Forked from
oai / openairinterface5G
26528 commits behind the upstream repository.
-
nikaeinn authored
git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6631 818b1a75-f10b-46b9-bf7c-635c3b92a50f
nikaeinn authoredgit-svn-id: http://svn.eurecom.fr/openair4G/trunk@6631 818b1a75-f10b-46b9-bf7c-635c3b92a50f
build_helper.bash 41.03 KiB
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
################################################################################
# file build_helper.bash
# brief
# author Lionel Gauthier and Navid Nikaein
# company Eurecom
# email: lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr
#
#######################################
# Helper Func
######################################
declare ROOT_UID=0
declare E_NOTROOT=67
declare NUM_CPU=`cat /proc/cpuinfo | grep processor | wc -l`
declare OAI_INSTALLED=1
declare PWD=`pwd`
declare USER=`whoami`
declare BUILD_FROM_MAKEFILE=0
declare SUDO=''
declare PW=''
declare UBUNTU_REL=`lsb_release -r | cut -f2`
declare UBUNTU_REL_NAME=`lsb_release -cs`
set_build_from_makefile(){
BUILD_FROM_MAKEFILE=$1
}
check_for_root_rights() {
# if [[ $EUID -ne $ROOT_EUID ]]; then
if [ $USER != "root" ]; then
SUDO="sudo -E "
echo "Run as a sudoers"
return 1
else
echo "Run as a root"
return 0
fi
}
test_install_package() {
# usage: test_install_package package_name
if [ $# -eq 1 ]; then
dpkg -s "$1" > /dev/null 2>&1 && {
echo "$1 is installed."
} || {
echo "$1 is not installed."
OAI_INSTALLED=0
$SUDO apt-get install -y $@
}
fi
}
test_uninstall_package() {
if [ $# -eq 1 ]; then
dpkg -s "$1" > /dev/null 2>&1 && {
$SUDO apt-get remove --assume-yes $1
echo "$1 is uninstalled."
} || {
echo "$1 is not installed."
}
fi
}
test_command_install_script() {
# usage: test_command_install_script searched_binary script_to_be_invoked_if_binary_not_found
command -v $1 >/dev/null 2>&1 || { echo_warning "Program $1 is not installed. Trying installing it." >&2; bash $2; command -v $1 >/dev/null 2>&1 || { echo_fatal "Program $1 is not installed. Aborting." >&2; };}
echo_success "$1 available"
}
check_for_machine_type(){
MACHINE_TYPE=`uname -m`
if [ ${MACHINE_TYPE} = "x86_64" ]; then
return 64 # 64-bit stuff here
else
if [ ${MACHINE_TYPE} = "i686" ]; then
return 32 # 32-bit stuff here
else
return -1
fi
fi
}
####################################################
## OAI related functions
#####################################################
####################################################
# 1. install the required packages
####################################################
make_certs(){
# for certtificate generation
rm -rf demoCA
mkdir -m 777 -p demoCA
echo 01 > demoCA/serial
touch demoCA/index.txt
echo "creating the certificate"
user=$(whoami)
HOSTNAME=$(hostname -f)
echo "Creating certificate for user '$HOSTNAME'"
# CA self certificate
openssl req -new -batch -x509 -days 3650 -nodes -newkey rsa:1024 -out cacert.pem -keyout cakey.pem -subj /CN=eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
# openssl genrsa -out user.key.pem 1024
openssl genrsa -out hss.key.pem 1024
#openssl req -new -batch -out user.csr.pem -key user.key.pem -subj /CN=$HOSTNAME.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
openssl req -new -batch -out hss.csr.pem -key hss.key.pem -subj /CN=hss.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
openssl ca -cert cacert.pem -keyfile cakey.pem -in hss.csr.pem -out hss.cert.pem -outdir . -batch
if [ ! -d /usr/local/etc/freeDiameter ]; then
echo "Creating non existing directory: /usr/local/etc/freeDiameter/"
$SUDO mkdir /usr/local/etc/freeDiameter/
fi
echo "Copying *.pem to /usr/local/etc/freeDiameter/"
$SUDO cp *.pem /usr/local/etc/freeDiameter/
mv *.pem bin/
# openssl genrsa -out ubuntu.key.pem 1024
# openssl req -new -batch -x509 -out ubuntu.csr.pem -key ubuntu.key.pem -subj /CN=ubuntu.localdomain/C=FR/ST=BdR/L=Aix/O=fD/OU=Tests
# openssl ca -cert cacert.pem -keyfile cakey.pem -in ubuntu.csr.pem -out ubuntu.cert.pem -outdir . -batch
}
check_install_nettle(){
if [ ! -f ./.lock_oaibuild ]; then
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
if [ ! -d /usr/local/src/ ]; then
echo "/usr/local/src/ doesn't exist please create one"
exit -1
fi
if [ ! -w /usr/local/src/ ]; then
echo "You don't have permissions to write to /usr/local/src/, installing as a sudoer"
# exit -1
fi
cd /usr/local/src/
echo "Downloading nettle archive"
if [ -f nettle-2.5.tar.gz ]; then
$SUDO rm -f nettle-2.5.tar.gz
fi
if [ -f nettle-2.5.tar ]; then
$SUDO rm -f nettle-2.5.tar
fi
if [ -d nettle-2.5 ]; then
$SUDO rm -rf nettle-2.5/
fi
$SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
$SUDO gunzip nettle-2.5.tar.gz
$SUDO echo "Uncompressing nettle archive"
$SUDO tar -xf nettle-2.5.tar
cd nettle-2.5/
$SUDO ./configure --disable-openssl --enable-shared --prefix=/usr
if [ $? -ne 0 ]; then
exit -1
fi
echo "Compiling nettle"
$SUDO make -j $NUM_CPU
$SUDO make check
$SUDO make install
cd ../
fi
fi
}
check_install_freediamter(){
if [ $UBUNTU_REL = "12.04" ]; then
if [ ! -d /usr/local/src/ ]; then
echo "/usr/local/src/ doesn't exist please create one"
exit -1
fi
if [ ! -w /usr/local/src/ ]; then
echo "You don't have permissions to write to /usr/local/src/, installing as a sudoer"
# exit -1
fi
cd /usr/local/src/
echo "Downloading nettle archive"
if [ -f nettle-2.5.tar.gz ]; then
$SUDO rm -f nettle-2.5.tar.gz
fi
if [ -f nettle-2.5.tar ]; then
$SUDO rm -f nettle-2.5.tar
fi
if [ -d nettle-2.5 ]; then
$SUDO rm -rf nettle-2.5/
fi
$SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
$SUDO gunzip nettle-2.5.tar.gz
$SUDO echo "Uncompressing nettle archive"
$SUDO tar -xf nettle-2.5.tar
cd nettle-2.5/
$SUDO ./configure --disable-openssl --enable-shared --prefix=/usr
if [ $? -ne 0 ]; then
exit -1
fi
echo "Compiling nettle"
$SUDO make -j $NUM_CPU
$SUDO make check
$SUDO make install
cd ../
fi
echo "Downloading gnutls archive"
if [ -f gnutls-3.1.23.tar.xz ]; then
$SUDO rm -f gnutls-3.1.23.tar.xz
fi
if [ -d gnutls-3.1.23/ ]; then
$SUDO rm -rf gnutls-3.1.23/
fi
test_uninstall_package libgnutls-dev
$SUDO wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
$SUDO tar -xf gnutls-3.1.23.tar.xz
echo "Uncompressing gnutls archive ($PWD)"
cd gnutls-3.1.23/
$SUDO ./configure --prefix=/usr
if [ $? -ne 0 ]; then
exit -1
fi
echo "Compiling gnutls"
$SUDO make -j $NUM_CPU
$SUDO make install
cd ../
echo "Downloading freeDiameter archive"
if [ -f 1.1.5.tar.gz ]; then
$SUDO rm -f 1.1.5.tar.gz
fi
if [ -d freeDiameter-1.1.5/ ]; then
$SUDO rm -rf freeDiameter-1.1.5/
fi
$SUDO wget http://www.freediameter.net/hg/freeDiameter/archive/1.1.5.tar.gz
$SUDO tar -xzf 1.1.5.tar.gz
echo "Uncompressing freeDiameter archive"
cd freeDiameter-1.1.5
$SUDO patch -p1 < $OPENAIRCN_DIR/S6A/freediameter/freediameter-1.1.5.patch
$SUDO mkdir build
cd build
$SUDO cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ../
if [ $? -ne 0 ]; then
exit -1
fi
echo "Compiling freeDiameter"
$SUDO make -j $NUM_CPU
#make help
$SUDO make test
$SUDO sudo make install
# make_certs
}
test_is_host_reachable() {
ping -c 1 $1 > /dev/null || { echo_fatal "$2 host $1 does not respond to ping" >&2 ; }
echo_success "$2 host $1 is reachable"
}
check_epc_s6a_certificate() {
if [ -d /usr/local/etc/freeDiameter ]
then
if [ -f /usr/local/etc/freeDiameter/user.cert.pem ]
then
full_hostname=`cat /usr/local/etc/freeDiameter/user.cert.pem | grep "Subject" | grep "CN" | cut -d '=' -f6`
if [ a$full_hostname == a`hostname`.${1:-'eur'} ]
then
echo_success "EPC S6A: Found valid certificate in /usr/local/etc/freeDiameter"
return 0
fi
fi
fi
echo_error "EPC S6A: Did not find valid certificate in /usr/local/etc/freeDiameter"
echo_warning "EPC S6A: generatting new certificate in /usr/local/etc/freeDiameter..."
cd $OPENAIRCN_DIR/S6A/freediameter
./make_certs.sh ${1:-'eur'}
if [ $# -lt 2 ] ; then
check_epc_s6a_certificate ${1:-'eur'} 2
return $?
else
exit 1
fi
}
check_hss_s6a_certificate() {
if [ -d /usr/local/etc/freeDiameter ]; then
if [ -f /usr/local/etc/freeDiameter/hss.cert.pem ]; then
full_hostname=`cat /usr/local/etc/freeDiameter/hss.cert.pem | grep "Subject" | grep "CN" | cut -d '=' -f6`
if [ a$full_hostname == a`hostname`.${1:-'eur'} ]
then
echo_success "HSS S6A: Found valid certificate in /usr/local/etc/freeDiameter"
return 0
else
echo_error "Bad hss hostname found in cert file: "$full_hostname " hostname is "`hostname`
fi
fi
fi
echo_error "S6A: Did not find valid certificate in /usr/local/etc/freeDiameter"
echo_warning "S6A: generatting new certificate in /usr/local/etc/freeDiameter..."
cd $OPENAIRCN_DIR/OPENAIRHSS/conf
./make_certs.sh ${1:-'eur'}
if [ $# -lt 2 ] ; then
check_hss_s6a_certificate ${1:-'eur'} 2
return $?
else
exit 1
fi
}
check_install_usrp_uhd_driver(){
if [ ! -f /etc/apt/sources.list.d/ettus.list ] ; then
$SUDO bash -c 'echo "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/`lsb_release -cs` `lsb_release -cs` main" >> /etc/apt/sources.list.d/ettus.list'
$SUDO apt-get update
fi
$SUDO apt-get install -t $UBUNTU_REL_NAME uhd
test_install_package python
test_install_package libboost-all-dev
test_install_package libusb-1.0-0-dev
#test_install_package uhd
}
check_install_oai_software() {
if [ ! -f ./.lock_oaibuild ]; then
$SUDO apt-get update
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
else
test_install_package nettle-dev
test_install_package nettle-bin
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
test_install_package build-essential
test_install_package dialog
test_install_package flex
test_install_package gawk
test_install_package gcc
test_install_package gdb
test_install_package make
test_install_package cmake
test_install_package openssh-client
test_install_package openssh-server
sudo service ssh start
test_install_package unzip
test_install_package autoconf
test_install_package automake
test_install_package bison
test_install_package build-essential
test_install_package check
test_install_package ethtool
test_install_package flex
test_install_package g++
test_install_package gawk
test_install_package gcc
test_install_package gccxml
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package iperf
test_install_package iproute
test_install_package iptables
test_install_package libatlas-base-dev
test_install_package libatlas-dev
test_install_package libblas3gf
test_install_package libblas-dev
# if [ $MACHINE_ARCH = 64 ]; then
test_install_package libconfig8-dev
# else
# test_install_package libconfig-dev
# fi
test_install_package libforms-bin
test_install_package libforms-dev
test_install_package libgcrypt11-dev
test_install_package libgmp-dev
test_install_package libgtk-3-dev
test_install_package libidn11-dev
test_install_package libidn2-0-dev
test_install_package libpgm-dev
test_install_package libpgm-5.1-0
test_install_package libpthread-stubs0-dev
test_install_package libsctp1
test_install_package libsctp-dev
test_install_package libtasn1-3-dev
test_install_package libxml2
test_install_package libxml2-dev
# test_install_package linux-headers-`uname -r`
test_install_package openssl
test_install_package libssl-dev
test_install_package pkg-config
test_install_package python-dev
test_install_package python-pexpect
test_install_package sshfs
test_install_package subversion
test_install_package valgrind
test_install_package doxygen
test_install_package graphviz
# test_install_package libboost-all-dev
if [ $OAI_INSTALLED = 1 ]; then
touch ./.lock_oaibuild
fi
else
echo_info "All the required packages installed: skip"
fi
}
check_install_hss_software() {
if [ ! -f ./.lock_oaibuild ]; then
$SUDO apt-get update
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
else
test_install_package nettle-dev
test_install_package nettle-bin
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
test_install_package build-essential
test_install_package cmake
test_install_package cmake-curses-gui
test_install_package dialog
test_install_package dkms
test_install_package flex
test_install_package gawk
test_install_package gcc
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package g++
test_install_package libgmp-dev
test_install_package libgcrypt11-dev
test_install_package libidn11-dev
test_install_package libidn2-0-dev
test_install_package libmysqlclient-dev
test_install_package libtasn1-3-dev
test_install_package libsctp1
test_install_package libsctp-dev
test_install_package libxml2-dev
# test_install_package linux-headers-`uname -r`
test_install_package make
test_install_package mysql-client
test_install_package mysql-server-core-5.5
test_install_package mysql-server
test_install_package openssh-client
test_install_package openssh-server
sudo service ssh start
test_install_package phpmyadmin
test_install_package python-dev
test_install_package sshfs
test_install_package swig
test_install_package unzip
# test_install_package nettle-bin
# test_install_package nettle-dev
test_install_package valgrind
if [ $OAI_INSTALLED = 1 ]; then
touch ./.lock_oaibuild
fi
else
echo_info "All the required packages installed: skip"
fi
}
check_install_epc_software() {
if [ ! -f ./.lock_oaibuild ]; then
$SUDO apt-get update
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
else
test_install_package nettle-dev
test_install_package nettle-bin
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
test_install_package build-essential
test_install_package check
test_install_package cmake
test_install_package cmake-curses-gui
test_install_package dialog
test_install_package ethtool
test_install_package flex
test_install_package g++
test_install_package gawk
test_install_package gcc
test_install_package gccxml
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package gtkwave
test_install_package iperf
test_install_package iproute
test_install_package iptables
test_install_package iptables-dev
test_install_package libatlas-base-dev
test_install_package libatlas-dev
test_install_package libblas
test_install_package libblas-dev
# if [ $MACHINE_ARCH = 64 ]; then
test_install_package libconfig8-dev
# else
# test_install_package libconfig-dev
# fi
test_install_package libforms-bin
test_install_package libforms-dev
test_install_package libgcrypt11-dev
test_install_package libgmp-dev
test_install_package libgtk-3-dev
test_install_package libidn11-dev
test_install_package libidn2-0-dev
test_install_package libmysqlclient-dev
test_install_package libpgm-dev
test_install_package libpthread-stubs0-dev
test_install_package libsctp1
test_install_package libsctp-dev
test_install_package libssl-dev
test_install_package libtasn1-3-dev
test_install_package libtool
test_install_package libxml2
test_install_package libxml2-dev
# test_install_package linux-headers-`uname -r`
test_install_package make
test_install_package openssh-client
test_install_package openssh-server
$SUDO service ssh start
test_install_package openssl
test_install_package openvpn
test_install_package pkg-config
test_install_package python-dev
test_install_package sshfs
test_install_package subversion
test_install_package swig
test_install_package tshark
test_install_package uml-utilities
test_install_package unzip
test_install_package valgrind
test_install_package vlan
if [ $OAI_INSTALLED = 1 ]; then
touch ./.lock_oaibuild
fi
else
echo_info "All the required packages installed: skip"
fi
}
check_install_asn1c(){
test_command_install_script "asn1c" "$OPENAIR_TARGETS/SCRIPTS/install_asn1c_0.9.24.modified.bash $SUDO"
# One mor check about version of asn1c
ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE="ASN.1 Compiler, v0.9.24"
ASN1C_COMPILER_VERSION_MESSAGE=`asn1c -h 2>&1 | grep -i ASN\.1\ Compiler`
##ASN1C_COMPILER_VERSION_MESSAGE=`trim $ASN1C_COMPILER_VERSION_MESSAGE`
if [ "$ASN1C_COMPILER_VERSION_MESSAGE" != "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE" ]; then
# diff <(echo -n "$ASN1C_COMPILER_VERSION_MESSAGE") <(echo -n "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE")
echo_error "Version of asn1c is not the required one, do you want to install the required one (overwrite installation) ? (Y/n)"
echo_error "$ASN1C_COMPILER_VERSION_MESSAGE"
while read -r -n 1 -s answer; do
if [[ $answer = [YyNn] ]]; then
[[ $answer = [Yy] ]] && $OPENAIR_TARGETS/SCRIPTS/install_asn1c_0.9.24.modified.bash $SUDO
[[ $answer = [Nn] ]] && echo_error "Version of asn1c is not the required one, exiting." && exit 1
break
fi
done
fi
}
#################################################
# 2. compile
################################################
compile_hss() {
cd $OPENAIRCN_DIR/OPENAIRHSS
if [ "$1" -eq 1 ]; then
echo_info "build a clean HSS"
rm -rfv obj*
rm -rfv m4
rm -rfv .autom4*
rm -fv configure
fi
OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*`
if [ ! -n "$OBJ_DIR" ]; then
OBJ_DIR="objs"
mkdir --verbose -m 777 ./$OBJ_DIR
else
OBJ_DIR=`basename $OBJ_DIR`
fi
if [ ! -f "$OBJ_DIR"/Makefile ]; then
if [ ! -d m4 ]; then
mkdir --verbose -m 777 m4
fi
echo_success "Invoking autogen"
./autogen.sh
if [ $? -ne 0 ]; then
return 1
fi
cd $OBJ_DIR
echo_success "Invoking configure"
../configure
if [ $? -ne 0 ]; then
return 1
fi
else
cd $OBJ_DIR
fi
if [ -f Makefile ]; then
echo_success "Compiling..."
make ; #-j $NUM_CPU
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
return 1
else
return 0
fi
else
echo_error "Configure failed, aborting"
fi
return 1
}
compile_epc() {
cd $OPENAIRCN_DIR
if [ $1 = 1 ]; then
echo_info "build a clean EPC"
bash_exec "rm -rf objs"
fi
OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*`
if [ ! -n "$OBJ_DIR" ]; then
OBJ_DIR="objs"
bash_exec "mkdir -m 777 ./$OBJ_DIR"
echo_success "Created $OBJ_DIR directory"
else
OBJ_DIR=`basename $OBJ_DIR`
fi
if [ ! -f $OBJ_DIR/Makefile ]; then
if [ ! -n "m4" ]; then
mkdir -m 777 m4
fi
bash_exec "autoreconf -i -f"
echo_success "Invoking autogen"
bash_exec "libtoolize"
bash_exec "./autogen.sh"
cd ./$OBJ_DIR
echo_success "Invoking configure"
if [ $DEBUG -ne 0 ]; then
../configure --enable-debug --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib
else
../configure --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib
fi
else
cd ./$OBJ_DIR
fi
# pkill oai_epc
# pkill tshark
if [ -f Makefile ]; then
echo_success "Compiling..."
make -j $NUM_CPU
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
return 1
else
cp -pf ./OAI_EPC/oai_epc $OPENAIR_TARGETS/bin
fi
else
echo_error "Configure failed, exiting"
return 1
fi
cd $OPENAIRCN_DIR/GTPV1-U/GTPUAH;
make
if [ $? -ne 0 ]; then
echo_error "Build GTPUAH module failed, exiting"
return 1
else
$SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables
$SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin
fi
cd $OPENAIRCN_DIR/GTPV1-U/GTPURH;
make
if [ $? -ne 0 ]; then
echo_error "Build GTPURH module failed, exiting"
return 1
else
$SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables
$SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin
fi
return 0
}
compile_exmimo2_driver() {
cd $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom && make clean && make || exit 1
cd $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make || exit 1
# TO DO CHECKS...
}
compile_ltesoftmodem() {
cd $OPENAIR_TARGETS/RT/USER
if [ -f Makefile ]; then
rm -f ./lte-softmodem
echo "LTE softmodem compiling directives: $SOFTMODEM_DIRECTIVES"
if [ $OAI_CLEAN -ne 0 ]; then
echo "Cleaning LTE softmodem"
make cleanall > /dev/null 2>&1
fi
make -j $NUM_CPU $SOFTMODEM_DIRECTIVES
if [ $? -ne 0 ]; then
# to locate easily compilation error in log file
make $SOFTMODEM_DIRECTIVES
fi
if [ $? -ne 0 ]; then
if [ ! -f ./lte-softmodem ]; then
echo_error "Build lte-softmodem failed, returning"
return 1
else
cp -pf ./lte-softmodem $OPENAIR_TARGETS/bin
return 0
fi
else
cp -pf ./lte-softmodem $OPENAIR_TARGETS/bin
return 0
fi
else
echo_error "make file for oai softmodem not found, returning"
return 1
fi
}
compile_oaisim() {
cd $OPENAIR_TARGETS/SIMU/USER
if [ -f Makefile ]; then
echo "Compiling for oaisim target ($OAISIM_DIRECTIVES)"
make cleanall > /dev/null
make -j $NUM_CPU $OAISIM_DIRECTIVES
if [ $? -ne 0 ]; then
echo_error "Build oaisim failed, returning"
return 1
else
cp -pf ./oaisim $OPENAIR_TARGETS/bin
return 0
fi
else
echo_error "Makefile not found for oaisim target, returning"
return 1
fi
}
compile_unisim() {
cd $OPENAIR1_DIR/SIMULATION/LTE_PHY
if [ -f Makefile ]; then
echo "Compiling for UNISIM target ..."
make cleanall
make -j $NUM_CPU all
if [ $? -ne 0 ]; then
echo_error "Build unisim failed, returning"
return 1
else
cp -pf ./dlsim $OPENAIR_TARGETS/bin
cp -pf ./ulsim $OPENAIR_TARGETS/bin
cp -pf ./pucchsim $OPENAIR_TARGETS/bin
cp -pf ./prachsim $OPENAIR_TARGETS/bin
cp -pf ./pdcchsim $OPENAIR_TARGETS/bin
cp -pf ./pbchsim $OPENAIR_TARGETS/bin
cp -pf ./mbmssim $OPENAIR_TARGETS/bin
return 0
fi
else
echo_error "Configure failed, exiting"
return 1
fi
}
compile_nas_tools() {
export NVRAM_DIR=$OPENAIR_TARGETS/bin
cd $NVRAM_DIR
if [ ! -f /tmp/nas_cleaned ]; then
echo_success "make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS/tools veryveryclean"
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS/tools veryveryclean
fi
echo_success "make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS/tools all"
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS/tools all
rm .ue.nvram
rm .usim.nvram
touch /tmp/nas_cleaned
}
compile_ue_ip_nw_driver() {
cd $OPENAIR2_DIR && make ue_ip.ko
}
################################################
# 1. check if the executable functions exist
###############################################
check_for_ltesoftmodem_executable() {
if [ ! -f $OPENAIR_TARGETS/RT/USER/lte-softmodem ]; then
echo_error "Cannot find lte-softmodem executable object in directory $OPENAIR_TARGETS/RT/USER"
echo_error "Check the compilation logs in bin/install_log.txt"
exit 1
fi
}
check_for_epc_executable() {
if [ ! -f $OPENAIRCN_DIR/objs/OAI_EPC/oai_epc ]; then
echo_error "Cannot find oai_epc executable object in directory $OPENAIRCN_DIR/objs/OAI_EPC/"
echo_fatal "Please make sure you have compiled OAI EPC with --enable-standalone-epc option"
fi
}
check_for_hss_executable() {
if [ ! -f $OPENAIRCN_DIR/OPENAIRHSS/objs/openair-hss ]; then
echo_error "Cannot find openair-hss executable object in directory $OPENAIRCN_DIR/OPENAIRHSS/objs/"
echo_fatal "Please make sure you have compiled OAI HSS"
fi
}
check_for_sgw_executable() {
if [ ! -f $OPENAIRCN_DIR/objs/OAI_SGW/oai_sgw ]; then
echo_error "Cannot find oai_sgw executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAI_SGW/"
echo_fatal "Please make sure you have compiled OAI EPC without --enable-standalone-epc option"
fi
}
check_for_oaisim_executable() {
if [ ! -f $OPENAIR_TARGETS/SIMU/USER/oaisim ]; then
echo_error "Cannot find oaisim executable object in directory $OPENAIR_TARGETS/SIMU/USER"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_dlsim_executable() {
if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/dlsim ]; then
echo_error "Cannot find dlsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_ulsim_executable() {
if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/ulsim ]; then
echo_error "Cannot find ulsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_pucchsim_executable() {
if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/pucchsim ]; then
echo_error "Cannot find pucchsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_prachsim_executable() {
if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/prachsim ]; then
echo_error "Cannot find prachsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_pdcchsim_executable() {
if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/pdcchsim ]; then
echo_error "Cannot find pdcchsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_pbchsim_executable() {
if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/pbchsim ]; then
echo_error "Cannot find pbchsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_mbmssim_executable() {
if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/mbmssim ]; then
echo_error "Cannot find mbmssim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY"
echo_error "Check the compilation logs in bin/install_log.txt"
fi
}
check_for_nas_ue_executable() {
if [ ! -f $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/UserProcess ]; then
echo_error "Cannot find UserProcess executable object in directory $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin"
echo_fatal "Check the compilation logs in bin/install_log.txt"
fi
}
################################################
# 1. check if the executable functions exist
###############################################
# arg1 is RT
# arg2 is HW
# arg3 is ENB_S1
install_ltesoftmodem() {
# RT
if [ $1 = "RTAI" ]; then
if [ ! -f /tmp/init_rt_done.tmp ]; then
echo_info " 8.1 Insert RTAI modules"
$SUDO insmod /usr/realtime/modules/rtai_hal.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_sched.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_sem.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_fifos.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_mbx.ko > /dev/null 2>&1
$SUDO touch /tmp/init_rt_done.tmp
$SUDO chmod 666 /tmp/init_rt_done.tmp
else
echo_warning " 8.1 RTAI modules already inserted"
fi
fi
#HW
if [ $2 = "EXMIMO" ]; then
echo_info " 8.2 [EXMIMO] creating RTAI fifos"
for i in `seq 0 64`; do
have_rtfX=`ls /dev/ |grep -c rtf$i`;
if [ "$have_rtfX" -eq 0 ] ; then
$SUDO mknod -m 666 /dev/rtf$i c 150 $i;
fi;
done
echo_info " 8.3 [EXMIMO] Build lte-softmodemdrivers"
cd $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom && make clean && make # || exit 1
cd $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make # || exit 1
echo_info " 8.4 [EXMIMO] Setup RF card"
cd $OPENAIR_TARGETS/RT/USER
. ./init_exmimo2.sh
else
if [ $2 = "USRP" ]; then
echo_info " 8.2 [USRP] "
fi
fi
# ENB_S1
if [ $3 = 0 ]; then
cd $OPENAIR2_DIR && make clean && make nasmesh_netlink.ko #|| exit 1
cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make # || exit 1
fi
}
# arg1 is ENB_S1 'boolean'
install_oaisim() {
if [ $1 = 0 ]; then
cd $OPENAIR2_DIR && make clean && make nasmesh_netlink.ko #|| exit 1
cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make # || exit 1
else
compile_ue_ip_nw_driver
install_nas_tools
fi
}
install_nas_tools() {
cd $OPENAIR_TARGETS/bin
if [ ! -f .ue.nvram ]; then
echo_success "generate .ue_emm.nvram .ue.nvram"
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --gen
fi
if [ ! -f .usim.nvram ]; then
echo_success "generate .usim.nvram"
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --gen
fi
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --print
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --print
}
install_nasmesh(){
echo_success "LOAD NASMESH IP DRIVER FOR UE AND eNB"
(cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make)
(cd $OPENAIR2_DIR && make clean && make nasmesh_netlink_address_fix.ko)
$SUDO rmmod nasmesh
$SUDO insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
}
##################################
# create HSS DB
################################
# arg 1 is mysql user (root)
# arg 2 is mysql password (linux)
# arg 3 is hss username (hssadmin)
# arg 4 is hss password (admin)
# arg 5 is database name (oai_db)
create_hss_database(){
EXPECTED_ARGS=5
E_BADARGS=65
MYSQL=`which mysql`
rv=0
if [ $# -ne $EXPECTED_ARGS ]
then
echo_fatal "Usage: $0 dbuser dbpass hssuser hsspass databasename"
rv=1
fi
set_openair_env
# removed %
#Q1="GRANT ALL PRIVILEGES ON *.* TO '$3'@'%' IDENTIFIED BY '$4' WITH GRANT OPTION;"
Q1="GRANT ALL PRIVILEGES ON *.* TO '$3'@'localhost' IDENTIFIED BY '$4' WITH GRANT OPTION;"
Q2="FLUSH PRIVILEGES;"
SQL="${Q1}${Q2}"
$MYSQL -u $1 --password=$2 -e "$SQL"
if [ $? -ne 0 ]; then
echo_error "$3 permissions failed"
return 1
else
echo_success "$3 permissions succeeded"
fi
Q1="CREATE DATABASE IF NOT EXISTS ${BTICK}$5${BTICK};"
SQL="${Q1}"
$MYSQL -u $3 --password=$4 -e "$SQL"
if [ $? -ne 0 ]; then
echo_error "$5 creation failed"
return 1
else
echo_success "$5 creation succeeded"
fi
# test if tables have been created
mysql -u $3 --password=$4 -e "desc $5.users" > /dev/null 2>&1
if [ $? -eq 1 ]; then
$MYSQL -u $3 --password=$4 $5 < $OPENAIRCN_DIR/OPENAIRHSS/db/oai_db.sql
if [ $? -ne 0 ]; then
echo_error "$5 tables creation failed"
return 1
else
echo_success "$5 tables creation succeeded"
fi
fi
return 0
}
################################
# set_openair_env
###############################
set_openair_env(){
fullpath=`readlink -f $BASH_SOURCE`
[ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
openair_path=${fullpath%/targets/*}
openair_path=${openair_path%/openair-cn/*}
openair_path=${openair_path%/openair[123]/*}
export OPENAIR_DIR=$openair_path
export OPENAIR_HOME=$openair_path
export OPENAIR1_DIR=$openair_path/openair1
export OPENAIR2_DIR=$openair_path/openair2
export OPENAIR3_DIR=$openair_path/openair3
export OPENAIRCN_DIR=$openair_path/openair-cn
export OPENAIR_TARGETS=$openair_path/targets
}
########################################
### print help
######################################
print_help(){
echo_success "Name : build_oai - install and build OAI"
echo_success "Usage: build_oai.bash -a -b -c -d -e RTAI -m -r REL8 -s -t OAISIM -w EXMIMO -x"
echo_success "-a | --doxygen : Enable doxygen for documentation (default disabled)"
echo_success "-b | --disable-s1 : Disable S1 interface for eNB (default enabled)"
echo_success "-c | --clean : Enable clean OAI build (default disabled)"
echo_success "-C | --config-file : Set the config file local path"
echo_success "-d | --debug : Enable debug mode (default disabled)"
echo_success "-D | --disable-check-installed-software : Disable the checking of installed software (default is check)"
echo_success "-e | --realtime : Set realtime mode: RTAI, NONE (default NONE)"
echo_success "-g | --run-with-gdb : Run the executable built by this script with gdb"
echo_success "-K | --itti-dump-file : Set the execution events trace file"
echo_success "-l | --build-target : Set the LTE build target: ENB,EPC,HSS,NONE (default ENB)"
echo_success "-m | --build-from-makefile : Enable build from the makefile (default disabled)"
echo_success "-r | --3gpp-release : Set the release: REL8, REL10 (default REL8)"
echo_success "-R | --run : Run the executable built by this script"
echo_success "-s | --check : Enable OAI testing and sanity check (default disabled)"
echo_success "-t | --enb-build-target : Set the eNB build target: ALL, SOFTMODEM,OAISIM,UNISIM (default ALL)"
echo_success "-V | --vcd : Log vcd events"
echo_success "-w | --hardware : Set the hardware platform: EXMIMO, USRP (also installs UHD driver), ETHERNET, NONE, (default EXMIMO)"
echo_success "-x | --xforms : Enable xforms (default disabled)"
echo_success "-z | --defaults : Set the default build options"
}
print_help_perf(){
echo_success "Name : perf_oai generate traffic and evaluate the performance "
echo_success "Usage: perf_oai.bash -l ITG "
echo_success "-l | --perf-app : Set Performance evaluation app: ITGS, ITGD,PING, OTG-OAISIM, OTG-CBA, (default PING)"
echo_success "-m | --owd : enable D-ITG one-way-delay meter (default disabled)"
echo_success "-e | --duration : set the duration of the experiment (default 60000ms)"
echo_success "-i | --idt-dist : set the distribution of the inter-departure time: CONSTANT, UNIFORM,EXPONENTIAL (default CONSTANT)"
echo_success "-s | --ps-dist : set the distribution of the inter-departure time (default CONSTANT, available options: UNIFORM,EXPONENTIAL)"
echo_success "-d | --dst : set the destination address (default 127.0.0.1)"
echo_success "-p | --dst-port : set the destination address (default NONE)"
echo_success "-t | --test : enable test mode to validate the functionality (default disabled)"
echo_success "-k | --keep-log-file : keep the log files (default disabled)"
}
###############################
## echo and family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
cecho() # Color-echo
# arg1 = message
# arg2 = color
{
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
if [ $BUILD_FROM_MAKEFILE = 0 ]; then
echo -e -n "$color$message$reset_color"
echo
else
echo "$message"
fi
return
}
echo_error() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
cecho "$my_string" $red
}
echo_fatal() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
echo_error "$my_string"
exit -1
}
echo_warning() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
cecho "$my_string" $yellow
}
echo_success() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
cecho "$my_string" $green
}
echo_info() {
local my_string=""
until [ -z "$1" ]
do
my_string="$my_string$1"
shift
done
cecho "$my_string" $blue
}
bash_exec() {
output=$($1 2>&1)
result=$?
if [ $result -eq 0 ]; then
echo_success "$1"
else
echo_error "$1: $output"
fi
}
wait_process_started () {
if [ -z "$1" ]; then
echo_error "WAITING FOR PROCESS START: NO PROCESS"
return 1
fi
ps -C $1 > /dev/null 2>&1
while [ $? -ne 0 ]; do
echo_warning "WAITING FOR $1 START"
sleep 2
ps -C $1 > /dev/null 2>&1
done
echo_success "PROCESS $1 STARTED"
return 0
}
is_process_started () {
if [ -z "$1" ]; then
echo_error "WAITING FOR PROCESS START: NO PROCESS"
return 1
fi
ps -C $1 > /dev/null 2>&1
if [ $? -ne 0 ]; then
echo_success "PROCESS $1 NOT STARTED"
return 1
fi
echo_success "PROCESS $1 STARTED"
return 0
}
assert() {
# If condition false
# exit from script with error message
E_PARAM_ERR=98
E_PARAM_FAILED=99
if [ -z "$2" ] ; then # Not enought parameters passed.
return $E_PARAM_ERR
fi
lineno=$2
if [ ! $1 ]; then
echo_error "Assertion failed: \"$1\""
echo_fatal "File \"$0\", line $lineno"
fi
}