Newer
Older
done
rm $1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "RF-SIM eNB oaitun_enb1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM eNB oaitun_enb1 is UP and CONFIGURED"
fi
fi
sleep 10
}
function start_rf_sim_ue {
local LOC_UE_VM_IP_ADDR=$2
local LOC_ENB_VM_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_PRB=$5
local LOC_FREQUENCY=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
echo "echo \"sudo apt-get --yes --quiet install daemon \"" > $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"export RFSIMULATOR=${LOC_ENB_VM_IP_ADDR}\"" >> $1
echo "export RFSIMULATOR=${LOC_ENB_VM_IP_ADDR}" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --noS1\" > ./my-lte-softmodem-run.sh " >> $1
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"got sync\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "RF-SIM UE is NOT sync'ed w/ eNB"
return
else
echo "RF-SIM UE is sync'ed w/ eNB"
fi
# Checking oaitun_ue1 interface has now an IP address
echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "RF-SIM UE oaitun_ue1 is DOWN or NOT CONFIGURED"
echo "RF-SIM UE oaitun_ue1 is UP and CONFIGURED"
function run_test_on_vm {
echo "############################################################"
echo "OAI CI VM script"
echo "############################################################"
if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) || (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
ENB_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#enb-ethernet#" -e "s#rf-sim#enb-ethernet#"`
ENB_VM_CMDS=${ENB_VM_NAME}_cmds.txt
echo "ENB_VM_NAME = $ENB_VM_NAME"
echo "ENB_VM_CMD_FILE = $ENB_VM_CMDS"
UE_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#ue-ethernet#" -e "s#rf-sim#ue-ethernet#"`
UE_VM_CMDS=${UE_VM_NAME}_cmds.txt
echo "UE_VM_NAME = $UE_VM_NAME"
echo "UE_VM_CMD_FILE = $UE_VM_CMDS"
else
echo "VM_NAME = $VM_NAME"
echo "VM_CMD_FILE = $VM_CMDS"
fi
echo "JENKINS_WKSP = $JENKINS_WKSP"
echo "ARCHIVES_LOC = $ARCHIVES_LOC"
if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) || (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
then
echo "############################################################"
echo "Waiting for ENB VM to be started"
echo "############################################################"
uvt-kvm wait $ENB_VM_NAME --insecure
ENB_VM_IP_ADDR=`uvt-kvm ip $ENB_VM_NAME`
echo "$ENB_VM_NAME has for IP addr = $ENB_VM_IP_ADDR"
echo "############################################################"
echo "Waiting for UE VM to be started"
echo "############################################################"
uvt-kvm wait $UE_VM_NAME --insecure
UE_VM_IP_ADDR=`uvt-kvm ip $UE_VM_NAME`
echo "$UE_VM_NAME has for IP addr = $UE_VM_IP_ADDR"
else
echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
fi
if [ "$RUN_OPTIONS" == "none" ]
echo "No run on VM testing for this variant currently"
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
echo "############################################################"
echo "Running test script on VM ($VM_NAME)"
echo "############################################################"
echo "echo \"sudo apt-get --yes --quiet install bc \"" > $VM_CMDS
echo "sudo apt-get update > bc-install.txt 2>&1" >> $VM_CMDS
echo "sudo apt-get --yes install bc >> bc-install.txt 2>&1" >> $VM_CMDS
echo "cd tmp" >> $VM_CMDS
echo "echo \"source oaienv\"" >> $VM_CMDS
echo "source oaienv" >> $VM_CMDS
echo "echo \"cd cmake_targets/autotests\"" >> $VM_CMDS
echo "cd cmake_targets/autotests" >> $VM_CMDS
echo "echo \"rm -Rf log\"" >> $VM_CMDS
echo "rm -Rf log" >> $VM_CMDS
echo "$RUN_OPTIONS" | sed -e 's@"@\\"@g' -e 's@^@echo "@' -e 's@$@"@' >> $VM_CMDS
echo "$RUN_OPTIONS" >> $VM_CMDS
echo "cp /home/ubuntu/bc-install.txt log" >> $VM_CMDS
echo "cd log" >> $VM_CMDS
echo "zip -r -qq tmp.zip *.* 0*" >> $VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
echo "############################################################"
echo "Creating a tmp folder to store results and artifacts"
echo "############################################################"
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/autotests/log/tmp.zip $ARCHIVES_LOC
pushd $ARCHIVES_LOC
unzip -qq -DD tmp.zip
rm tmp.zip
if [ -f results_autotests.xml ]
then
FUNCTION=`echo $VM_NAME | sed -e "s@$VM_TEMPLATE@@"`
NEW_NAME=`echo "results_autotests.xml" | sed -e "s@results_autotests@results_autotests-$FUNCTION@"`
echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $NEW_NAME
echo "<?xml-stylesheet type=\"text/xsl\" href=\"$FUNCTION.xsl\" ?>" >> $NEW_NAME
cat results_autotests.xml >> $NEW_NAME
sed -e "s@TEMPLATE@$FUNCTION@" $JENKINS_WKSP/ci-scripts/template.xsl > $FUNCTION.xsl
#mv results_autotests.xml $NEW_NAME
rm results_autotests.xml
fi
popd
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VM"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
echo "############################################################"
echo "Checking run status"
echo "############################################################"
LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
NB_FOUND_FILES=0
NB_RUNS=0
NB_FAILURES=0
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
for FULLFILE in $LOG_FILES
do
TESTSUITES=`egrep "testsuite errors" $FULLFILE`
for TESTSUITE in $TESTSUITES
do
if [[ "$TESTSUITE" == *"tests="* ]]
then
RUNS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_RUNS=$((NB_RUNS + RUNS))
fi
if [[ "$TESTSUITE" == *"failures="* ]]
then
FAILS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_FAILURES=$((NB_FAILURES + FAILS))
fi
done
NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
done
echo "NB_FOUND_FILES = $NB_FOUND_FILES"
echo "NB_RUNS = $NB_RUNS"
echo "NB_FAILURES = $NB_FAILURES"
if [ $NB_FOUND_FILES -eq 0 ]; then STATUS=-1; fi
if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# Starting EPC
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
TRANS_MODES=("fdd" "tdd")
BW_CASES=(05 10 20)
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
# Not Running in TDD-10MHz and TDD-20MHz : too unstable
#if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*10.* ]]; then continue; fi
#if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then continue; fi
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
if [[ $BW =~ .*05.* ]]; then PRB=25; fi
if [[ $BW =~ .*10.* ]]; then PRB=50; fi
if [[ $BW =~ .*20.* ]]; then PRB=100; fi
if [[ $TMODE =~ .*fdd.* ]]; then FREQUENCY=2680; else FREQUENCY=2350; fi
echo "############################################################"
echo "Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE $PRB lte-${TMODE}-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
full_basic_sim_destroy
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR 1
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
# Not more testing in any TDD : too unstable
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*05.* ]]; then full_terminate; continue; fi
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*10.* ]]; then full_terminate; continue; fi
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then full_terminate; continue; fi
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
if [[ $TMODE =~ .*fdd.* ]]
then
if [[ $BW =~ .*20.* ]]; then THROUGHPUT=12; else THROUGHPUT=10; fi
else
THROUGHPUT=6
fi
CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_dl
generic_iperf $VM_CMDS $VM_IP_ADDR $UE_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 0 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
# Not more testing in FDD-20MHz : too unstable
if [[ $TMODE =~ .*fdd.* ]] && [[ $BW =~ .*20.* ]]; then full_terminate; continue; fi
echo "############################################################"
echo "Iperf UL"
echo "############################################################"
THROUGHPUT=2
CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_ul
generic_iperf $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $VM_CMDS $VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 0 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
full_terminate
done
done
if [ -d $JENKINS_WKSP/flexran ]
then
echo "############################################################"
echo "Flexran testing is possible"
echo "############################################################"
local j="0"
while [ $j -lt 20 ]
do
if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
then
echo "Found an proper flexran controller vm build"
j="100"
else
j=$[$j+1]
sleep 30
fi
done
if [ $j -lt 50 ]
then
echo "ERROR: compiling flexran controller on vm went wrong"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
FLEXRAN_CTL_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#flexran-rtc#"`
FLEXRAN_CTL_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#flexran-rtc-cmds#"`
IS_FLEXRAN_VM_ALIVE=`uvt-kvm list | grep -c $FLEXRAN_CTL_VM_NAME`
if [ $IS_FLEXRAN_VM_ALIVE -eq 0 ]
then
echo "ERROR: Flexran Ctl VM is not alive"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
full_basic_sim_destroy
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
fi
uvt-kvm wait $FLEXRAN_CTL_VM_NAME --insecure
FLEXRAN_CTL_VM_IP_ADDR=`uvt-kvm ip $FLEXRAN_CTL_VM_NAME`
echo "$FLEXRAN_CTL_VM_NAME has for IP addr = $FLEXRAN_CTL_VM_IP_ADDR"
echo "FLEXRAN_CTL_VM_CMDS = $FLEXRAN_CTL_VM_CMDS"
echo "############################################################"
echo "Starting the FLEXRAN CONTROLLER"
echo "############################################################"
start_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 01_no_enb_connected
echo "############################################################"
echo "Starting the eNB in FDD-5MHz mode with Flexran ON"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_05fMHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 02_enb_connected
echo "############################################################"
echo "Starting the UE in FDD-5MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_05fMHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 03_enb_ue_connected
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR 1
sleep 30
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
echo "############################################################"
echo "Stopping the FLEXRAN CONTROLLER"
echo "############################################################"
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$FLEXRAN_CTL_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/flexran_ctl_*.log $ARCHIVES_LOC
fi
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
full_basic_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#rf-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# withS1 configuration is not working
#EPC_CONFIGS=("wS1" "noS1")
#TRANS_MODES=("fdd" "tdd")
#BW_CASES=(05 10 20)
EPC_CONFIGS=("noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo "############################################################"
echo "Start EPC for the wS1 configuration"
echo "############################################################"
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
S1_NOS1_CFG=1
else
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
echo "############################################################"
echo "Running now in a no-S1 configuration"
echo "############################################################"
S1_NOS1_CFG=0
fi
for TMODE in ${TRANS_MODES[@]}
do
if [[ $TMODE =~ .*fdd.* ]]
then
CONF_FILE=enb.band7.tm1.50PRB.usrpb210.conf
FREQUENCY=2680
else
CONF_FILE=enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf
FREQUENCY=2350
fi
for BW in ${BW_CASES[@]}
do
if [[ $BW =~ .*05.* ]]; then PRB=25; fi
if [[ $BW =~ .*10.* ]]; then PRB=50; fi
if [[ $BW =~ .*20.* ]]; then PRB=100; fi
echo "############################################################"
echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_enb.log
start_rf_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the UE"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ue.log
start_rf_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
if [ $S1_NOS1_CFG -eq 1 ]
then
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
if [ $S1_NOS1_CFG -eq 1 ]
then
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
echo "############################################################"
echo "${CN_CONFIG} : Pinging the EPC from UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_epc.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : Pinging the eNB from UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_enb_from_ue.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE from EPC"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_ue.log
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE from eNB"
echo "############################################################"
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_from_enb_ue.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
fi
if [ $S1_NOS1_CFG -eq 0 ]
then
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
THROUGHPUT=4
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- eNB is server and UE is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul
THROUGHPUT=2
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
done
done
done
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-l2-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Building UE elsewhere in VM
#build_ue_on_separate_folder $VM_CMDS $VM_IP_ADDR
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# adding 16 users to EPC subscriber lists
add_user_to_epc_lists $EPC_VM_CMDS $EPC_VM_IP_ADDR 16
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
EPC_CONFIGS=("wS1" "noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
NB_USERS=(01 04)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo "############################################################"
echo "Start EPC for the wS1 configuration"
echo "############################################################"
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
S1_NOS1_CFG=1
else
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "############################################################"
echo "Running now in a no-S1 configuration"
echo "############################################################"
S1_NOS1_CFG=0
fi
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
for UES in ${NB_USERS[@]}
do
INT_NB_UES=`echo $UES | sed -e "s#^0*##"`
echo "############################################################"
echo "${CN_CONFIG} : Adding ${INT_NB_UES} UE(s) to conf file and recompile"
echo "############################################################"
add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $INT_NB_UES
echo "############################################################"
echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_enb.log
start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the UE for ${INT_NB_UES} user(s)"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ue.log
start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf $INT_NB_UES $S1_NOS1_CFG
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
if [ $S1_NOS1_CFG -eq 1 ]
then
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
full_l2_sim_destroy
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
echo "############################################################"
echo "${CN_CONFIG} : Pinging the EPC from UE(s)"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_epc.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : Pinging the eNB from UE(s)"
echo "############################################################"
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_seq_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE ${j} 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_para_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE ${j} 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_para_from_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/$PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE(s) from EPC"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_ue.log
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE(s) from eNB"
echo "############################################################"
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_seq_ue${j}.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_para_ue${j}.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_para_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/$PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
if [ $S1_NOS1_CFG -eq 0 ]
then
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_seq_ue${j}
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
THROUGHPUT=3
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_para_ue${j}
THROUGHPUT=1
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 1
j=$[$j+1]
done
sleep 35
echo "killall --signal SIGKILL iperf"
echo "killall --signal SIGKILL iperf" > $UE_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR < $UE_VM_CMDS
rm $UE_VM_CMDS
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_para_ue${j}
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/${IPERF_LOG_FILE}_client.txt | grep -v datagram
#check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
j=$[$j+1]
done
fi
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- eNB is server and UE is client"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_seq_ue${j}
THROUGHPUT=2
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_para_ue${j}
THROUGHPUT=1
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 1
j=$[$j+1]
done
sleep 35
echo "killall --signal SIGKILL iperf"
echo "killall --signal SIGKILL iperf" > $UE_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR < $UE_VM_CMDS
rm $UE_VM_CMDS
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_para_ue${j}
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/${IPERF_LOG_FILE}_client.txt | grep -v datagram
#check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
fi
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
done
done
done
done
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi