDE_DIRS})
pkg_search_module(CONFIG libconfig REQUIRED)
include_directories(${CONFIG_INCLUDE_DIRS})
pkg_search_module(CRYPTO libcrypto REQUIRED)
include_directories(${CRYPTO_INCLUDE_DIRS})
#use native cmake method as this package is not in pkg-config
if (${RF_BOARD} STREQUAL "OAI_USRP")
find_package(Boost REQUIRED)
include_directories(${LIBBOOST_INCLUDE_DIR})
endif (${RF_BOARD} STREQUAL "OAI_USRP")
pkg_search_module(OPENPGM openpgm-5.1 openpgm-5.2)
if(NOT ${OPENPGM_FOUND})
message("PACKAGE openpgm-5.1 is required by binaries such as oaisim: will fail later if this target is built")
else()
include_directories(${OPENPGM_INCLUDE_DIRS})
endif()
pkg_search_module(NETTLE nettle)
if(NOT ${NETTLE_FOUND})
message( FATAL_ERROR "PACKAGE nettle not found: some targets will fail. Run build_oai -I again!")
else()
include_directories(${NETTLE_INCLUDE_DIRS})
endif()
message ("NETTLE VERSION_INSTALLED = ${NETTLE_VERSION}")
string(REGEX REPLACE "([0-9]+).*" "\\1" NETTLE_VERSION_MAJOR ${NETTLE_VERSION})
string(REGEX REPLACE "[0-9]+\\.([0-9]+).*" "\\1" NETTLE_VERSION_MINOR ${NETTLE_VERSION})
message ("NETTLE_VERSION_MAJOR = ${NETTLE_VERSION_MAJOR}")
message ("NETTLE_VERSION_MINOR = ${NETTLE_VERSION_MINOR}")
if ("${NETTLE_VERSION_MAJOR}" STREQUAL "" OR "${NETTLE_VERSION_MINOR}" STREQUAL "")
message( FATAL_ERROR "The nettle version not detected properly. Try to run build_oai -I again" )
endif()
add_definitions("-DNETTLE_VERSION_MAJOR=${NETTLE_VERSION_MAJOR}")
add_definitions("-DNETTLE_VERSION_MINOR=${NETTLE_VERSION_MINOR}")
pkg_search_module(XPM xpm)
if(NOT ${XPM_FOUND})
message("PACKAGE xpm not found: some targets will fail")
else()
include_directories(${XPM_INCLUDE_DIRS})
endif()
# Atlas is required by some packages, but not found in pkg-config
# So, here are some hacks here. Hope this gets fixed in future!
if(EXISTS "/usr/include/atlas/cblas.h" OR EXISTS "/usr/include/cblas.h")
include_directories("/usr/include/atlas")
LINK_DIRECTORIES("/usr/lib/lapack")
LINK_DIRECTORIES("/usr/lib64") LINK_DIRECTORIES("/usr/lib64/atlas") #Added because atlas libraries in CentOS 7 are here!
if(EXISTS "/usr/lib64/libblas.so" OR EXISTS "/usr/lib/libblas.so") #Case for CentOS7
list(APPEND ATLAS_LIBRARIES blas)
else() # Case for Ubuntu
list(APPEND ATLAS_LIBRARIES cblas)
endif()
if(EXISTS "/usr/lib/atlas/libtatlas.so" OR EXISTS "/usr/lib64/atlas/libtatlas.so") #Case for CentOS7
list(APPEND ATLAS_LIBRARIES tatlas)
else()
list(APPEND ATLAS_LIBRARIES atlas) #Case for Ubuntu
endif()
list(APPEND ATLAS_LIBRARIES lapack)
# for ubuntu 17.10, directories are different
elseif(EXISTS "/usr/include/x86_64-linux-gnu/cblas.h")
include_directories("/usr/include/x86_64-linux-gnu")
LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu")
list(APPEND ATLAS_LIBRARIES cblas)
list(APPEND ATLAS_LIBRARIES atlas)
list(APPEND ATLAS_LIBRARIES lapack)
else()
message("No Blas/Atlas libs found, some targets will fail")
endif()
list(APPEND ATLAS_LIBRARIES lapack lapacke)
if (${XFORMS})
include_directories ("/usr/include/X11")
set(XFORMS_SOURCE
${OPENAIR1_DIR}/PHY/TOOLS/lte_phy_scope.c
)
set(XFORMS_SOURCE_SOFTMODEM
${OPENAIR_TARGETS}/RT/USER/stats.c
)
set(XFORMS_LIBRARIES "forms")
endif (${XFORMS})
set(CMAKE_MODULE_PATH "${OPENAIR_DIR}/cmake_targets/tools/MODULES" "${CMAKE_MODULE_PATH}")
#include T directory even if the T is off because T macros are in the code
#no matter what
include_directories("${OPENAIR_DIR}/common/utils/T")
if (${T_TRACER})
set(T_SOURCE
${OPENAIR_DIR}/common/utils/T/T.c
${OPENAIR_DIR}/common/utils/T/local_tracer.c)
set (T_LIB "rt")
endif (${T_TRACER})
#Some files in the T directory are generated.
#This rule and the following deal with it.
add_custom_command (
OUTPUT ${OPENAIR_DIR}/common/utils/T/T_IDs.h
COMMAND $(MAKE) clean
COMMAND $(MAKE)
COMMAND $(MAKE) check_vcd
WORKING_DIRECTORY ${OPENAIR_DIR}/common/utils/T
DEPENDS ${OPENAIR_DIR}/common/utils/T/T_messages.txt
${OPENAIR_DIR}/common/utils/LOG/vcd_signal_dumper.c
${OPENAIR_DIR}/common/utils/LOG/vcd_signal_dumper.h
)
#This rule is specifically needed to generate T files#before anything else in a project that uses the T.
#See below, there are some 'add_dependencies' showing that.
#Basically we create a custom target and we make other
#targets depend on it. That forces cmake to generate
#T files before anything else.
add_custom_target (
generate_T
DEPENDS ${OPENAIR_DIR}/common/utils/T/T_IDs.h
)
# Hack on a test of asn1c version (already dirty)
add_definitions(-DASN1_MINIMUM_VERSION=924)
#################################
# add executables for operation
#################################
# lte-softmodem is both eNB and UE implementation
###################################################
add_executable(lte-softmodem
${rrc_h}
${s1ap_h}
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-enb.c
${OPENAIR_TARGETS}/RT/USER/lte-ru.c
${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${GTPU_need_ITTI}
${XFORMS_SOURCE}
${XFORMS_SOURCE_SOFTMODEM}
${T_SOURCE}
${CONFIG_SOURCES}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries (lte-softmodem
-Wl,--start-group
RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU LFDS L2
${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} ${FLEXRAN_AGENT_LIB} LFDS7
NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
-Wl,--end-group z dl)
target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES})
target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${XFORMS_LIBRARIES} ${PROTOBUF_LIB} ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES})
target_link_libraries (lte-softmodem ${LIB_LMS_LIBRARIES})
target_link_libraries (lte-softmodem ${T_LIB})
# lte-softmodem-nos1 is both eNB and UE implementation
###################################################
add_executable(lte-softmodem-nos1
${rrc_h}
${s1ap_h}
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-enb.c
${OPENAIR_TARGETS}/RT/USER/lte-ru.c
${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c ${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
${OPENAIR_DIR}/common/utils/system.c
${XFORMS_SOURCE}
${XFORMS_SOURCE_SOFTMODEM}
${T_SOURCE}
${CONFIG_SOURCES}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries (lte-softmodem-nos1
-Wl,--start-group
RRC_LIB SECU_CN SECU_OSA UTIL HASHTABLE SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU LFDS L2 ${MSC_LIB} ${RAL_LIB} ${ITTI_LIB}
${MIH_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} ${FLEXRAN_AGENT_LIB} LFDS7
NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
-Wl,--end-group z dl )
target_link_libraries (lte-softmodem-nos1 ${LIBXML2_LIBRARIES})
target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${XFORMS_LIBRARIES} ${PROTOBUF_LIB} ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES})
target_link_libraries (lte-softmodem-nos1 ${LIB_LMS_LIBRARIES})
target_link_libraries (lte-softmodem-nos1 ${T_LIB})
# lte-uesoftmodem is UE implementation
#######################################
add_executable(lte-uesoftmodem
${rrc_h}
${s1ap_h}
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-ue.c
${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
${OPENAIR_TARGETS}/RT/USER/lte-ru.c
${OPENAIR_TARGETS}/RT/USER/rfsim.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/COMMON/create_tasks_ue.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${XFORMS_SOURCE}
${XFORMS_SOURCE_SOFTMODEM}
${T_SOURCE}
${CONFIG_SOURCES}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries (lte-uesoftmodem
-Wl,--start-group
RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU
${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} LFDS7 ${ATLAS_LIBRARIES}
NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
-Wl,--end-group z dl)
target_link_libraries (lte-uesoftmodem ${LIBXML2_LIBRARIES})
target_link_libraries (lte-uesoftmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${XFORMS_LIBRARIES} ${PROTOBUF_LIB} ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
target_link_libraries (lte-uesoftmodem ${LIB_LMS_LIBRARIES})
target_link_libraries (lte-uesoftmodem ${T_LIB})
# lte-uesoftmodem-nos1 is UE implementation
###################################################
add_executable(lte-uesoftmodem-nos1
${rrc_h}
${s1ap_h}
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-ue.c ${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
${OPENAIR_TARGETS}/RT/USER/lte-ru.c
${OPENAIR_TARGETS}/RT/USER/rfsim.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/COMMON/create_tasks_ue.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${XFORMS_SOURCE}
${XFORMS_SOURCE_SOFTMODEM}
${T_SOURCE}
${CONFIG_SOURCES}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries (lte-uesoftmodem-nos1
-Wl,--start-group
RRC_LIB SECU_CN SECU_OSA UTIL HASHTABLE SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU ${MSC_LIB} ${RAL_LIB} ${ITTI_LIB}
${MIH_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} LFDS7 ${ATLAS_LIBRARIES}
NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
-Wl,--end-group z dl )
target_link_libraries (lte-uesoftmodem-nos1 ${LIBXML2_LIBRARIES})
target_link_libraries (lte-uesoftmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${XFORMS_LIBRARIES} ${PROTOBUF_LIB} ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
target_link_libraries (lte-uesoftmodem-nos1 ${LIB_LMS_LIBRARIES})
target_link_libraries (lte-uesoftmodem-nos1 ${T_LIB})
# USIM process
#################
#add_executable(usim
# ${OPENAIR3_DIR}/NAS/TOOLS/usim_data.c
# ${OPENAIR3_DIR}/NAS/USER/API/USIM/usim_api.c
# ${OPENAIR3_DIR}/NAS/USER/API/USIM/aka_functions.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/memory.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/nas_log.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/OctetString.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/TLVEncoder.c
# )
#target_link_libraries (usim ${NAS_LIB} UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
# ???
#####################
#add_executable(nvram
# ${OPENAIR3_DIR}/NAS/TOOLS/ue_data.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/memory.c
# ${OPENAIR3_DIR}/NAS/COMMON/UTIL/nas_log.c
# )
#target_link_libraries (nvram LIB_NAS_UE UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
###################################"
# Addexecutables for tests
####################################
# Unitary tests for each piece of L1: example, mbmssim is MBMS L1 simulator
#####################################
#special case for dlim TM4, which uses its own version of phy_scope code
add_executable(dlsim_tm4
${OPENAIR1_DIR}/SIMULATION/LTE_PHY/dlsim_tm4.c
${OPENAIR1_DIR}/PHY/TOOLS/lte_phy_scope_tm4.c
${T_SOURCE}
)
target_link_libraries (dlsim_tm4 -Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB PHY LFDS ${ITTI_LIB} -Wl,--end-group
pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${T_LIB}
)
foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
add_executable(${myExe}
${OPENAIR1_DIR}/SIMULATION/LTE_PHY/${myExe}.c
${XFORMS_SOURCE}
${T_SOURCE}
${CONFIG_SOURCES}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries (${myExe}
-Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY PHY_UE PHY_RU LFDS ${ITTI_LIB} LFDS7 -Wl,--end-group
pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${T_LIB} dl
)
endforeach(myExe)
add_executable(test_epc_generate_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.c
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.h
${OPENAIR2_DIR}/ENB_APP/enb_config.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
${OPENAIR3_DIR}/S1AP/s1ap_eNB_defs.h
)
target_link_libraries (test_epc_generate_scenario
-Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
add_executable(test_epc_play_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_decode.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_display.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_fsm.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_parse.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_compare_ie.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_eNB_defs.h
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_sctp.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
)
target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
target_link_libraries (test_epc_play_scenario
-Wl,--start-group RRC_LIB S1AP_LIB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY_COMMON PHY PHY_UE LFDS ${ITTI_LIB} ${MSC_LIB} -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
#unitary tests for Core NEtwork pieces
#################################
foreach(myExe s1ap
secu_knas_encrypt_eia1
secu_kenb
aes128_ctr_encrypt
aes128_ctr_decrypt
secu_knas_encrypt_eea2
secu_knas secu_knas_encrypt_eea1
kdf
aes128_cmac_encrypt
secu_knas_encrypt_eia2)
add_executable(test_${myExe}
${OPENAIR3_DIR}/TEST/test_${myExe}.c
)
target_link_libraries (test_${myExe} -Wl,--start-group SECU_CN UTIL LFDS -Wl,--end-group m rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
endforeach(myExe)
# to be added
#../targets/TEST/PDCP/test_pdcp.c
#../targets/TEST/PDCP/with_rlc/test_pdcp_rlc.c
#ensure that the T header files are generated before targets depending on them
if (${T_TRACER})
foreach(i
#all "add_executable" definitions (except tests, rb_tool, updatefw)
lte-softmodem lte-softmodem-nos1 lte-uesoftmodem lte-uesoftmodem-nos1
dlsim_tm4 dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim
pdcchsim pucchsim prachsim syncsim ulsim
#all "add_library" definitions
ITTI RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB
oai_exmimodevif oai_usrpdevif oai_bladerfdevif oai_lmssdrdevif
oai_eth_transpro
FLPT_MSG ASYNC_IF FLEXRAN_AGENT HASHTABLE MSC UTIL OMG_SUMO SECU_OSA
SECU_CN SCHED_LIB PHY L2 default_sched remote_sched RAL CN_UTILS
GTPV1U SCTP_CLIENT UDP LIB_NAS_UE LFDS LFDS7 SIMU OPENAIR0_LIB PHY_MEX
coding)
if (TARGET ${i})
add_dependencies(${i} generate_T)
endif()
endforeach(i)
endif (${T_TRACER})
##################################################
# Generated specific cases is not regular code
###############################################
################
# Kernel modules
###############
# Set compiler options for kernel modules
# we need to get out cmake to use the regular Linux Kernel process
# this is documented as https://www.kernel.org/doc/Documentation/kbuild/modules.txt
######################################
# retrieve the compiler options to send it to gccxml
get_directory_property(DirDefs COMPILE_DEFINITIONS )
foreach( d ${DirDefs} )
set(module_cc_opt "${module_cc_opt} -D${d}")
endforeach()
get_directory_property( DirDefs INCLUDE_DIRECTORIES )
foreach( d ${DirDefs} )
set(module_cc_opt "${module_cc_opt} -I${d}")
endforeach()
EXECUTE_PROCESS(COMMAND uname -r
OUTPUT_VARIABLE os_release
OUTPUT_STRIP_TRAILING_WHITESPACE)
SET(module_build_path /lib/modules/${os_release}/build)
function(make_driver name dir)
file(MAKE_DIRECTORY ${OPENAIR_BIN_DIR}/${name})
foreach(f IN ITEMS ${ARGN})
list(APPEND src_path_list ${dir}/${f})
string(REGEX REPLACE "c *$" "o" obj ${f})
set(objs "${objs} ${obj}")
endforeach()
CONFIGURE_FILE(${OPENAIR_CMAKE}/tools/Kbuild.cmake ${OPENAIR_BIN_DIR}/${name}/Kbuild)
add_custom_command(OUTPUT ${name}.ko
COMMAND $(MAKE) -C ${module_build_path} M=${OPENAIR_BIN_DIR}/${name}
WORKING_DIRECTORY ${OPENAIR_BIN_DIR}/${name}
COMMENT "building ${module}.ko"
VERBATIM
SOURCES ${src_path_list} )
add_custom_target(${name} DEPENDS ${name}.ko)
endfunction(make_driver name dir src)
# nashmesh module
################
list(APPEND nasmesh_src device.c common.c ioctl.c classifier.c tool.c mesh.c)
set(module_cc_opt "${module_cc_opt} -DNAS_NETLINK -DPDCP_USE_NETLINK")
# legacy Makefile was using NAS_NETLINK flag, but other drivers the hereafter flag
# so, this cmake use OAI_NW_DRIVER_USE_NETLINK everywhere
if (OAI_NW_DRIVER_USE_NETLINK)
list(APPEND nasmesh_src netlink.c)
endif()
make_driver(nasmesh ${OPENAIR2_DIR}/NETWORK_DRIVER/MESH ${nasmesh_src})
# user space tool for configuring MESH IP driver
################
add_executable(rb_tool
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/constant.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/ioctl.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/rrc_nas_primitives.h
${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/RB_TOOL/rb_tool.c
)
target_include_directories(rb_tool PRIVATE ${OPENAIR2_DIR}/NETWORK_DRIVER/MESH/)
# ???
####################
list(APPEND oai_nw_drv_src device.c common.c ioctl.c classifier.c tool.c)
if(OAI_NW_DRIVER_USE_NETLINK)
list(APPEND oai_nw_drv_src netlink.c)
endif()
make_driver(oai_nw_drv ${OPENAIR2_DIR}/NETWORK_DRIVER/LTE ${oai_nw_drv_src})
# Exmimo board drivers
#########################
list(APPEND openair_rf_src module_main.c irq.c fileops.c exmimo_fw.c)
make_driver(openair_rf ${OPENAIR_TARGETS}/ARCH/EXMIMO/DRIVER/eurecom ${openair_rf_src})
add_executable(updatefw
${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw.c
)
# ue_ip: purpose ???
###############
list(APPEND ue_ip_src device.c common.c)
if(OAI_NW_DRIVER_USE_NETLINK)
list(APPEND ue_ip_src netlink.c)
endif()
make_driver(ue_ip ${OPENAIR2_DIR}/NETWORK_DRIVER/UE_IP ${ue_ip_src})
# OCTAVE tools
###############
set(OCT_INCL -I${OPENAIR_TARGETS}/ARCH/EXMIMO/DEFS -I${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB -I${OPENAIR_TARGETS}/ARCH/COMMON)
set(OCT_LIBS -L${CMAKE_CURRENT_BINARY_DIR} -lm -lOPENAIR0_LIB)
set(OCT_FLAGS -DEXMIMO)
set(OCT_DIR ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OCTAVE)
set(OCT_FILES
oarf_config_exmimo.oct
oarf_config_exmimo.oct
oarf_get_frame.oct
oarf_stop.oct
oarf_send_frame.oct
oarf_get_num_detected_cards.oct
oarf_stop_without_reset.oct
)
foreach(file IN ITEMS ${OCT_FILES})
string(REGEX REPLACE "oct *$" "cc" src ${file})
add_custom_command( OUTPUT ${file}
DEPENDS ${OCT_DIR}/${src} OPENAIR0_LIB
COMMAND mkoctfile
ARGS ${OCT_FLAGS} ${OCT_INCL} ${OCT_LIBS}
ARGS -o ${file} ${OCT_DIR}/${src}
COMMENT "Generating ${file}"
VERBATIM
)
endforeach(file)
ADD_CUSTOM_TARGET(oarf
DEPENDS ${OCT_FILES}
)
include (${OPENAIR_DIR}/common/utils/telnetsrv/telnetsrv_CMakeLists.txt)