RRC: add an option to enable measurement reports

In the configuration file, to enable measurements, add:

    enable_measurement_reports = "yes";

Note that if x2 is enabled then the option 'enable_measurement_reports'
is not taken into account and the measurements are enabled.

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.usrpx310.conf

@@ -142,6 +142,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band42.tm1.25PRB.iris030.conf

@@ -178,6 +178,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf

@@ -145,6 +145,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.iris030.conf

@@ -178,6 +178,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpb210.replay.conf

@@ -179,6 +179,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210-d2d.conf

@@ -179,6 +179,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf

@@ -179,6 +179,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210_ue_expansion.conf

@@ -146,6 +146,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band38.tm1.if4p5.50PRB.lo.conf

@@ -148,6 +148,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi-STUB.conf

@@ -148,6 +148,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi.conf

@@ -179,6 +179,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.50PRB.conf

@@ -148,6 +148,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.50PRB.lo.conf

@@ -147,6 +147,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */