Newer
Older
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $MBMS_STATUS -eq 0 ]
then
echo "LTE MBMS RFSIM seems OK"
else
echo "LTE MBMS RFSIM seems to FAIL"
STATUS=-1
fi
if [ $STATUS -eq 0 ]
then
echo "LTE RFSIM seems OK"
echo "LTE: TEST_OK" > $ARCHIVES_LOC/test_final_status.log
echo "LTE RFSIM seems to FAIL"
echo "LTE: TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
CN_CONFIG="noS1"
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
S1_NOS1_CFG=0
PRB=106
FREQUENCY=3510
local try_cnt="0"
NR_STATUS=0
######### start of loop
while [ $try_cnt -lt 5 ]
do
SYNC_STATUS=0
PING_STATUS=0
IPERF_STATUS=0
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb.log
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue.log
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
if [ $NR_UE_SYNC -eq 0 ]
then
echo "Problem w/ gNB and NR-UE not syncing"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
SYNC_STATUS=-1
try_cnt=$[$try_cnt+1]
continue
fi
echo "############################################################"
echo "${CN_CONFIG} : Pinging the gNB from NR-UE"
echo "############################################################"
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log
ping_epc_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "${CN_CONFIG} : Pinging the NR-UE from gNB"
echo "############################################################"
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
ping_enb_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- NR-UE is server and gNB is client"
echo "############################################################"
THROUGHPUT="30K"
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_dl
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
generic_iperf $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
if [ $IPERF_STATUS -ne 0 ]
then
echo "DL test not OK"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
try_cnt=$[$try_cnt+1]
continue
fi
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- gNB is server and NR-UE is client"
echo "############################################################"
THROUGHPUT="30K"
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_ul
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
generic_iperf $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
if [ $IPERF_STATUS -ne 0 ]
then
echo "UL test not OK"
try_cnt=$[$try_cnt+1]
else
try_cnt=$[$try_cnt+10]
fi
done
######### end of loop
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $NR_STATUS -eq 0 ]
echo "5G-NR RFSIM seems OK"
echo "5G-NR: TEST_OK" >> $ARCHIVES_LOC/test_final_status.log
echo "5G-NR RFSIM seems to FAIL"
echo "5G-NR: TEST_KO" >> $ARCHIVES_LOC/test_final_status.log
STATUS=-1
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-l2-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Building UE elsewhere in VM
#build_ue_on_separate_folder $VM_CMDS $VM_IP_ADDR
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# adding 16 users to EPC subscriber lists
add_user_to_epc_lists $EPC_VM_CMDS $EPC_VM_IP_ADDR 16
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
EPC_CONFIGS=("wS1" "noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
NB_USERS=(01 04)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo "############################################################"
echo "Start EPC for the wS1 configuration"
echo "############################################################"
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
S1_NOS1_CFG=1
else
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "############################################################"
echo "Running now in a no-S1 configuration"
echo "############################################################"
S1_NOS1_CFG=0
fi
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
for UES in ${NB_USERS[@]}
do
INT_NB_UES=`echo $UES | sed -e "s#^0*##"`
echo "############################################################"
echo "${CN_CONFIG} : Adding ${INT_NB_UES} UE(s) to conf file and recompile"
echo "############################################################"
add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $INT_NB_UES
echo "############################################################"
echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_enb.log
start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the UE for ${INT_NB_UES} user(s)"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ue.log
start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf $INT_NB_UES $S1_NOS1_CFG
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
STATUS=-1
Raphael Defosseux
committed
continue
if [ $S1_NOS1_CFG -eq 1 ]
then
echo "############################################################"
echo "${CN_CONFIG} : Pinging the EPC from UE(s)"
echo "############################################################"
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_epc_seq_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE ${j} 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_epc_para_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE ${j} 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_epc_para_from_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/$PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
else
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : Pinging the eNB from UE(s)"
echo "############################################################"
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_seq_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE ${j} 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_para_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE ${j} 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_para_from_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/$PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE(s) from EPC"
echo "############################################################"
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_epc_seq_ue${j}.log
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_epc_para_ue${j}.log
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_epc_para_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
else
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE(s) from eNB"
echo "############################################################"
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_seq_ue${j}.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_para_ue${j}.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_para_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/$PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
if [ $S1_NOS1_CFG -eq 0 ]
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
then
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_seq_ue${j}
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
THROUGHPUT=3
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_para_ue${j}
THROUGHPUT=1
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 1
j=$[$j+1]
done
sleep 35
echo "killall --signal SIGKILL iperf"
echo "killall --signal SIGKILL iperf" > $UE_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR < $UE_VM_CMDS
rm $UE_VM_CMDS
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_para_ue${j}
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/${IPERF_LOG_FILE}_client.txt | grep -v datagram
#check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
j=$[$j+1]
done
fi
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- eNB is server and UE is client"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_seq_ue${j}
THROUGHPUT=2
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_para_ue${j}
THROUGHPUT=1
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 1
j=$[$j+1]
done
sleep 35
echo "killall --signal SIGKILL iperf"
echo "killall --signal SIGKILL iperf" > $UE_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR < $UE_VM_CMDS
rm $UE_VM_CMDS
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_para_ue${j}
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/${IPERF_LOG_FILE}_client.txt | grep -v datagram
#check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
fi
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
done
done
done
done
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi