Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
#
# Required Python Version
# Python 3.x
#
# Required Python Package
# pexpect
#---------------------------------------------------------------------
#-----------------------------------------------------------
# Import Libs
#-----------------------------------------------------------
import sys # arg
import re # reg
import pexpect # pexpect
import time # sleep
import os
import subprocess
import xml.etree.ElementTree as ET
import logging
import datetime
import signal
from multiprocessing import Process, Lock, SimpleQueue
logging.basicConfig(
level=logging.DEBUG,
format="[%(asctime)s] %(name)s:%(levelname)s: %(message)s"
)
#import our libs
import helpreadme as HELP
import constants as CONST
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
#-----------------------------------------------------------
# OaiCiTest Class Definition
#-----------------------------------------------------------
class OaiCiTest():
def __init__(self):
self.ranRepository = ''
self.ranBranch = ''
self.ranCommitID = ''
self.ranAllowMerge = False
self.ranTargetBranch = ''
self.FailReportCnt = 0
self.ADBIPAddress = ''
self.ADBUserName = ''
self.ADBPassword = ''
self.ADBCentralized = True
self.testCase_id = ''
self.testXMLfiles = []
self.desc = ''
self.ping_args = ''
self.ping_packetloss_threshold = ''
self.iperf_args = ''
self.iperf_packetloss_threshold = ''
self.iperf_profile = ''
self.iperf_options = ''
self.nbMaxUEtoAttach = -1
self.UEDevices = []
self.UEDevicesStatus = []
self.UEDevicesRemoteServer = []
self.UEDevicesRemoteUser = []
self.UEDevicesOffCmd = []
self.UEDevicesOnCmd = []
self.UEDevicesRebootCmd = []
self.CatMDevices = []
self.UEIPAddresses = []
self.idle_sleep_time = 0
self.x2_ho_options = 'network'
self.x2NbENBs = 0
self.x2ENBBsIds = []
self.x2ENBConnectedUEs = []
self.repeatCounts = []
self.finalStatus = False
self.UEIPAddress = ''
self.UEUserName = ''
self.UEPassword = ''
self.UE_instance = 0
self.UESourceCodePath = ''
self.UELogFile = ''
self.Build_OAI_UE_args = ''
self.Initialize_OAI_UE_args = ''
self.clean_repository = True
self.air_interface=''
self.expectedNbOfConnectedUEs = 0
def BuildOAIUE(self,HTML):
if self.UEIPAddress == '' or self.ranRepository == '' or self.ranBranch == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
SSH.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
result = re.search('--nrUE', self.Build_OAI_UE_args)
if result is not None:
self.air_interface='nr-uesoftmodem'
ue_prefix = 'NR '
else:
self.air_interface='lte-uesoftmodem'
ue_prefix = ''
result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
if result is not None:
full_ran_repo_name = self.ranRepository
else:
full_ran_repo_name = self.ranRepository + '.git'
SSH.command('mkdir -p ' + self.UESourceCodePath, '\$', 5)
SSH.command('cd ' + self.UESourceCodePath, '\$', 5)
SSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600)
# here add a check if git clone or git fetch went smoothly
SSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
SSH.command('git config user.name "OAI Jenkins"', '\$', 5)
if self.clean_repository:
SSH.command('ls *.txt', '\$', 5)
result = re.search('LAST_BUILD_INFO', SSH.getBefore())
if result is not None:
mismatch = False
SSH.command('grep SRC_COMMIT LAST_BUILD_INFO.txt', '\$', 2)
result = re.search(self.ranCommitID, SSH.getBefore())
if result is None:
mismatch = True
SSH.command('grep MERGED_W_TGT_BRANCH LAST_BUILD_INFO.txt', '\$', 2)
if self.ranAllowMerge:
result = re.search('YES', SSH.getBefore())
if result is None:
mismatch = True
SSH.command('grep TGT_BRANCH LAST_BUILD_INFO.txt', '\$', 2)
if self.ranTargetBranch == '':
result = re.search('develop', SSH.getBefore())
else:
result = re.search(self.ranTargetBranch, SSH.getBefore())
if result is None:
mismatch = True
else:
result = re.search('NO', SSH.getBefore())
if result is None:
mismatch = True
if not mismatch:
SSH.close()
HTML.CreateHtmlTestRow(self.Build_OAI_UE_args, 'OK', CONST.ALL_PROCESSES_OK)
return
SSH.command('echo ' + self.UEPassword + ' | sudo -S git clean -x -d -ff', '\$', 30)
# if the commit ID is provided use it to point to it
if self.ranCommitID != '':
SSH.command('git checkout -f ' + self.ranCommitID, '\$', 5)
# if the branch is not develop, then it is a merge request and we need to do
# the potential merge. Note that merge conflicts should already been checked earlier
if self.ranAllowMerge:
if self.ranTargetBranch == '':
if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
SSH.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
else:
logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
SSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
SSH.command('source oaienv', '\$', 5)
SSH.command('cd cmake_targets', '\$', 5)
SSH.command('mkdir -p log', '\$', 5)
SSH.command('chmod 777 log', '\$', 5)
# no need to remove in log (git clean did the trick)
SSH.command('stdbuf -o0 ./build_oai ' + self.Build_OAI_UE_args + ' 2>&1 | stdbuf -o0 tee compile_oai_ue.log', 'Bypassing the Tests|build have failed', 900)
SSH.command('ls ran_build/build', '\$', 3)
SSH.command('ls ran_build/build', '\$', 3)
buildStatus = True
result = re.search(self.air_interface, SSH.getBefore())
if result is None:
buildStatus = False
SSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
SSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
SSH.command('mv compile_oai_ue.log ' + 'build_log_' + self.testCase_id, '\$', 5)
if buildStatus:
# Generating a BUILD INFO file
SSH.command('echo "SRC_BRANCH: ' + self.ranBranch + '" > ../LAST_BUILD_INFO.txt', '\$', 2)
SSH.command('echo "SRC_COMMIT: ' + self.ranCommitID + '" >> ../LAST_BUILD_INFO.txt', '\$', 2)
if self.ranAllowMerge:
SSH.command('echo "MERGED_W_TGT_BRANCH: YES" >> ../LAST_BUILD_INFO.txt', '\$', 2)
if self.ranTargetBranch == '':
SSH.command('echo "TGT_BRANCH: develop" >> ../LAST_BUILD_INFO.txt', '\$', 2)
else:
SSH.command('echo "TGT_BRANCH: ' + self.ranTargetBranch + '" >> ../LAST_BUILD_INFO.txt', '\$', 2)
else:
SSH.command('echo "MERGED_W_TGT_BRANCH: NO" >> ../LAST_BUILD_INFO.txt', '\$', 2)
SSH.close()
HTML.CreateHtmlTestRow(self.Build_OAI_UE_args, 'OK', CONST.ALL_PROCESSES_OK, 'OAI UE')
else:
SSH.close()
logging.error('\u001B[1m Building OAI UE Failed\u001B[0m')
HTML.CreateHtmlTestRow(self.Build_OAI_UE_args, 'KO', CONST.ALL_PROCESSES_OK, 'OAI UE')
HTML.CreateHtmlTabFooter(False)
sys.exit(1)
def CheckFlexranCtrlInstallation(self,RAN,EPC):
if EPC.IPAddress == '' or EPC.UserName == '' or EPC.Password == '':
return
SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password)
SSH.command('ls -ls /opt/flexran_rtc/*/rt_controller', '\$', 5)
result = re.search('/opt/flexran_rtc/build/rt_controller', SSH.getBefore())
if result is not None:
RAN.flexranCtrlInstalled=True
logging.debug('Flexran Controller is installed')
SSH.close()
def InitializeFlexranCtrl(self, HTML,RAN,EPC):
if RAN.flexranCtrlInstalled == False:
return
if EPC.IPAddress == '' or EPC.UserName == '' or EPC.Password == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password)
SSH.command('cd /opt/flexran_rtc', '\$', 5)
SSH.command('echo ' + EPC.Password + ' | sudo -S rm -f log/*.log', '\$', 5)
SSH.command('echo ' + EPC.Password + ' | sudo -S echo "build/rt_controller -c log_config/basic_log" > ./my-flexran-ctl.sh', '\$', 5)
SSH.command('echo ' + EPC.Password + ' | sudo -S chmod 755 ./my-flexran-ctl.sh', '\$', 5)
SSH.command('echo ' + EPC.Password + ' | sudo -S daemon --unsafe --name=flexran_rtc_daemon --chdir=/opt/flexran_rtc -o /opt/flexran_rtc/log/flexranctl_' + self.testCase_id + '.log ././my-flexran-ctl.sh', '\$', 5)
SSH.command('ps -aux | grep --color=never rt_controller', '\$', 5)
result = re.search('rt_controller -c ', SSH.getBefore())
if result is not None:
logging.debug('\u001B[1m Initialize FlexRan Controller Completed\u001B[0m')
RAN.flexranCtrlStarted=True
SSH.close()
HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
def InitializeUE_common(self, device_id, idx,COTS_UE):
try:
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
if not self.ADBCentralized:
# Reboot UE
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesRebootCmd[idx], '\$', 60)
# Wait
#time.sleep(60)
# Put in LTE-Mode only
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "settings put global preferred_network_mode 11"\'', '\$', 60)
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "settings put global preferred_network_mode1 11"\'', '\$', 60)
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "settings put global preferred_network_mode2 11"\'', '\$', 60)
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "settings put global preferred_network_mode3 11"\'', '\$', 60)
# enable data service
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "svc data enable"\'', '\$', 60)
# we need to do radio on/off cycle to make sure of above changes
# airplane mode off // radio on
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesOnCmd[idx], '\$', 60)
#time.sleep(10)
# airplane mode on // radio off
#SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesOffCmd[idx], '\$', 60)
# normal procedure without reboot
# enable data service
SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "svc data enable"\'', '\$', 60)
# airplane mode on // radio off
SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesOffCmd[idx], '\$', 60)
SSH.close()
return
#RH quick add-on to integrate cots control defined by yaml
#if device_id exists in yaml dictionary, we execute the new procedure defined in cots_ue class
#otherwise we use the legacy procedure
if COTS_UE.Check_Exists(device_id):
#switch device to Airplane mode ON (ie Radio OFF)
COTS_UE.Set_Airplane(device_id, 'ON')
else:
# enable data service
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell "svc data enable"', '\$', 60)
# The following commands are deprecated since we no longer work on Android 7+
# SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell settings put global airplane_mode_on 1', '\$', 10)
# SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true', '\$', 60)
# a dedicated script has to be installed inside the UE
# airplane mode on means call /data/local/tmp/off
if device_id == '84B7N16418004022':
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/off"', '\$', 60)
else:
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
#airplane mode off means call /data/local/tmp/on
logging.debug('\u001B[1mUE (' + device_id + ') Initialize Completed\u001B[0m')
SSH.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def InitializeUE(self,HTML,COTS_UE):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
multi_jobs = []
i = 0
for device_id in self.UEDevices:
p = Process(target = self.InitializeUE_common, args = (device_id,i,COTS_UE,))
def InitializeOAIUE(self,HTML,RAN,EPC,COTS_UE):
if self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
if self.air_interface == 'lte-uesoftmodem':
result = re.search('--no-L2-connect', str(self.Initialize_OAI_UE_args))
if result is None:
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE,RAN,EPC)
if (pStatus < 0):
HTML.CreateHtmlTestRow(self.air_interface + ' ' + self.Initialize_OAI_UE_args, 'KO', pStatus)
HTML.CreateHtmlTabFooter(False)
sys.exit(1)
UE_prefix = ''
else:
UE_prefix = 'NR '
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
SSH.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
# b2xx_fx3_utils reset procedure
SSH.command('echo ' + self.UEPassword + ' | sudo -S uhd_find_devices', '\$', 60)
result = re.search('type: b200', SSH.getBefore())
if result is not None:
logging.debug('Found a B2xx device --> resetting it')
SSH.command('echo ' + self.UEPassword + ' | sudo -S b2xx_fx3_utils --reset-device', '\$', 10)
# Reloading FGPA bin firmware
SSH.command('echo ' + self.UEPassword + ' | sudo -S uhd_find_devices', '\$', 60)
result = re.search('type: n3xx', str(SSH.getBefore()))
if result is not None:
logging.debug('Found a N3xx device --> resetting it')
SSH.command('cd ' + self.UESourceCodePath, '\$', 5)
# Initialize_OAI_UE_args usually start with -C and followed by the location in repository
SSH.command('source oaienv', '\$', 5)
SSH.command('cd cmake_targets/ran_build/build', '\$', 5)
if self.air_interface == 'lte-uesoftmodem':
result = re.search('--no-L2-connect', str(self.Initialize_OAI_UE_args))
# We may have to regenerate the .u* files
if result is None:
SSH.command('ls /tmp/*.sed', '\$', 5)
result = re.search('adapt_usim_parameters', SSH.getBefore())
if result is not None:
SSH.command('sed -f /tmp/adapt_usim_parameters.sed ../../../openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf > ../../../openair3/NAS/TOOLS/ci-ue_eurecom_test_sfr.conf', '\$', 5)
else:
SSH.command('sed -e "s#93#92#" -e "s#8baf473f2f8fd09487cccbd7097c6862#fec86ba6eb707ed08905757b1bb44b8f#" -e "s#e734f8734007d6c5ce7a0508809e7e9c#C42449363BBAD02B66D16BC975D77CC1#" ../../../openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf > ../../../openair3/NAS/TOOLS/ci-ue_eurecom_test_sfr.conf', '\$', 5)
SSH.command('echo ' + self.UEPassword + ' | sudo -S rm -Rf .u*', '\$', 5)
SSH.command('echo ' + self.UEPassword + ' | sudo -S ../../../targets/bin/conf2uedata -c ../../../openair3/NAS/TOOLS/ci-ue_eurecom_test_sfr.conf -o .', '\$', 5)
else:
SSH.command('if [ -e rbconfig.raw ]; then echo ' + self.UEPassword + ' | sudo -S rm rbconfig.raw; fi', '\$', 5)
SSH.command('if [ -e reconfig.raw ]; then echo ' + self.UEPassword + ' | sudo -S rm reconfig.raw; fi', '\$', 5)
# Copy the RAW files from gNB running directory (maybe on another machine)
copyin_res = SSH.copyin(RAN.eNBIPAddress, RAN.eNBUserName, RAN.eNBPassword, RAN.eNBSourceCodePath + '/cmake_targets/rbconfig.raw', '.')
if (copyin_res == 0):
SSH.copyout(self.UEIPAddress, self.UEUserName, self.UEPassword, './rbconfig.raw', self.UESourceCodePath + '/cmake_targets/ran_build/build')
copyin_res = SSH.copyin(RAN.eNBIPAddress, RAN.eNBUserName, RAN.eNBPassword, RAN.eNBSourceCodePath + '/cmake_targets/reconfig.raw', '.')
if (copyin_res == 0):
SSH.copyout(self.UEIPAddress, self.UEUserName, self.UEPassword, './reconfig.raw', self.UESourceCodePath + '/cmake_targets/ran_build/build')
SSH.command('echo "ulimit -c unlimited && ./'+ self.air_interface +' ' + self.Initialize_OAI_UE_args + '" > ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
SSH.command('chmod 775 ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
SSH.command('echo ' + self.UEPassword + ' | sudo -S rm -Rf ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '.log', '\$', 5)
self.UELogFile = 'ue_' + self.testCase_id + '.log'
# We are now looping several times to hope we really sync w/ an eNB
doOutterLoop = True
outterLoopCounter = 5
gotSyncStatus = True
fullSyncStatus = True
while (doOutterLoop):
SSH.command('cd ' + self.UESourceCodePath + '/cmake_targets/ran_build/build', '\$', 5)
SSH.command('echo ' + self.UEPassword + ' | sudo -S rm -Rf ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '.log', '\$', 5)
SSH.command('echo $USER; nohup sudo -E ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh' + ' > ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '.log ' + ' 2>&1 &', self.UEUserName, 5)
time.sleep(6)
SSH.command('cd ../..', '\$', 5)
doLoop = True
loopCounter = 10
gotSyncStatus = True
# the 'got sync' message is for the UE threads synchronization
while (doLoop):
loopCounter = loopCounter - 1
if (loopCounter == 0):
# Here should never occur
logging.error('"got sync" message never showed!')
gotSyncStatus = False
doLoop = False
continue
SSH.command('stdbuf -o0 cat ue_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync"', '\$', 4)
if self.air_interface == 'nr-uesoftmodem':
result = re.search('Starting sync detection', SSH.getBefore())
else:
result = re.search('got sync', SSH.getBefore())
if result is None:
time.sleep(10)
else:
doLoop = False
logging.debug('Found "got sync" message!')
if gotSyncStatus == False:
# we certainly need to stop the lte-uesoftmodem process if it is still running!
SSH.command('ps -aux | grep --text --color=never softmodem | grep -v grep', '\$', 4)
result = re.search('-uesoftmodem', SSH.getBefore())
if result is not None:
SSH.command('echo ' + self.UEPassword + ' | sudo -S killall --signal=SIGINT -r *-uesoftmodem', '\$', 4)
time.sleep(3)
outterLoopCounter = outterLoopCounter - 1
if (outterLoopCounter == 0):
doOutterLoop = False
continue
# We are now checking if sync w/ eNB DOES NOT OCCUR
# Usually during the cell synchronization stage, the UE returns with No cell synchronization message
# That is the case for LTE
# In NR case, it's a positive message that will show if synchronization occurs
doLoop = True
if self.air_interface == 'nr-uesoftmodem':
loopCounter = 10
else:
# We are now checking if sync w/ eNB DOES NOT OCCUR
# Usually during the cell synchronization stage, the UE returns with No cell synchronization message
loopCounter = 10
while (doLoop):
loopCounter = loopCounter - 1
if (loopCounter == 0):
if self.air_interface == 'nr-uesoftmodem':
# Here we do have great chances that UE did NOT cell-sync w/ gNB
doLoop = False
fullSyncStatus = False
logging.debug('Never seen the NR-Sync message (Measured Carrier Frequency) --> try again')
time.sleep(6)
# Stopping the NR-UE
SSH.command('ps -aux | grep --text --color=never softmodem | grep -v grep', '\$', 4)
result = re.search('nr-uesoftmodem', SSH.getBefore())
if result is not None:
SSH.command('echo ' + self.UEPassword + ' | sudo -S killall --signal=SIGINT nr-uesoftmodem', '\$', 4)
time.sleep(6)
else:
# Here we do have a great chance that the UE did cell-sync w/ eNB
doLoop = False
doOutterLoop = False
fullSyncStatus = True
continue
SSH.command('stdbuf -o0 cat ue_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Frequency"', '\$', 4)
if self.air_interface == 'nr-uesoftmodem':
# Positive messaging -->
result = re.search('Measured Carrier Frequency', SSH.getBefore())
if result is not None:
doLoop = False
doOutterLoop = False
fullSyncStatus = True
else:
time.sleep(6)
else:
# Negative messaging -->
result = re.search('No cell synchronization found', SSH.getBefore())
if result is None:
time.sleep(6)
else:
doLoop = False
fullSyncStatus = False
logging.debug('Found: "No cell synchronization" message! --> try again')
time.sleep(6)
SSH.command('ps -aux | grep --text --color=never softmodem | grep -v grep', '\$', 4)
result = re.search('lte-uesoftmodem', SSH.getBefore())
if result is not None:
SSH.command('echo ' + self.UEPassword + ' | sudo -S killall --signal=SIGINT lte-uesoftmodem', '\$', 4)
outterLoopCounter = outterLoopCounter - 1
if (outterLoopCounter == 0):
doOutterLoop = False
if fullSyncStatus and gotSyncStatus:
doInterfaceCheck = False
if self.air_interface == 'lte-uesoftmodem':
result = re.search('--no-L2-connect', str(self.Initialize_OAI_UE_args))
if result is None:
doInterfaceCheck = True
# For the moment, only in explicit noS1 without kernel module (ie w/ tunnel interface)
if self.air_interface == 'nr-uesoftmodem':
result = re.search('--noS1 --nokrnmod 1', str(self.Initialize_OAI_UE_args))
if result is not None:
doInterfaceCheck = True
if doInterfaceCheck:
SSH.command('ifconfig oaitun_ue1', '\$', 4)
SSH.command('ifconfig oaitun_ue1', '\$', 4)
# ifconfig output is different between ubuntu 16 and ubuntu 18
result = re.search('inet addr:1|inet 1', SSH.getBefore())
if result is not None:
logging.debug('\u001B[1m oaitun_ue1 interface is mounted and configured\u001B[0m')
tunnelInterfaceStatus = True
else:
logging.debug(SSH.getBefore())
logging.error('\u001B[1m oaitun_ue1 interface is either NOT mounted or NOT configured\u001B[0m')
tunnelInterfaceStatus = False
if RAN.eNBmbmsEnables[0]:
SSH.command('ifconfig oaitun_uem1', '\$', 4)
result = re.search('inet addr', SSH.getBefore())
if result is not None:
logging.debug('\u001B[1m oaitun_uem1 interface is mounted and configured\u001B[0m')
tunnelInterfaceStatus = tunnelInterfaceStatus and True
else:
logging.error('\u001B[1m oaitun_uem1 interface is either NOT mounted or NOT configured\u001B[0m')
tunnelInterfaceStatus = False
else:
tunnelInterfaceStatus = True
else:
tunnelInterfaceStatus = True
SSH.close()
if fullSyncStatus and gotSyncStatus and tunnelInterfaceStatus:
HTML.CreateHtmlTestRow(self.air_interface + ' ' + self.Initialize_OAI_UE_args, 'OK', CONST.ALL_PROCESSES_OK, 'OAI UE')
logging.debug('\u001B[1m Initialize OAI UE Completed\u001B[0m')
if (self.ADBIPAddress != 'none'):
self.UEDevices = []
self.UEDevices.append('OAI-UE')
self.UEDevicesStatus = []
self.UEDevicesStatus.append(CONST.UE_STATUS_DETACHED)
else:
if self.air_interface == 'lte-uesoftmodem':
if RAN.eNBmbmsEnables[0]:
HTML.htmlUEFailureMsg='oaitun_ue1/oaitun_uem1 interfaces are either NOT mounted or NOT configured'
else:
HTML.htmlUEFailureMsg='oaitun_ue1 interface is either NOT mounted or NOT configured'
HTML.CreateHtmlTestRow(self.air_interface + ' ' + self.Initialize_OAI_UE_args, 'KO', CONST.OAI_UE_PROCESS_NO_TUNNEL_INTERFACE, 'OAI UE')
else:
HTML.htmlUEFailureMsg='nr-uesoftmodem did NOT synced'
HTML.CreateHtmlTestRow(self.air_interface + ' ' + self.Initialize_OAI_UE_args, 'KO', CONST.OAI_UE_PROCESS_COULD_NOT_SYNC, 'OAI UE')
logging.error('\033[91mInitialize OAI UE Failed! \033[0m')
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
def checkDevTTYisUnlocked(self):
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
count = 0
while count < 5:
SSH.command('echo ' + self.ADBPassword + ' | sudo -S lsof | grep ttyUSB0', '\$', 10)
result = re.search('picocom', SSH.getBefore())
if result is None:
count = 10
else:
time.sleep(5)
count = count + 1
SSH.close()
def InitializeCatM(self,HTML):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
SSH.enablePicocomClosure()
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
SSH.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
SSH.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
time.sleep(1)
# Calling twice AT to clear all buffers
SSH.command('AT', 'OK|ERROR', 5)
SSH.command('AT', 'OK', 5)
# Doing a power cycle
SSH.command('AT^RESET', 'SIMSTORE,READY', 15)
SSH.command('AT', 'OK|ERROR', 5)
SSH.command('AT', 'OK', 5)
SSH.command('ATE1', 'OK', 5)
# Disabling the Radio
SSH.command('AT+CFUN=0', 'OK', 5)
logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
# Checking if auto-attach is enabled
SSH.command('AT^AUTOATT?', 'OK', 5)
result = re.search('AUTOATT: (?P<state>[0-9\-]+)', SSH.getBefore())
if result is not None:
if result.group('state') is not None:
autoAttachState = int(result.group('state'))
if autoAttachState is not None:
if autoAttachState == 0:
SSH.command('AT^AUTOATT=1', 'OK', 5)
logging.debug('\u001B[1m Auto-Attach enabled\u001B[0m')
else:
logging.debug('\u001B[1;37;41m Could not check Auto-Attach! \u001B[0m')
# Force closure of picocom but device might still be locked
SSH.close()
SSH.disablePicocomClosure()
HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
self.checkDevTTYisUnlocked()
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
SSH.enablePicocomClosure()
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
SSH.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
SSH.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
time.sleep(1)
# Calling twice AT to clear all buffers
SSH.command('AT', 'OK|ERROR', 5)
SSH.command('AT', 'OK', 5)
# Disabling the Radio
SSH.command('AT+CFUN=0', 'OK', 5)
logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
SSH.close()
SSH.disablePicocomClosure()
HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
self.checkDevTTYisUnlocked()
def AttachCatM(self,HTML,RAN,COTS_UE):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
SSH.enablePicocomClosure()
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
SSH.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
SSH.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
time.sleep(1)
# Calling twice AT to clear all buffers
SSH.command('AT', 'OK|ERROR', 5)
SSH.command('AT', 'OK', 5)
# Enabling the Radio
SSH.command('AT+CFUN=1', 'SIMSTORE,READY', 5)
logging.debug('\u001B[1m Cellular Functionality enabled\u001B[0m')
time.sleep(4)
# We should check if we register
count = 0
attach_cnt = 0
attach_status = False
while count < 5:
SSH.command('AT+CEREG?', 'OK', 5)
result = re.search('CEREG: 2,(?P<state>[0-9\-]+),', SSH.getBefore())
if result is not None:
mDataConnectionState = int(result.group('state'))
if mDataConnectionState is not None:
if mDataConnectionState == 1:
count = 10
attach_status = True
result = re.search('CEREG: 2,1,"(?P<networky>[0-9A-Z]+)","(?P<networkz>[0-9A-Z]+)"', SSH.getBefore())
if result is not None:
networky = result.group('networky')
networkz = result.group('networkz')
logging.debug('\u001B[1m CAT-M module attached to eNB (' + str(networky) + '/' + str(networkz) + ')\u001B[0m')
else:
logging.debug('\u001B[1m CAT-M module attached to eNB\u001B[0m')
else:
logging.debug('+CEREG: 2,' + str(mDataConnectionState))
attach_cnt = attach_cnt + 1
else:
logging.debug(SSH.getBefore())
attach_cnt = attach_cnt + 1
count = count + 1
time.sleep(1)
if attach_status:
SSH.command('AT+CESQ', 'OK', 5)
result = re.search('CESQ: 99,99,255,255,(?P<rsrq>[0-9]+),(?P<rsrp>[0-9]+)', SSH.getBefore())
if result is not None:
nRSRQ = int(result.group('rsrq'))
nRSRP = int(result.group('rsrp'))
if (nRSRQ is not None) and (nRSRP is not None):
logging.debug(' RSRQ = ' + str(-20+(nRSRQ/2)) + ' dB')
logging.debug(' RSRP = ' + str(-140+nRSRP) + ' dBm')
SSH.close()
SSH.disablePicocomClosure()
html_queue = SimpleQueue()
self.checkDevTTYisUnlocked()
if attach_status:
html_cell = '<pre style="background-color:white">CAT-M module Attachment Completed in ' + str(attach_cnt+4) + ' seconds'
if (nRSRQ is not None) and (nRSRP is not None):
html_cell += '\n RSRQ = ' + str(-20+(nRSRQ/2)) + ' dB'
html_cell += '\n RSRP = ' + str(-140+nRSRP) + ' dBm</pre>'
else:
html_cell += '</pre>'
html_queue.put(html_cell)
HTML.CreateHtmlTestRowQueue('N/A', 'OK', 1, html_queue)
else:
logging.error('\u001B[1m CAT-M module Attachment Failed\u001B[0m')
html_cell = '<pre style="background-color:white">CAT-M module Attachment Failed</pre>'
html_queue.put(html_cell)
HTML.CreateHtmlTestRowQueue('N/A', 'KO', 1, html_queue)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
def PingCatM(self,HTML,RAN,EPC,COTS_UE):
if EPC.IPAddress == '' or EPC.UserName == '' or EPC.Password == '' or EPC.SourceCodePath == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE,RAN,EPC)
if (pStatus < 0):
HTML.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
return
try:
statusQueue = SimpleQueue()
lock = Lock()
SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password)
SSH.command('cd ' + EPC.SourceCodePath, '\$', 5)
SSH.command('cd scripts', '\$', 5)
if re.match('OAI', EPC.Type, re.IGNORECASE):
logging.debug('Using the OAI EPC HSS: not implemented yet')
HTML.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
HTML.CreateHtmlTabFooter(False)
sys.exit(1)
else:
SSH.command('egrep --color=never "Allocated ipv4 addr" /opt/ltebox/var/log/xGwLog.0', '\$', 5)
result = re.search('Allocated ipv4 addr: (?P<ipaddr>[0-9\.]+) from Pool', SSH.getBefore())
if result is not None:
moduleIPAddr = result.group('ipaddr')
else:
HTML.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
return
ping_time = re.findall("-c (\d+)",str(self.ping_args))
device_id = 'catm'
ping_status = SSH.command('stdbuf -o0 ping ' + self.ping_args + ' ' + str(moduleIPAddr) + ' 2>&1 | stdbuf -o0 tee ping_' + self.testCase_id + '_' + device_id + '.log', '\$', int(ping_time[0])*1.5)
# TIMEOUT CASE
if ping_status < 0:
message = 'Ping with UE (' + str(moduleIPAddr) + ') crashed due to TIMEOUT!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
SSH.close()
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', SSH.getBefore())
if result is None:
message = 'Packet Loss Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
SSH.close()
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
packetloss = result.group('packetloss')
if float(packetloss) == 100:
message = 'Packet Loss is 100%'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
SSH.close()
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', SSH.getBefore())
if result is None:
message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
SSH.close()
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
rtt_min = result.group('rtt_min')
rtt_avg = result.group('rtt_avg')
rtt_max = result.group('rtt_max')
pal_msg = 'Packet Loss : ' + packetloss + '%'
min_msg = 'RTT(Min) : ' + rtt_min + ' ms'
avg_msg = 'RTT(Avg) : ' + rtt_avg + ' ms'
max_msg = 'RTT(Max) : ' + rtt_max + ' ms'
lock.acquire()
logging.debug('\u001B[1;37;44m ping result (' + moduleIPAddr + ') \u001B[0m')
logging.debug('\u001B[1;34m ' + pal_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + min_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + avg_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + max_msg + '\u001B[0m')
qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
packetLossOK = True
if packetloss is not None:
if float(packetloss) > float(self.ping_packetloss_threshold):
qMsg += '\nPacket Loss too high'
logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
packetLossOK = False
elif float(packetloss) > 0:
qMsg += '\nPacket Loss is not 0%'
logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
lock.release()
SSH.close()
html_cell = '<pre style="background-color:white">CAT-M module\nIP Address : ' + moduleIPAddr + '\n' + qMsg + '</pre>'
statusQueue.put(html_cell)
if (packetLossOK):
HTML.CreateHtmlTestRowQueue(self.ping_args, 'OK', 1, statusQueue)
else:
HTML.CreateHtmlTestRowQueue(self.ping_args, 'KO', 1, statusQueue)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
except:
os.kill(os.getppid(),signal.SIGUSR1)
def AttachUE_common(self, device_id, statusQueue, lock, idx,COTS_UE):
try:
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
if self.ADBCentralized:
#RH quick add on to integrate cots control defined by yaml
#if device Id exists in yaml dictionary, we execute the new procedure defined in cots_ue class
#otherwise we use the legacy procedure
if COTS_UE.Check_Exists(device_id):
#switch device to Airplane mode OFF (ie Radio ON)
COTS_UE.Set_Airplane(device_id, 'OFF')
elif device_id == '84B7N16418004022':
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/on"', '\$', 60)
else:
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
else:
# airplane mode off // radio on
SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesOnCmd[idx], '\$', 60)
time.sleep(2)
max_count = 45
count = max_count
while count > 0:
if self.ADBCentralized:
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell "dumpsys telephony.registry" | grep -m 1 mDataConnectionState', '\$', 15)
else:
SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "dumpsys telephony.registry"\' | grep -m 1 mDataConnectionState', '\$', 60)
result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', SSH.getBefore())
if result is None:
logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
lock.acquire()
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put('mDataConnectionState Not Found!')
lock.release()
break
mDataConnectionState = int(result.group('state'))
if mDataConnectionState == 2:
logging.debug('\u001B[1mUE (' + device_id + ') Attach Completed\u001B[0m')
lock.acquire()
statusQueue.put(max_count - count)
statusQueue.put(device_id)
statusQueue.put('Attach Completed')
lock.release()
break
count = count - 1
if count == 15 or count == 30:
logging.debug('\u001B[1;30;43m Retry UE (' + device_id + ') Flight Mode Off \u001B[0m')
if self.ADBCentralized:
#RH quick add on to intgrate cots control defined by yaml
#if device id exists in yaml dictionary, we execute the new procedure defined in cots_ue class
#otherwise we use the legacy procedure
if COTS_UE.Check_Exists(device_id):
#switch device to Airplane mode ON (ie Radio OFF)
COTS_UE.Set_Airplane(device_id, 'ON')
elif device_id == '84B7N16418004022':
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/off"', '\$', 60)
else:
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
else:
SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesOffCmd[idx], '\$', 60)
time.sleep(0.5)
if self.ADBCentralized:
#RH quick add on to integrate cots control defined by yaml
#if device id exists in yaml dictionary, we execute the new procedre defined incots_ue class
#otherwise we use the legacy procedure
if COTS_UE.Check_Exists(device_id):
#switch device to Airplane mode OFF (ie Radio ON)
COTS_UE.Set_Airplane(device_id, 'OFF')
elif device_id == '84B7N16418004022':
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/on"', '\$', 60)
else:
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
else:
SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesOnCmd[idx], '\$', 60)
time.sleep(0.5)
logging.debug('\u001B[1mWait UE (' + device_id + ') a second until mDataConnectionState=2 (' + str(max_count-count) + ' times)\u001B[0m')
time.sleep(1)
if count == 0:
logging.debug('\u001B[1;37;41m UE (' + device_id + ') Attach Failed \u001B[0m')
lock.acquire()
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put('Attach Failed')
lock.release()
SSH.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def AttachUE(self,HTML,RAN,EPC,COTS_UE):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE,RAN,EPC)
if (pStatus < 0):
HTML.CreateHtmlTestRow('N/A', 'KO', pStatus)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
return
multi_jobs = []
status_queue = SimpleQueue()
lock = Lock()
nb_ue_to_connect = 0
for device_id in self.UEDevices:
if (self.nbMaxUEtoAttach == -1) or (nb_ue_to_connect < self.nbMaxUEtoAttach):
self.UEDevicesStatus[nb_ue_to_connect] = CONST.UE_STATUS_ATTACHING
p = Process(target = self.AttachUE_common, args = (device_id, status_queue, lock,nb_ue_to_connect,COTS_UE,))
p.daemon = True
p.start()
multi_jobs.append(p)
nb_ue_to_connect = nb_ue_to_connect + 1
for job in multi_jobs:
job.join()
if (status_queue.empty()):
HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ALL_PROCESSES_OK)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
return
else:
attach_status = True
html_queue = SimpleQueue()
while (not status_queue.empty()):
count = status_queue.get()
if (count < 0):
attach_status = False
device_id = status_queue.get()
message = status_queue.get()
if (count < 0):
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + '</pre>'
else:
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + ' in ' + str(count + 2) + ' seconds</pre>'
html_queue.put(html_cell)
if (attach_status):
cnt = 0
while cnt < len(self.UEDevices):
if self.UEDevicesStatus[cnt] == CONST.UE_STATUS_ATTACHING:
self.UEDevicesStatus[cnt] = CONST.UE_STATUS_ATTACHED
cnt += 1
HTML.CreateHtmlTestRowQueue('N/A', 'OK', len(self.UEDevices), html_queue)
result = re.search('T_stdout', str(RAN.Initialize_eNB_args))
if result is not None:
logging.debug('Waiting 5 seconds to fill up record file')
time.sleep(5)
else:
HTML.CreateHtmlTestRowQueue('N/A', 'KO', len(self.UEDevices), html_queue)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
def DetachUE_common(self, device_id, idx,COTS_UE):
try:
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
if self.ADBCentralized:
#RH quick add on to integrate cots control defined by yaml
#if device id exists in yaml dictionary, we execute the new procedure defined in cots_ue class
#otherwise we use the legacy procedure
if COTS_UE.Check_Exists(device_id):
#switch device to Airplane mode ON (ie Radio OFF)
COTS_UE.Set_Airplane(device_id,'ON')
elif device_id == '84B7N16418004022':
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/off"', '\$', 60)
else:
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
else:
SSH.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' ' + self.UEDevicesOffCmd[idx], '\$', 60)
logging.debug('\u001B[1mUE (' + device_id + ') Detach Completed\u001B[0m')
SSH.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def DetachUE(self,HTML,RAN,EPC,COTS_UE):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
HELP.GenericHelp(CONST.Version)
sys.exit('Insufficient Parameter')
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE,RAN,EPC)
if (pStatus < 0):
HTML.CreateHtmlTestRow('N/A', 'KO', pStatus)
self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE)
return
multi_jobs = []
cnt = 0
for device_id in self.UEDevices:
self.UEDevicesStatus[cnt] = CONST.UE_STATUS_DETACHING
p = Process(target = self.DetachUE_common, args = (device_id,cnt,COTS_UE,))
p.daemon = True
p.start()
multi_jobs.append(p)
cnt += 1
for job in multi_jobs:
job.join()
HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
result = re.search('T_stdout', str(RAN.Initialize_eNB_args))
if result is not None:
logging.debug('Waiting 5 seconds to fill up record file')
time.sleep(5)
cnt = 0
while cnt < len(self.UEDevices):
self.UEDevicesStatus[cnt] = CONST.UE_STATUS_DETACHED
cnt += 1
def RebootUE_common(self, device_id):
try:
SSH.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
previousmDataConnectionStates = []
# Save mDataConnectionState
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
SSH.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', SSH.getBefore())
if result is None:
logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
sys.exit(1)
previousmDataConnectionStates.append(int(result.group('state')))