Something went wrong on our end
Forked from
oai / openairinterface5G
20496 commits behind the upstream repository.
-
Raphael Defosseux authoredSigned-off-by:Raphael Defosseux <raphael.defosseux@eurecom.fr>
Raphael Defosseux authoredSigned-off-by:
runTestOnVM.sh 60.04 KiB
#!/bin/bash
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
function run_test_usage {
echo "OAI CI VM script"
echo " Original Author: Raphael Defosseux"
echo " Requirements:"
echo " -- uvtool uvtool-libvirt apt-cacher"
echo " -- xenial image already synced"
echo " Default:"
echo " -- eNB with USRP"
echo ""
echo "Usage:"
echo "------"
echo " oai-ci-vm-tool test [OPTIONS]"
echo ""
echo "Options:"
echo "--------"
echo " --job-name #### OR -jn ####"
echo " Specify the name of the Jenkins job."
echo ""
echo " --build-id #### OR -id ####"
echo " Specify the build ID of the Jenkins job."
echo ""
echo " --workspace #### OR -ws ####"
echo " Specify the workspace."
echo ""
variant_usage
echo " Specify the variant to build."
echo ""
echo " --keep-vm-alive OR -k"
echo " Keep the VM alive after the build."
echo ""
echo " --help OR -h"
echo " Print this help message."
echo ""
}
function start_basic_sim_enb {
local LOC_VM_IP_ADDR=$2
local LOC_EPC_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_NB_RBS=$5
local LOC_CONF_FILE=$6
local LOC_FLEXRAN_CTL_IP_ADRR=$7
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"export ENODEB=1\"" >> $1
echo "export ENODEB=1" >> $1
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
if [[ $LOC_FLEXRAN_CTL_IP_ADRR =~ .*none.* ]]
then
echo "sed -i -e 's#CI_FLEXRAN_CTL_IP_ADDR#127.0.0.1#' ci-$LOC_CONF_FILE" >> $1
else
echo "sed -i -e 's#FLEXRAN_ENABLED = .*no.*;#FLEXRAN_ENABLED = \"yes\";#' -e 's#CI_FLEXRAN_CTL_IP_ADDR#$LOC_FLEXRAN_CTL_IP_ADRR#' ci-$LOC_CONF_FILE" >> $1
fi
echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
sleep 10
rm $1
}
function start_basic_sim_ue {
local LOC_UE_LOG_FILE=$3
local LOC_NB_RBS=$4
local LOC_FREQUENCY=$5
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
local i="0"
echo "ifconfig oip1 | egrep -c \"inet addr\"" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
else
UE_SYNC=1
fi
}
function get_ue_ip_addr {
echo "ifconfig oip1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $1
UE_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1`
echo "UE IP Address for EPC is : $UE_IP_ADDR"
rm $1
}
function ping_ue_ip_addr {
echo "echo \"ping -c 20 $3\"" > $1
echo "echo \"COMMAND IS: ping -c 20 $3\" > $4" > $1
echo "ping -c 20 $UE_IP_ADDR | tee -a $4" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function check_ping_result {
local LOC_PING_FILE=$1
local LOC_NB_PINGS=$2
if [ -f $LOC_PING_FILE ]
then
local FILE_COMPLETE=`egrep -c "ping statistics" $LOC_PING_FILE`
if [ $FILE_COMPLETE -eq 0 ]
then
PING_STATUS=-1
else
local ALL_PACKET_RECEIVED=`egrep -c "$LOC_NB_PINGS received" $LOC_PING_FILE`
if [ $ALL_PACKET_RECEIVED -eq 1 ]
then
echo "got all ping packets"
else
PING_STATUS=-1
fi
fi
else
PING_STATUS=-1
fi
}
function iperf_dl {
local REQ_BANDWIDTH=$5
local BASE_LOG_FILE=$6
echo "echo \"iperf -u -s -i 1\"" > $1
echo "echo \"COMMAND IS: iperf -u -s -i 1\" > tmp/cmake_targets/log/${BASE_LOG_FILE}_server.txt" > $1
echo "nohup iperf -u -s -i 1 >> tmp/cmake_targets/log/${BASE_LOG_FILE}_server.txt &" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
echo "echo \"iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\"" > $3
echo "echo \"COMMAND IS: iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\" > ${BASE_LOG_FILE}_client.txt" > $3
echo "iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1 | tee -a ${BASE_LOG_FILE}_client.txt" >> $3
ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
rm -f $3
echo "killall --signal SIGKILL iperf" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
}
function iperf_ul {
local REQ_BANDWIDTH=$5
local BASE_LOG_FILE=$6
echo "echo \"iperf -u -s -i 1\"" > $3
echo "echo \"COMMAND IS: iperf -u -s -i 1\" > ${BASE_LOG_FILE}_server.txt" > $3
echo "nohup iperf -u -s -i 1 >> ${BASE_LOG_FILE}_server.txt &" >> $3
ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
rm $3
echo "echo \"iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\"" > $1
echo "echo \"COMMAND IS: iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\" > /home/ubuntu/tmp/cmake_targets/log/${BASE_LOG_FILE}_client.txt" > $1
echo "iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1 | tee -a /home/ubuntu/tmp/cmake_targets/log/${BASE_LOG_FILE}_client.txt" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
echo "killall --signal SIGKILL iperf" >> $3
ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
rm $3
}
function check_iperf {
local LOC_BASE_LOG=$1
local LOC_REQ_BW=$2
local LOC_REQ_BW_MINUS_ONE=`echo "$LOC_REQ_BW - 1" | bc -l`
if [ -f ${LOC_BASE_LOG}_client.txt ]
then
local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt`
if [ $FILE_COMPLETE -eq 0 ]
then
IPERF_STATUS=-1
else
local EFFECTIVE_BANDWIDTH=`tail -n3 ${LOC_BASE_LOG}_client.txt | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
if [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW}.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_ONE}.*Mbits.* ]]
then
echo "got requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
else
IPERF_STATUS=-1
fi
fi
else
IPERF_STATUS=-1
fi
}
function terminate_enb_ue_basic_sim {
echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" > $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=enb_daemon --stop\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=enb_daemon --stop; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=ue_daemon --stop\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=ue_daemon --stop; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
echo "echo \"ps -aux | grep softmodem\"" >> $1
echo "ps -aux | grep softmodem | grep -v grep" >> $1
echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGINT lte-softmodem\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGINT lte-softmodem; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
echo "echo \"ps -aux | grep softmodem\"" >> $1
echo "ps -aux | grep softmodem | grep -v grep" >> $1
echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-softmodem\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-softmodem; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-uesoftmodem\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-uesoftmodem; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
echo "echo \"ps -aux | grep softmodem\"" >> $1
echo "ps -aux | grep softmodem | grep -v grep" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function recover_core_dump {
local IS_SEG_FAULT=`egrep -ic "segmentation fault" $3`
if [ $IS_SEG_FAULT -ne 0 ]
then
local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
echo "Segmentation fault detected on enb -> recovering core dump"
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
echo "sync" >> $1
echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
echo "sudo rm core" >> $1
echo "rm ci-lte-basic-sim.conf" >> $1
echo "sync" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/basic_simulator/enb/basic-simulator-enb-core-${TC}.bz2 $4
rm -f $1
fi
}
function install_epc_on_vm {
local LOC_EPC_VM_NAME=$1
local LOC_EPC_VM_CMDS=$2
if [ -d /opt/ltebox-archives/ ]
then
# Checking if all ltebox archives are available to run ltebx epc on a brand new VM
if [ -f /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ] && [ -f /opt/ltebox-archives/etc-conf.zip ] && [ -f /opt/ltebox-archives/hss-sim.zip ]
then
echo "############################################################"
echo "Test EPC on VM ($EPC_VM_NAME) will be using ltebox"
echo "############################################################"
LTEBOX=1
fi
fi
# Here we could have other types of EPC detection
# Do we need to start the EPC VM
echo "EPC_VM_CMD_FILE = $LOC_EPC_VM_CMDS"
IS_EPC_VM_ALIVE=`uvt-kvm list | grep -c $LOC_EPC_VM_NAME`
if [ $IS_EPC_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Creating test EPC VM ($LOC_EPC_VM_NAME) on Ubuntu Cloud Image base"
echo "############################################################"
uvt-kvm create $LOC_EPC_VM_NAME release=xenial --unsafe-caching
fi
uvt-kvm wait $LOC_EPC_VM_NAME --insecure
local LOC_EPC_VM_IP_ADDR=`uvt-kvm ip $LOC_EPC_VM_NAME`
echo "$LOC_EPC_VM_NAME has for IP addr = $LOC_EPC_VM_IP_ADDR"
scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
# ltebox specific actions (install and start)
LTE_BOX_TO_INSTALL=1
if [ $LTEBOX -eq 1 ]
then
echo "ls -ls /opt/ltebox/tools/start_ltebox" > $LOC_EPC_VM_CMDS
RESPONSE=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
NB_EXES=`echo $RESPONSE | grep -c ltebox`
if [ $NB_EXES -eq 1 ]; then LTE_BOX_TO_INSTALL=0; fi
fi
if [ $LTEBOX -eq 1 ] && [ $LTE_BOX_TO_INSTALL -eq 1 ]
then
echo "############################################################"
echo "Copying ltebox archives into EPC VM ($LOC_EPC_VM_NAME)"
echo "############################################################"
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/etc-conf.zip ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/hss-sim.zip ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
echo "############################################################"
echo "Install EPC on EPC VM ($LOC_EPC_VM_NAME)"
echo "############################################################"
echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $LOC_EPC_VM_CMDS
echo "touch /home/ubuntu/.hushlogin" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo apt-get --yes --quiet install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf\"" >> $LOC_EPC_VM_CMDS
echo "sudo apt-get update > zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
echo "sudo apt-get --yes install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf >> zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
# Installing HSS
echo "echo \"cd /opt\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo unzip -qq /home/ubuntu/hss-sim.zip\"" >> $LOC_EPC_VM_CMDS
echo "sudo unzip -qq /home/ubuntu/hss-sim.zip" >> $LOC_EPC_VM_CMDS
echo "echo \"cd /opt/hss_sim0609\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt/hss_sim0609" >> $LOC_EPC_VM_CMDS
# Installing ltebox
echo "echo \"cd /home/ubuntu\"" >> $LOC_EPC_VM_CMDS
echo "cd /home/ubuntu" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb \"" >> $LOC_EPC_VM_CMDS
echo "sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb >> zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
echo "echo \"cd /opt/ltebox/etc/\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt/ltebox/etc/" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo unzip -qq -o /home/ubuntu/etc-conf.zip\"" >> $LOC_EPC_VM_CMDS
echo "sudo unzip -qq -o /home/ubuntu/etc-conf.zip" >> $LOC_EPC_VM_CMDS
echo "sudo sed -i -e 's#EPC_VM_IP_ADDRESS#$LOC_EPC_VM_IP_ADDR#' gw.conf" >> $LOC_EPC_VM_CMDS
echo "sudo sed -i -e 's#EPC_VM_IP_ADDRESS#$LOC_EPC_VM_IP_ADDR#' mme.conf" >> $LOC_EPC_VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS
rm -f $LOC_EPC_VM_CMDS
fi
}
function start_epc {
local LOC_EPC_VM_NAME=$1
local LOC_EPC_VM_CMDS=$2
local LOC_EPC_VM_IP_ADDR=$3
if [ $LTEBOX -eq 1 ]
then
echo "############################################################"
echo "Start EPC on EPC VM ($LOC_EPC_VM_NAME)"
echo "############################################################"
echo "echo \"cd /opt/hss_sim0609\"" > $LOC_EPC_VM_CMDS
echo "cd /opt/hss_sim0609" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real\"" >> $LOC_EPC_VM_CMDS
echo "sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real" >> $LOC_EPC_VM_CMDS
echo "echo \"cd /opt/ltebox/tools/\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt/ltebox/tools/" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo ./start_ltebox\"" >> $LOC_EPC_VM_CMDS
echo "nohup sudo ./start_ltebox > /home/ubuntu/ltebox.txt" >> $LOC_EPC_VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS
rm -f $LOC_EPC_VM_CMDS
i="0"
echo "ifconfig tun5 | egrep -c \"inet addr\"" > $LOC_EPC_VM_CMDS
while [ $i -lt 10 ]
do
sleep 2
CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $LOC_EPC_VM_CMDS
if [ $i -lt 50 ]
then
echo "Problem w/ starting ltebox EPC"
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
fi
# HERE ADD ANY INSTALL ACTIONS FOR ANOTHER EPC
}
function retrieve_real_epc_ip_addr {
local LOC_EPC_VM_NAME=$1
local LOC_EPC_VM_CMDS=$2
local LOC_EPC_VM_IP_ADDR=$3
if [ $LTEBOX -eq 1 ]
then
# in our configuration file, we are using pool 5
echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $LOC_EPC_VM_CMDS
REAL_EPC_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
echo "EPC IP Address is : $REAL_EPC_IP_ADDR"
rm $LOC_EPC_VM_CMDS
fi
}
function terminate_epc {
if [ $LTEBOX -eq 1 ]
then
echo "echo \"cd /opt/ltebox/tools\"" > $1
echo "cd /opt/ltebox/tools" >> $1
echo "echo \"sudo ./stop_ltebox\"" >> $1
echo "sudo ./stop_ltebox" >> $1
echo "echo \"sudo daemon --name=simulated_hss --stop\"" >> $1
echo "sudo daemon --name=simulated_hss --stop" >> $1
echo "echo \"sudo killall --signal SIGKILL hss_sim\"" >> $1
echo "sudo killall --signal SIGKILL hss_sim" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
fi
}
function start_flexran_ctrl {
echo "cd /home/ubuntu/tmp" > $1
echo "if [ -f cmake_targets/log/flexran_ctl_run.log ]; then rm -f cmake_targets/log/flexran_ctl_run.log cmake_targets/log/flexran_ctl_query*.log; fi" >> $1
echo "echo \" sudo build/rt_controller -c log_config/basic_log\"" >> $1
echo "nohup sudo build/rt_controller -c log_config/basic_log > cmake_targets/log/flexran_ctl_run.log 2>&1 &" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
sleep 10
}
function stop_flexran_ctrl {
echo "echo \"sudo killall --signal SIGKILL rt_controller\"" > $1
echo "sudo killall --signal SIGKILL rt_controller" > $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
sleep 2
}
function query_flexran_ctrl_status {
local LOC_MESSAGE=$3
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"------------------------------------------------------------\" > cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
echo "echo \"LOG_NAME: $LOC_MESSAGE\" >> cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
echo "echo \"------------------------------------------------------------\" >> cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
echo "curl http://localhost:9999/stats | jq '.' | tee -a cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
}
function build_ue_on_separate_folder {
echo "mkdir tmp-ue" > $1
echo "cd tmp-ue" >> $1
echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $1
echo "unzip -qq -DD ../localZip.zip" >> $1
# We may have some adaptation to do
if [ -f /opt/ltebox-archives/adapt_ue_l2_sim.txt ]
then
echo "############################################################"
echo "Doing some adaptation on UE side"
echo "############################################################"
cat /opt/ltebox-archives/adapt_ue_l2_sim.txt >> $1
fi
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd cmake_targets/" >> $1
echo "mkdir log" >> $1
echo "chmod 777 log" >> $1
echo "echo \"./build_oai --UE -t ETHERNET \"" >> $1
echo "./build_oai --UE -t ETHERNET > log/ue-build.txt 2>&1" >> $1
echo "cd tools" >> $1
echo "sudo ifconfig lo: 127.0.0.2 netmask 255.0.0.0 up" >> $1
echo "sudo chmod 666 /etc/iproute2/rt_tables" >> $1
echo "source init_nas_s1 UE" >> $1
echo "ifconfig" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function start_l2_sim_enb {
local LOC_VM_IP_ADDR=$2
local LOC_EPC_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_NB_RBS=$5
local LOC_CONF_FILE=$6
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
sleep 10
rm $1
}
function start_l2_sim_ue {
local LOC_VM_IP_ADDR=$2
local LOC_LOG_FILE=$3
local LOC_CONF_FILE=$4
echo "echo \"cd /home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/" >> $1
echo "cd /home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/" >> $1
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp-ue/ci-scripts/conf_files/$LOC_CONF_FILE --L2-emul 3 --num-ues 1\" > ./my-lte-softmodem-run.sh " >> $1
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
sleep 10
rm $1
}
function run_test_on_vm {
echo "############################################################"
echo "OAI CI VM script"
echo "############################################################"
echo "VM_NAME = $VM_NAME"
echo "VM_CMD_FILE = $VM_CMDS"
echo "JENKINS_WKSP = $JENKINS_WKSP"
echo "ARCHIVES_LOC = $ARCHIVES_LOC"
echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
if [ "$RUN_OPTIONS" == "none" ]
then
echo "No run on VM testing for this variant currently"
exit $STATUS
fi
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
echo "############################################################"
echo "Running test script on VM ($VM_NAME)"
echo "############################################################"
echo "echo \"sudo apt-get --yes --quiet install bc \"" > $VM_CMDS
echo "sudo apt-get update > bc-install.txt 2>&1" >> $VM_CMDS
echo "sudo apt-get --yes install bc >> bc-install.txt 2>&1" >> $VM_CMDS
echo "cd tmp" >> $VM_CMDS
echo "echo \"source oaienv\"" >> $VM_CMDS
echo "source oaienv" >> $VM_CMDS
echo "echo \"cd cmake_targets/autotests\"" >> $VM_CMDS
echo "cd cmake_targets/autotests" >> $VM_CMDS
echo "echo \"rm -Rf log\"" >> $VM_CMDS
echo "rm -Rf log" >> $VM_CMDS
echo "$RUN_OPTIONS" | sed -e 's@"@\\"@g' -e 's@^@echo "@' -e 's@$@"@' >> $VM_CMDS
echo "$RUN_OPTIONS" >> $VM_CMDS
echo "cp /home/ubuntu/bc-install.txt log" >> $VM_CMDS
echo "cd log" >> $VM_CMDS
echo "zip -r -qq tmp.zip *.* 0*" >> $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
echo "############################################################"
echo "Creating a tmp folder to store results and artifacts"
echo "############################################################"
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/autotests/log/tmp.zip $ARCHIVES_LOC
pushd $ARCHIVES_LOC
unzip -qq -DD tmp.zip
rm tmp.zip
if [ -f results_autotests.xml ]
then
FUNCTION=`echo $VM_NAME | sed -e "s@$VM_TEMPLATE@@"`
NEW_NAME=`echo "results_autotests.xml" | sed -e "s@results_autotests@results_autotests-$FUNCTION@"`
echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $NEW_NAME
echo "<?xml-stylesheet type=\"text/xsl\" href=\"$FUNCTION.xsl\" ?>" >> $NEW_NAME
cat results_autotests.xml >> $NEW_NAME
sed -e "s@TEMPLATE@$FUNCTION@" $JENKINS_WKSP/ci-scripts/template.xsl > $FUNCTION.xsl
#mv results_autotests.xml $NEW_NAME
rm results_autotests.xml
fi
popd
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VM"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
fi
rm -f $VM_CMDS
echo "############################################################"
echo "Checking run status"
echo "############################################################"
LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
NB_FOUND_FILES=0
NB_RUNS=0
NB_FAILURES=0
for FULLFILE in $LOG_FILES
do
TESTSUITES=`egrep "testsuite errors" $FULLFILE`
for TESTSUITE in $TESTSUITES
do
if [[ "$TESTSUITE" == *"tests="* ]]
then
RUNS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_RUNS=$((NB_RUNS + RUNS))
fi
if [[ "$TESTSUITE" == *"failures="* ]]
then
FAILS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_FAILURES=$((NB_FAILURES + FAILS))
fi
done
NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
done
echo "NB_FOUND_FILES = $NB_FOUND_FILES"
echo "NB_RUNS = $NB_RUNS"
echo "NB_FAILURES = $NB_FAILURES"
if [ $NB_FOUND_FILES -eq 0 ]; then STATUS=-1; fi
if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# Starting EPC
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# We may have some adaptation to do
if [ -f /opt/ltebox-archives/adapt_ue_sim.txt ]
then
echo "############################################################"
echo "Doing some adaptation on UE side"
echo "############################################################"
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < /opt/ltebox-archives/adapt_ue_sim.txt
fi
echo "############################################################"
echo "Starting the eNB in FDD-5MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in FDD-5MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=fdd_05MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
echo "############################################################"
echo "Iperf UL"
echo "############################################################"
CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_ul
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
echo "############################################################"
echo "Starting the eNB in FDD-10MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_10MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-fdd-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in FDD-10MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_10MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2680
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=fdd_10MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
echo "############################################################"
echo "Iperf UL"
echo "############################################################"
CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_ul
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
echo "############################################################"
echo "Starting the eNB in FDD-20MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_20MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-fdd-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in FDD-20MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_20MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2680
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=fdd_20MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
CURR_IPERF_LOG_BASE=fdd_20MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
if [ -d $JENKINS_WKSP/flexran ]
then
echo "############################################################"
echo "Flexran testing is possible"
echo "############################################################"
local j="0"
while [ $j -lt 20 ]
do
if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
then
echo "Found an proper flexran controller vm build"
j="100"
else
j=$[$j+1]
sleep 30
fi
done
if [ $j -lt 50 ]
then
echo "ERROR: compiling flexran controller on vm went wrong"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
FLEXRAN_CTL_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#flexran-rtc#"`
FLEXRAN_CTL_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#flexran-rtc-cmds#"`
IS_FLEXRAN_VM_ALIVE=`uvt-kvm list | grep -c $FLEXRAN_CTL_VM_NAME`
if [ $IS_FLEXRAN_VM_ALIVE -eq 0 ]
then
echo "ERROR: Flexran Ctl VM is not alive"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
uvt-kvm wait $FLEXRAN_CTL_VM_NAME --insecure
FLEXRAN_CTL_VM_IP_ADDR=`uvt-kvm ip $FLEXRAN_CTL_VM_NAME`
echo "$FLEXRAN_CTL_VM_NAME has for IP addr = $FLEXRAN_CTL_VM_IP_ADDR"
echo "FLEXRAN_CTL_VM_CMDS = $FLEXRAN_CTL_VM_CMDS"
echo "############################################################"
echo "Starting the FLEXRAN CONTROLLER"
echo "############################################################"
start_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 01_no_enb_connected
echo "############################################################"
echo "Starting the eNB in FDD-5MHz mode with Flexran ON"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_05fMHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 02_enb_connected
echo "############################################################"
echo "Starting the UE in FDD-5MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_05fMHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 03_enb_ue_connected
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
sleep 30
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
echo "############################################################"
echo "Stopping the FLEXRAN CONTROLLER"
echo "############################################################"
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$FLEXRAN_CTL_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/flexran_ctl_*.log $ARCHIVES_LOC
fi
echo "############################################################"
echo "Starting the eNB in TDD-5MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=tdd_05MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-tdd-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in TDD-5MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=tdd_05MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2350
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=tdd_05MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
# Bug in TDD 5Mhz --- not running it
# echo "############################################################"
# echo "Iperf DL"
# echo "############################################################"
# CURR_IPERF_LOG_BASE=tdd_05MHz_iperf_dl
# iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
# check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
echo "############################################################"
echo "Starting the eNB in TDD-10MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=tdd_10MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-tdd-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in TDD-10MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=tdd_10MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2350
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=tdd_10MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
CURR_IPERF_LOG_BASE=tdd_10MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
# Disabling TDD-20MHz in order to stop getting false negatives
# echo "############################################################"
# echo "Starting the eNB in TDD-20MHz mode"
# echo "############################################################"
# CURRENT_ENB_LOG_FILE=tdd_20MHz_enb.log
# start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-tdd-basic-sim.conf none
#
# echo "############################################################"
# echo "Starting the UE in TDD-20MHz mode"
# echo "############################################################"
# CURRENT_UE_LOG_FILE=tdd_20MHz_ue.log
# start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2350
# if [ $UE_SYNC -eq 0 ]
# then
# echo "Problem w/ eNB and UE not syncing"
# terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
# recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
# terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
# echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
# exit -1
# fi
# get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
#
# echo "############################################################"
# echo "Pinging the UE"
# echo "############################################################"
# PING_LOG_FILE=tdd_20MHz_ping_ue.txt
# ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
# check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
#
# echo "############################################################"
# echo "Iperf DL"
# echo "############################################################"
# CURR_IPERF_LOG_BASE=tdd_20MHz_iperf_dl
# iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
# check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
#
# echo "############################################################"
# echo "Terminate enb/ue simulators"
# echo "############################################################"
# terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
# recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
# sleep 10
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VMs"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
uvt-kvm destroy $EPC_VM_NAME
ssh-keygen -R $EPC_VM_IP_ADDR
if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
then
uvt-kvm destroy $FLEXRAN_CTL_VM_NAME
ssh-keygen -R $FLEXRAN_CTL_VM_IP_ADDR
fi
fi
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-l2-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Building UE elsewhere in VM
build_ue_on_separate_folder $VM_CMDS $VM_IP_ADDR
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#l2-epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# Starting EPC
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "############################################################"
echo "Starting the eNB in FDD-5MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
start_l2_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf
echo "############################################################"
echo "Starting the UEs"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
start_l2_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf
sleep 30
echo "ping -I oip1 -c 20 $REAL_EPC_IP_ADDR" > $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VMs"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
uvt-kvm destroy $EPC_VM_NAME
ssh-keygen -R $EPC_VM_IP_ADDR
fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
}