Something went wrong on our end
Forked from
oai / openairinterface5G
19690 commits behind the upstream repository.
-
Raphael Defosseux authoredSigned-off-by:Raphael Defosseux <raphael.defosseux@eurecom.fr>
Raphael Defosseux authoredSigned-off-by:
runTestOnVM.sh 90.37 KiB
#!/bin/bash
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
function run_test_usage {
echo "OAI CI VM script"
echo " Original Author: Raphael Defosseux"
echo " Requirements:"
echo " -- uvtool uvtool-libvirt apt-cacher"
echo " -- xenial image already synced"
echo " Default:"
echo " -- eNB with USRP"
echo ""
echo "Usage:"
echo "------"
echo " oai-ci-vm-tool test [OPTIONS]"
echo ""
echo "Options:"
echo "--------"
echo " --job-name #### OR -jn ####"
echo " Specify the name of the Jenkins job."
echo ""
echo " --build-id #### OR -id ####"
echo " Specify the build ID of the Jenkins job."
echo ""
echo " --workspace #### OR -ws ####"
echo " Specify the workspace."
echo ""
variant_usage
echo " Specify the variant to build."
echo ""
echo " --keep-vm-alive OR -k"
echo " Keep the VM alive after the build."
echo ""
echo " --help OR -h"
echo " Print this help message."
echo ""
}
function start_basic_sim_enb {
local LOC_VM_IP_ADDR=$2
local LOC_EPC_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_NB_RBS=$5
local LOC_CONF_FILE=$6
local LOC_FLEXRAN_CTL_IP_ADRR=$7
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"export ENODEB=1\"" >> $1
echo "export ENODEB=1" >> $1
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
if [[ $LOC_FLEXRAN_CTL_IP_ADRR =~ .*none.* ]]
then
echo "sed -i -e 's#CI_FLEXRAN_CTL_IP_ADDR#127.0.0.1#' ci-$LOC_CONF_FILE" >> $1
else
echo "sed -i -e 's#FLEXRAN_ENABLED = .*no.*;#FLEXRAN_ENABLED = \"yes\";#' -e 's#CI_FLEXRAN_CTL_IP_ADDR#$LOC_FLEXRAN_CTL_IP_ADRR#' ci-$LOC_CONF_FILE" >> $1
fi
echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
rm $1
sleep 5
local i="0"
echo "egrep -c \"got sync\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
sleep 5
i=$[$i+1]
fi
done
ENB_SYNC=0
rm $1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "Basic-Sim eNB: eNB did NOT got sync"
else
echo "Basic-Sim eNB: eNB GOT SYNC --> waiting for UE to connect"
fi
sleep 5
}
function start_basic_sim_ue {
local LOC_UE_LOG_FILE=$3
local LOC_NB_RBS=$4
local LOC_FREQUENCY=$5
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
local i="0"
echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
UE_SYNC=1
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "Basic-Sim UE: oaitun_ue1 is DOWN and/or NOT CONFIGURED"
else
echo "Basic-Sim UE: oaitun_ue1 is UP and CONFIGURED"
fi
i="0"
echo "egrep -c \"Generating RRCConnectionReconfigurationComplete\" /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE" > $1
while [ $i -lt 10 ]
do
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
sleep 5
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "Basic-Sim UE: UE did NOT complete RRC Connection"
else
echo "Basic-Sim UE: UE did COMPLETE RRC Connection"
fi
}
function get_ue_ip_addr {
local LOC_IF_ID=$3
echo "ifconfig oaitun_ue${LOC_IF_ID} | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $1
UE_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1`
echo "Test UE${LOC_IF_ID} IP Address is : $UE_IP_ADDR"
rm $1
}
function get_enb_noS1_ip_addr {
echo "ifconfig oaitun_enb1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $1
ENB_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1`
echo "Test eNB IP Address is : $ENB_IP_ADDR"
rm $1
}
function ping_ue_ip_addr {
local LOC_FG_OR_BG=$5
echo "echo \"COMMAND IS: ping -c 20 $3\" > $4" > $1
echo "echo \"ping -c 20 $3\"" >> $1
if [ $LOC_FG_OR_BG -eq 0 ]
then
echo "ping -c 20 $UE_IP_ADDR >> $4 2>&1" >> $1
echo "tail -3 $4" >> $1
else
echo "nohup ping -c 20 $UE_IP_ADDR >> $4 &" >> $1
fi
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function ping_epc_ip_addr {
local LOC_IF_ID=$5
local LOC_FG_OR_BG=$6
echo "echo \"COMMAND IS: ping -I oaitun_ue${LOC_IF_ID} -c 20 $3\" > $4" > $1
echo "echo \"ping -I oaitun_ue${LOC_IF_ID} -c 20 $3\"" >> $1
if [ $LOC_FG_OR_BG -eq 0 ]
then
echo "ping -I oaitun_ue${LOC_IF_ID} -c 20 $3 >> $4 2>&1" >> $1
echo "tail -3 $4" >> $1
else
echo "nohup ping -I oaitun_ue${LOC_IF_ID} -c 20 $3 >> $4 &" >> $1
fi
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function ping_enb_ip_addr {
local LOC_FG_OR_BG=$5
echo "echo \"COMMAND IS: ping -I oaitun_enb1 -c 20 $3\" > $4" > $1
echo "echo \"ping -I oaitun_enb1 -c 20 $3\"" >> $1
if [ $LOC_FG_OR_BG -eq 0 ]
then
echo "ping -I oaitun_enb1 -c 20 $3 >> $4 2>&1" >> $1
echo "tail -3 $4" >> $1
else
echo "nohup ping -I oaitun_enb1 -c 20 $3 >> $4 &" >> $1
fi
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function check_ping_result {
local LOC_PING_FILE=$1
local LOC_NB_PINGS=$2
if [ -f $LOC_PING_FILE ]
then
local FILE_COMPLETE=`egrep -c "ping statistics" $LOC_PING_FILE`
if [ $FILE_COMPLETE -eq 0 ]
then
PING_STATUS=-1
echo "ping file incomplete"
else
local ALL_PACKET_RECEIVED=`egrep -c "$LOC_NB_PINGS received" $LOC_PING_FILE`
if [ $ALL_PACKET_RECEIVED -eq 1 ]
then
echo "got all ping packets"
else
LOC_NB_PINGS=$[$2-1]
ALL_PACKET_RECEIVED=`egrep -c "$LOC_NB_PINGS received" $LOC_PING_FILE`
if [ $ALL_PACKET_RECEIVED -eq 1 ]
then
echo "got almost all ping packets"
else
echo "got NOT all ping packets"
PING_STATUS=-1
fi
fi
fi
else
echo "ping file not present"
PING_STATUS=-1
fi
}
# In DL: iperf server should be on UE side
# -B oaitun_ue{j}-IP-Addr
# iperf client should be on EPC (S1) or eNB (noS1) side
# -c oaitun_ue{j}-IP-Addr -B oaitun_enb1-IP-Addr (in noS1)
# In UL: iperf server should be on EPC (S1) or eNB (noS1) side
# -B oaitun_enb1-IP-Addr
# iperf client should be on UE side
# -c oaitun_enb1-IP-Addr -B oaitun_ue{j}-IP-Addr (in noS1)
function generic_iperf {
local LOC_ISERVER_CMD=$1
local LOC_ISERVER_IP=$2
local LOC_ISERVER_BOND_IP=$3
local LOC_ICLIENT_CMD=$4
local LOC_ICLIENT_IP=$5
local LOC_ICLIENT_BOND_IP=$6
local LOC_REQ_BANDWIDTH=$7
local LOC_BASE_LOG_FILE=$8
local LOC_PORT_ID=$[$9+5001]
local LOC_FG_OR_BG=${10}
# Starting Iperf Server
echo "iperf -B ${LOC_ISERVER_BOND_IP} -u -s -i 1 -fm -p ${LOC_PORT_ID}"
echo "nohup iperf -B ${LOC_ISERVER_BOND_IP} -u -s -i 1 -fm -p ${LOC_PORT_ID} > ${LOC_BASE_LOG_FILE}_server.txt 2>&1 &" > ${LOC_ISERVER_CMD}
ssh -T -o StrictHostKeyChecking=no ubuntu@${LOC_ISERVER_IP} < ${LOC_ISERVER_CMD}
rm ${LOC_ISERVER_CMD}
# Starting Iperf Client
echo "iperf -c ${LOC_ISERVER_BOND_IP} -u -t 30 -b ${LOC_REQ_BANDWIDTH}M -i 1 -fm -B ${LOC_ICLIENT_BOND_IP} -p ${LOC_PORT_ID}"
echo "echo \"COMMAND IS: iperf -c ${LOC_ISERVER_BOND_IP} -u -t 30 -b ${LOC_REQ_BANDWIDTH}M -i 1 -fm -B ${LOC_ICLIENT_BOND_IP} -p ${LOC_PORT_ID}\" > ${LOC_BASE_LOG_FILE}_client.txt" > ${LOC_ICLIENT_CMD}
if [ $LOC_FG_OR_BG -eq 0 ]
then
echo "iperf -c ${LOC_ISERVER_BOND_IP} -u -t 30 -b ${LOC_REQ_BANDWIDTH}M -i 1 -fm -B ${LOC_ICLIENT_BOND_IP} -p ${LOC_PORT_ID} >> ${LOC_BASE_LOG_FILE}_client.txt 2>&1" >> ${LOC_ICLIENT_CMD}
echo "tail -3 ${LOC_BASE_LOG_FILE}_client.txt | grep -v datagram" >> ${LOC_ICLIENT_CMD}
else
echo "nohup iperf -c ${LOC_ISERVER_BOND_IP} -u -t 30 -b ${LOC_REQ_BANDWIDTH}M -i 1 -fm -B ${LOC_ICLIENT_BOND_IP} -p ${LOC_PORT_ID} >> ${LOC_BASE_LOG_FILE}_client.txt 2>&1 &" >> ${LOC_ICLIENT_CMD}
fi
ssh -T -o StrictHostKeyChecking=no ubuntu@${LOC_ICLIENT_IP} < ${LOC_ICLIENT_CMD}
rm -f ${LOC_ICLIENT_CMD}
# Stopping Iperf Server
if [ $LOC_FG_OR_BG -eq 0 ]
then
echo "killall --signal SIGKILL iperf"
echo "killall --signal SIGKILL iperf" > ${LOC_ISERVER_CMD}
ssh -T -o StrictHostKeyChecking=no ubuntu@${LOC_ISERVER_IP} < ${LOC_ISERVER_CMD}
rm ${LOC_ISERVER_CMD}
fi
}
function check_iperf {
local LOC_BASE_LOG=$1
local LOC_REQ_BW=$2
local LOC_REQ_BW_MINUS_ONE=`echo "$LOC_REQ_BW - 1" | bc -l`
local LOC_REQ_BW_MINUS_TWO=`echo "$LOC_REQ_BW - 2" | bc -l`
local LOC_REQ_BW_MINUS_THREE=`echo "$LOC_REQ_BW - 3" | bc -l`
local LOC_IS_DL=`echo $LOC_BASE_LOG | grep -c _dl`
local LOC_IS_BASIC_SIM=`echo $LOC_BASE_LOG | grep -c basic_sim`
if [ -f ${LOC_BASE_LOG}_client.txt ]
then
local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt`
if [ $FILE_COMPLETE -eq 0 ]
then
IPERF_STATUS=-1
echo "File Report not found"
else
local EFFECTIVE_BANDWIDTH=`tail -n3 ${LOC_BASE_LOG}_client.txt | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
if [ $LOC_IS_DL -eq 1 ] && [ $LOC_IS_BASIC_SIM -eq 1 ]
then
if [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW}.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_ONE}.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_TWO}.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_THREE}.*Mbits.* ]]
then
echo "got requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
else
echo "got LESS than requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
IPERF_STATUS=-1
fi
else
if [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW}.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_ONE}.*Mbits.* ]]
then
if [ $LOC_IS_DL -eq 1 ]
then
echo "got requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
else
echo "got requested UL bandwidth: $EFFECTIVE_BANDWIDTH"
fi
else
echo "not basic-sim got LESS than requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
IPERF_STATUS=-1
fi
fi
fi
else
IPERF_STATUS=-1
echo "File not found"
fi
}
function terminate_enb_ue_basic_sim {
# mode = 0 : eNB + UE
# mode = 1 : eNB
# mode = 2 : UE
local LOC_MODE=$3
echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" > $1
if [ $LOC_MODE -eq 0 ] || [ $LOC_MODE -eq 1 ]
then
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=enb_daemon --stop\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=enb_daemon --stop; fi" >> $1
fi
if [ $LOC_MODE -eq 0 ] || [ $LOC_MODE -eq 2 ]
then
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=ue_daemon --stop\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=ue_daemon --stop; fi" >> $1
fi
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
echo "echo \"ps -aux | grep softmodem\"" >> $1
echo "ps -aux | grep softmodem | grep -v grep" >> $1
echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
if [ $LOC_MODE -eq 0 ] || [ $LOC_MODE -eq 1 ]
then
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGINT lte-softmodem\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGINT lte-softmodem; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
echo "echo \"ps -aux | grep softmodem\"" >> $1
echo "ps -aux | grep softmodem | grep -v grep" >> $1
echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-softmodem\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-softmodem; fi" >> $1
fi
if [ $LOC_MODE -eq 0 ] || [ $LOC_MODE -eq 2 ]
then
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-uesoftmodem\"; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-uesoftmodem; fi" >> $1
echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
fi
echo "echo \"ps -aux | grep softmodem\"" >> $1
echo "ps -aux | grep softmodem | grep -v grep" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function recover_core_dump {
local IS_SEG_FAULT=`egrep -ic "segmentation fault" $3`
if [ $IS_SEG_FAULT -ne 0 ]
then
local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
echo "Segmentation fault detected on enb -> recovering core dump"
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
echo "sync" >> $1
echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
echo "sudo rm core" >> $1
echo "rm ci-lte-basic-sim.conf" >> $1
echo "sync" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/basic_simulator/enb/basic-simulator-enb-core-${TC}.bz2 $4
rm -f $1
fi
}
function full_terminate {
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
}
function full_basic_sim_destroy {
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VMs"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
then
uvt-kvm destroy $FLEXRAN_CTL_VM_NAME
ssh-keygen -R $FLEXRAN_CTL_VM_IP_ADDR
fi
fi
}
function install_epc_on_vm {
local LOC_EPC_VM_NAME=$1
local LOC_EPC_VM_CMDS=$2
if [ -d /opt/ltebox-archives/ ]
then
# Checking if all ltebox archives are available to run ltebx epc on a brand new VM
if [ -f /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ] && [ -f /opt/ltebox-archives/etc-conf.zip ] && [ -f /opt/ltebox-archives/hss-sim-develop.zip ]
then
echo "############################################################"
echo "Test EPC on VM ($EPC_VM_NAME) will be using ltebox"
echo "############################################################"
LTEBOX=1
fi
fi
# Here we could have other types of EPC detection
# Do we need to start the EPC VM
echo "EPC_VM_CMD_FILE = $LOC_EPC_VM_CMDS"
IS_EPC_VM_ALIVE=`uvt-kvm list | grep -c $LOC_EPC_VM_NAME`
if [ $IS_EPC_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Creating test EPC VM ($LOC_EPC_VM_NAME) on Ubuntu Cloud Image base"
echo "############################################################"
acquire_vm_create_lock
uvt-kvm create $LOC_EPC_VM_NAME release=xenial --unsafe-caching
echo "Waiting for VM to be started"
uvt-kvm wait $LOC_EPC_VM_NAME --insecure
release_vm_create_lock
else
echo "Waiting for VM to be started"
uvt-kvm wait $LOC_EPC_VM_NAME --insecure
fi
local LOC_EPC_VM_IP_ADDR=`uvt-kvm ip $LOC_EPC_VM_NAME`
echo "$LOC_EPC_VM_NAME has for IP addr = $LOC_EPC_VM_IP_ADDR"
scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
# ltebox specific actions (install and start)
LTE_BOX_TO_INSTALL=1
if [ $LTEBOX -eq 1 ]
then
echo "ls -ls /opt/ltebox/tools/start_ltebox" > $LOC_EPC_VM_CMDS
RESPONSE=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
NB_EXES=`echo $RESPONSE | grep -c ltebox`
if [ $NB_EXES -eq 1 ]; then LTE_BOX_TO_INSTALL=0; fi
fi
if [ $LTEBOX -eq 1 ] && [ $LTE_BOX_TO_INSTALL -eq 1 ]
then
echo "############################################################"
echo "Copying ltebox archives into EPC VM ($LOC_EPC_VM_NAME)"
echo "############################################################"
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/etc-conf.zip ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/hss-sim-develop.zip ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
echo "############################################################"
echo "Install EPC on EPC VM ($LOC_EPC_VM_NAME)"
echo "############################################################"
echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $LOC_EPC_VM_CMDS
echo "touch /home/ubuntu/.hushlogin" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo apt-get --yes --quiet install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf\"" >> $LOC_EPC_VM_CMDS
echo "sudo apt-get update > zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
echo "sudo apt-get --yes install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf >> zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
# Installing HSS
echo "echo \"cd /opt\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo unzip -qq /home/ubuntu/hss-sim-develop.zip\"" >> $LOC_EPC_VM_CMDS
echo "sudo unzip -qq /home/ubuntu/hss-sim-develop.zip" >> $LOC_EPC_VM_CMDS
echo "echo \"cd /opt/hss_sim0609\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt/hss_sim0609" >> $LOC_EPC_VM_CMDS
# Installing ltebox
echo "echo \"cd /home/ubuntu\"" >> $LOC_EPC_VM_CMDS
echo "cd /home/ubuntu" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb \"" >> $LOC_EPC_VM_CMDS
echo "sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb >> zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
echo "echo \"cd /opt/ltebox/etc/\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt/ltebox/etc/" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo unzip -qq -o /home/ubuntu/etc-conf.zip\"" >> $LOC_EPC_VM_CMDS
echo "sudo unzip -qq -o /home/ubuntu/etc-conf.zip" >> $LOC_EPC_VM_CMDS
echo "sudo sed -i -e 's#EPC_VM_IP_ADDRESS#$LOC_EPC_VM_IP_ADDR#' gw.conf" >> $LOC_EPC_VM_CMDS
echo "sudo sed -i -e 's#EPC_VM_IP_ADDRESS#$LOC_EPC_VM_IP_ADDR#' mme.conf" >> $LOC_EPC_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS
rm -f $LOC_EPC_VM_CMDS
fi
}
function add_user_to_epc_lists {
local LOC_EPC_VM_CMDS=$1
local LOC_EPC_VM_IP_ADDR=$2
local LOC_NB_USERS=$3
if [ $LTEBOX -eq 1 ]
then
scp -o StrictHostKeyChecking=no $JENKINS_WKSP/ci-scripts/add_user_to_subscriber_list.awk ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu/
echo "cd /opt/hss_sim0609" > $LOC_EPC_VM_CMDS
echo "if [ -e subscriber.data.orig ]; then sudo mv subscriber.data.orig subscriber.data; fi" >> $1
echo "if [ -e profile.data.orig ]; then sudo mv profile.data.orig profile.data; fi" >> $1
echo "sudo cp subscriber.data subscriber.data.orig" >> $LOC_EPC_VM_CMDS
echo "sudo cp profile.data profile.data.orig" >> $LOC_EPC_VM_CMDS
echo "sudo awk -v num_ues=$LOC_NB_USERS -f /home/ubuntu/add_user_to_subscriber_list.awk subscriber.data.orig > /tmp/subscriber.data" >> $LOC_EPC_VM_CMDS
echo "sudo awk -v num_ues=$LOC_NB_USERS -f /home/ubuntu/add_user_to_subscriber_list.awk profile.data.orig > /tmp/profile.data" >> $LOC_EPC_VM_CMDS
echo "sudo cp /tmp/subscriber.data subscriber.data" >> $LOC_EPC_VM_CMDS
echo "sudo cp /tmp/profile.data profile.data" >> $LOC_EPC_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS
rm -f $LOC_EPC_VM_CMDS
fi
}
function start_epc {
local LOC_EPC_VM_NAME=$1
local LOC_EPC_VM_CMDS=$2
local LOC_EPC_VM_IP_ADDR=$3
if [ $LTEBOX -eq 1 ]
then
echo "############################################################"
echo "Start EPC on EPC VM ($LOC_EPC_VM_NAME)"
echo "############################################################"
echo "echo \"cd /opt/hss_sim0609\"" > $LOC_EPC_VM_CMDS
echo "cd /opt/hss_sim0609" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real\"" >> $LOC_EPC_VM_CMDS
echo "sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real" >> $LOC_EPC_VM_CMDS
echo "echo \"cd /opt/ltebox/tools/\"" >> $LOC_EPC_VM_CMDS
echo "cd /opt/ltebox/tools/" >> $LOC_EPC_VM_CMDS
echo "echo \"sudo ./start_ltebox\"" >> $LOC_EPC_VM_CMDS
echo "nohup sudo ./start_ltebox > /home/ubuntu/ltebox.txt" >> $LOC_EPC_VM_CMDS
echo "touch /home/ubuntu/try.txt" >> $LOC_EPC_VM_CMDS
echo "sudo rm -f /home/ubuntu/*.txt" >> $LOC_EPC_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS
rm -f $LOC_EPC_VM_CMDS
i="0"
echo "ifconfig tun5 | egrep -c \"inet addr\"" > $LOC_EPC_VM_CMDS
while [ $i -lt 10 ]
do
sleep 2
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $LOC_EPC_VM_CMDS
if [ $i -lt 50 ]
then
echo "Problem w/ starting ltebox EPC"
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
exit -1
fi
fi
# HERE ADD ANY INSTALL ACTIONS FOR ANOTHER EPC
}
function retrieve_real_epc_ip_addr {
local LOC_EPC_VM_NAME=$1
local LOC_EPC_VM_CMDS=$2
local LOC_EPC_VM_IP_ADDR=$3
if [ $LTEBOX -eq 1 ]
then
# in our configuration file, we are using pool 5
echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $LOC_EPC_VM_CMDS
REAL_EPC_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
echo "EPC IP Address is : $REAL_EPC_IP_ADDR"
rm $LOC_EPC_VM_CMDS
fi
}
function terminate_epc {
if [ $LTEBOX -eq 1 ]
then
echo "echo \"cd /opt/ltebox/tools\"" > $1
echo "cd /opt/ltebox/tools" >> $1
echo "echo \"sudo ./stop_ltebox\"" >> $1
echo "sudo ./stop_ltebox" >> $1
echo "echo \"sudo daemon --name=simulated_hss --stop\"" >> $1
echo "sudo daemon --name=simulated_hss --stop" >> $1
echo "echo \"sudo killall --signal SIGKILL hss_sim\"" >> $1
echo "sudo killall --signal SIGKILL hss_sim" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
fi
}
function start_flexran_ctrl {
echo "cd /home/ubuntu/tmp" > $1
echo "if [ -f cmake_targets/log/flexran_ctl_run.log ]; then rm -f cmake_targets/log/flexran_ctl_run.log cmake_targets/log/flexran_ctl_query*.log; fi" >> $1
echo "echo \" sudo build/rt_controller -c log_config/basic_log\"" >> $1
echo "nohup sudo build/rt_controller -c log_config/basic_log > cmake_targets/log/flexran_ctl_run.log 2>&1 &" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
sleep 10
}
function stop_flexran_ctrl {
echo "echo \"sudo killall --signal SIGKILL rt_controller\"" > $1
echo "sudo killall --signal SIGKILL rt_controller" > $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
sleep 2
}
function query_flexran_ctrl_status {
local LOC_MESSAGE=$3
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"------------------------------------------------------------\" > cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
echo "echo \"LOG_NAME: $LOC_MESSAGE\" >> cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
echo "echo \"------------------------------------------------------------\" >> cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
echo "curl http://localhost:9999/stats | jq '.' | tee -a cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm $1
}
function build_ue_on_separate_folder {
echo "mkdir tmp-ue" > $1
echo "cd tmp-ue" >> $1
echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $1
echo "unzip -qq -DD ../localZip.zip" >> $1
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd cmake_targets/" >> $1
echo "mkdir log" >> $1
echo "chmod 777 log" >> $1
echo "echo \"./build_oai --UE -t ETHERNET \"" >> $1
echo "./build_oai --UE -t ETHERNET > log/ue-build.txt 2>&1" >> $1
echo "cd tools" >> $1
echo "sudo ifconfig lo: 127.0.0.2 netmask 255.0.0.0 up" >> $1
echo "sudo chmod 666 /etc/iproute2/rt_tables" >> $1
echo "source init_nas_s1 UE" >> $1
echo "ifconfig" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
}
function start_l2_sim_enb {
local LOC_ENB_VM_IP_ADDR=$2
local LOC_EPC_IP_ADDR=$3
local LOC_UE_VM_IP_ADDR=$4
local LOC_LOG_FILE=$5
local LOC_NB_RBS=$6
local LOC_CONF_FILE=$7
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$8
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_ENB_VM_IP_ADDR#' -e 's#CI_UE_IP_ADDR#$LOC_UE_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --noS1\" > ./my-lte-softmodem-run.sh " >> $1
else
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"Waiting for PHY_config_req\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
ENB_SYNC=1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "L2-SIM eNB is NOT sync'ed: process still alive?"
else
echo "L2-SIM eNB is sync'ed: waiting for UE(s) to connect"
fi
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "ifconfig oaitun_enb1 | egrep -c \"inet addr\"" > $1
# Checking oaitun_enb1 interface has now an IP address
i="0"
while [ $i -lt 10 ]
do
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
sleep 5
fi
done
rm $1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "L2-SIM eNB oaitun_enb1 is DOWN or NOT CONFIGURED"
else
echo "L2-SIM eNB oaitun_enb1 is UP and CONFIGURED"
fi
fi
sleep 10
}
function add_ue_l2_sim_ue {
local LOC_UE_VM_IP_ADDR=$2
local LOC_NB_UES=$3
echo "cd /home/ubuntu/tmp/" > $1
echo "source oaienv" >> $1
if [ $LOC_NB_UES -gt 1 ]
then
echo "echo \"cd openair3/NAS/TOOLS/\"" >> $1
echo "cd openair3/NAS/TOOLS/" >> $1
echo "echo \"awk -v num_ues=$LOC_NB_UES -f /home/ubuntu/tmp/ci-scripts/add_user_to_conf_file.awk ue_eurecom_test_sfr.conf > ue_eurecom_test_sfr_multi_ues.conf\"" >> $1
echo "awk -v num_ues=$LOC_NB_UES -f /home/ubuntu/tmp/ci-scripts/add_user_to_conf_file.awk ue_eurecom_test_sfr.conf > ue_eurecom_test_sfr_multi_ues.conf" >> $1
fi
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "sudo rm -f *.u*" >> $1
if [ $LOC_NB_UES -eq 1 ]
then
echo "echo \"sudo ../../../targets/bin/conf2uedata -c ../../../openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf -o .\"" >> $1
echo "sudo ../../../targets/bin/conf2uedata -c ../../../openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf -o . > /home/ubuntu/tmp/cmake_targets/log/ue_adapt.txt 2>&1" >> $1
else
echo "echo \"sudo ../../../targets/bin/conf2uedata -c ../../../openair3/NAS/TOOLS/ue_eurecom_test_sfr_multi_ues.conf -o .\"" >> $1
echo "sudo ../../../targets/bin/conf2uedata -c ../../../openair3/NAS/TOOLS/ue_eurecom_test_sfr_multi_ues.conf -o . > /home/ubuntu/tmp/cmake_targets/log/ue_adapt.txt 2>&1" >> $1
fi
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1
rm $1
}
function start_l2_sim_ue {
local LOC_UE_VM_IP_ADDR=$2
local LOC_ENB_VM_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_CONF_FILE=$5
local LOC_NB_UES=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
echo "echo \"sudo apt-get --yes --quiet install daemon \"" > $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "cd /home/ubuntu/tmp/ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#CI_ENB_IP_ADDR#$LOC_ENB_VM_IP_ADDR#' -e 's#CI_UE_IP_ADDR#$LOC_UE_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --L2-emul 3 --num-ues $LOC_NB_UES --nokrnmod 1 --noS1\" > ./my-lte-softmodem-run.sh " >> $1
else
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --L2-emul 3 --num-ues $LOC_NB_UES --nokrnmod 1\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"Received NFAPI_START_REQ\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
UE_SYNC=1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "L2-SIM UE is NOT sync'ed w/ eNB"
return
else
echo "L2-SIM UE is sync'ed w/ eNB"
fi
local max_interfaces_to_check=1
if [ $LOC_S1_CONFIGURATION -eq 0 ]; then max_interfaces_to_check=$LOC_NB_UES; fi
local j="1"
while [ $j -le $max_interfaces_to_check ]
do
echo "ifconfig oaitun_ue${j} | egrep -c \"inet addr\"" > $1
# Checking oaitun_ue1 interface has now an IP address
i="0"
while [ $i -lt 10 ]
do
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
sleep 5
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "L2-SIM UE oaitun_ue${j} is DOWN or NOT CONFIGURED"
else
echo "L2-SIM UE oaitun_ue${j} is UP and CONFIGURED"
fi
j=$[$j+1]
done
sleep 10
# for debug
if [ $LOC_S1_CONFIGURATION -eq 1 ]
then
echo "ifconfig" > $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1
rm $1
fi
}
function full_l2_sim_destroy {
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VMs"
echo "############################################################"
uvt-kvm destroy $ENB_VM_NAME
ssh-keygen -R $ENB_VM_IP_ADDR
uvt-kvm destroy $UE_VM_NAME
ssh-keygen -R $UE_VM_IP_ADDR
fi
}
function start_rf_sim_enb {
local LOC_ENB_VM_IP_ADDR=$2
local LOC_EPC_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_NB_RBS=$5
local LOC_CONF_FILE=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"export RFSIMULATOR=enb\"" >> $1
echo "export RFSIMULATOR=enb" >> $1
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_ENB_VM_IP_ADDR#' -e 's#CI_UE_IP_ADDR#$LOC_UE_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --noS1\" > ./my-lte-softmodem-run.sh " >> $1
else
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"got sync\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "RF-SIM eNB is NOT sync'ed: process still alive?"
else
ENB_SYNC=1
echo "RF-SIM eNB is sync'ed: waiting for UE(s) to connect"
fi
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "ifconfig oaitun_enb1 | egrep -c \"inet addr\"" > $1
# Checking oaitun_enb1 interface has now an IP address
i="0"
while [ $i -lt 10 ]
do
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
sleep 5
fi
done
rm $1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "RF-SIM eNB oaitun_enb1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM eNB oaitun_enb1 is UP and CONFIGURED"
fi
fi
sleep 10
}
function start_rf_sim_ue {
local LOC_UE_VM_IP_ADDR=$2
local LOC_ENB_VM_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_PRB=$5
local LOC_FREQUENCY=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
echo "echo \"sudo apt-get --yes --quiet install daemon \"" > $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"export RFSIMULATOR=${LOC_ENB_VM_IP_ADDR}\"" >> $1
echo "export RFSIMULATOR=${LOC_ENB_VM_IP_ADDR}" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --noS1\" > ./my-lte-softmodem-run.sh " >> $1
else
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"got sync\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
i=$[$i+1]
fi
done
UE_SYNC=1
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "RF-SIM UE is NOT sync'ed w/ eNB"
return
else
echo "RF-SIM UE is sync'ed w/ eNB"
fi
# Checking oaitun_ue1 interface has now an IP address
i="0"
echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "RF-SIM UE oaitun_ue1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM UE oaitun_ue1 is UP and CONFIGURED"
fi
sleep 10
}
function run_test_on_vm {
echo "############################################################"
echo "OAI CI VM script"
echo "############################################################"
if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) || (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
then
ENB_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#enb-ethernet#" -e "s#rf-sim#enb-ethernet#"`
ENB_VM_CMDS=${ENB_VM_NAME}_cmds.txt
echo "ENB_VM_NAME = $ENB_VM_NAME"
echo "ENB_VM_CMD_FILE = $ENB_VM_CMDS"
UE_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#ue-ethernet#" -e "s#rf-sim#ue-ethernet#"`
UE_VM_CMDS=${UE_VM_NAME}_cmds.txt
echo "UE_VM_NAME = $UE_VM_NAME"
echo "UE_VM_CMD_FILE = $UE_VM_CMDS"
else
echo "VM_NAME = $VM_NAME"
echo "VM_CMD_FILE = $VM_CMDS"
fi
echo "JENKINS_WKSP = $JENKINS_WKSP"
echo "ARCHIVES_LOC = $ARCHIVES_LOC"
if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) || (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
then
echo "############################################################"
echo "Waiting for ENB VM to be started"
echo "############################################################"
uvt-kvm wait $ENB_VM_NAME --insecure
ENB_VM_IP_ADDR=`uvt-kvm ip $ENB_VM_NAME`
echo "$ENB_VM_NAME has for IP addr = $ENB_VM_IP_ADDR"
echo "############################################################"
echo "Waiting for UE VM to be started"
echo "############################################################"
uvt-kvm wait $UE_VM_NAME --insecure
UE_VM_IP_ADDR=`uvt-kvm ip $UE_VM_NAME`
echo "$UE_VM_NAME has for IP addr = $UE_VM_IP_ADDR"
else
echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
fi
if [ "$RUN_OPTIONS" == "none" ]
then
echo "No run on VM testing for this variant currently"
return
fi
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
echo "############################################################"
echo "Running test script on VM ($VM_NAME)"
echo "############################################################"
echo "echo \"sudo apt-get --yes --quiet install bc \"" > $VM_CMDS
echo "sudo apt-get update > bc-install.txt 2>&1" >> $VM_CMDS
echo "sudo apt-get --yes install bc >> bc-install.txt 2>&1" >> $VM_CMDS
echo "cd tmp" >> $VM_CMDS
echo "echo \"source oaienv\"" >> $VM_CMDS
echo "source oaienv" >> $VM_CMDS
echo "echo \"cd cmake_targets/autotests\"" >> $VM_CMDS
echo "cd cmake_targets/autotests" >> $VM_CMDS
echo "echo \"rm -Rf log\"" >> $VM_CMDS
echo "rm -Rf log" >> $VM_CMDS
echo "$RUN_OPTIONS" | sed -e 's@"@\\"@g' -e 's@^@echo "@' -e 's@$@"@' >> $VM_CMDS
echo "$RUN_OPTIONS" >> $VM_CMDS
echo "cp /home/ubuntu/bc-install.txt log" >> $VM_CMDS
echo "cd log" >> $VM_CMDS
echo "zip -r -qq tmp.zip *.* 0*" >> $VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
echo "############################################################"
echo "Creating a tmp folder to store results and artifacts"
echo "############################################################"
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/autotests/log/tmp.zip $ARCHIVES_LOC
pushd $ARCHIVES_LOC
unzip -qq -DD tmp.zip
rm tmp.zip
if [ -f results_autotests.xml ]
then
FUNCTION=`echo $VM_NAME | sed -e "s@$VM_TEMPLATE@@"`
NEW_NAME=`echo "results_autotests.xml" | sed -e "s@results_autotests@results_autotests-$FUNCTION@"`
echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $NEW_NAME
echo "<?xml-stylesheet type=\"text/xsl\" href=\"$FUNCTION.xsl\" ?>" >> $NEW_NAME
cat results_autotests.xml >> $NEW_NAME
sed -e "s@TEMPLATE@$FUNCTION@" $JENKINS_WKSP/ci-scripts/template.xsl > $FUNCTION.xsl
#mv results_autotests.xml $NEW_NAME
rm results_autotests.xml
fi
popd
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VM"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
fi
rm -f $VM_CMDS
echo "############################################################"
echo "Checking run status"
echo "############################################################"
LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
NB_FOUND_FILES=0
NB_RUNS=0
NB_FAILURES=0
for FULLFILE in $LOG_FILES
do
TESTSUITES=`egrep "testsuite errors" $FULLFILE`
for TESTSUITE in $TESTSUITES
do
if [[ "$TESTSUITE" == *"tests="* ]]
then
RUNS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_RUNS=$((NB_RUNS + RUNS))
fi
if [[ "$TESTSUITE" == *"failures="* ]]
then
FAILS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_FAILURES=$((NB_FAILURES + FAILS))
fi
done
NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
done
echo "NB_FOUND_FILES = $NB_FOUND_FILES"
echo "NB_RUNS = $NB_RUNS"
echo "NB_FAILURES = $NB_FAILURES"
if [ $NB_FOUND_FILES -eq 0 ]; then STATUS=-1; fi
if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# Starting EPC
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
TRANS_MODES=("fdd" "tdd")
BW_CASES=(05 10 20)
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
# Not Running in TDD-10MHz and TDD-20MHz : too unstable
#if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*10.* ]]; then continue; fi
#if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then continue; fi
if [[ $BW =~ .*05.* ]]; then PRB=25; fi
if [[ $BW =~ .*10.* ]]; then PRB=50; fi
if [[ $BW =~ .*20.* ]]; then PRB=100; fi
if [[ $TMODE =~ .*fdd.* ]]; then FREQUENCY=2680; else FREQUENCY=2350; fi
echo "############################################################"
echo "Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE $PRB lte-${TMODE}-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
full_basic_sim_destroy
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR 1
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
# Not more testing in any TDD : too unstable
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*05.* ]]; then full_terminate; continue; fi
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*10.* ]]; then full_terminate; continue; fi
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then full_terminate; continue; fi
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
if [[ $TMODE =~ .*fdd.* ]]
then
if [[ $BW =~ .*20.* ]]; then THROUGHPUT=12; else THROUGHPUT=10; fi
else
THROUGHPUT=6
fi
CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_dl
generic_iperf $VM_CMDS $VM_IP_ADDR $UE_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 0 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
# Not more testing in FDD-20MHz : too unstable
if [[ $TMODE =~ .*fdd.* ]] && [[ $BW =~ .*20.* ]]; then full_terminate; continue; fi
echo "############################################################"
echo "Iperf UL"
echo "############################################################"
THROUGHPUT=2
CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_ul
generic_iperf $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $VM_CMDS $VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 0 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
full_terminate
done
done
if [ -d $JENKINS_WKSP/flexran ]
then
echo "############################################################"
echo "Flexran testing is possible"
echo "############################################################"
local j="0"
while [ $j -lt 20 ]
do
if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
then
echo "Found an proper flexran controller vm build"
j="100"
else
j=$[$j+1]
sleep 30
fi
done
if [ $j -lt 50 ]
then
echo "ERROR: compiling flexran controller on vm went wrong"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
FLEXRAN_CTL_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#flexran-rtc#"`
FLEXRAN_CTL_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#flexran-rtc-cmds#"`
IS_FLEXRAN_VM_ALIVE=`uvt-kvm list | grep -c $FLEXRAN_CTL_VM_NAME`
if [ $IS_FLEXRAN_VM_ALIVE -eq 0 ]
then
echo "ERROR: Flexran Ctl VM is not alive"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
full_basic_sim_destroy
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
uvt-kvm wait $FLEXRAN_CTL_VM_NAME --insecure
FLEXRAN_CTL_VM_IP_ADDR=`uvt-kvm ip $FLEXRAN_CTL_VM_NAME`
echo "$FLEXRAN_CTL_VM_NAME has for IP addr = $FLEXRAN_CTL_VM_IP_ADDR"
echo "FLEXRAN_CTL_VM_CMDS = $FLEXRAN_CTL_VM_CMDS"
echo "############################################################"
echo "Starting the FLEXRAN CONTROLLER"
echo "############################################################"
start_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 01_no_enb_connected
echo "############################################################"
echo "Starting the eNB in FDD-5MHz mode with Flexran ON"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_05fMHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 02_enb_connected
echo "############################################################"
echo "Starting the UE in FDD-5MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_05fMHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 03_enb_ue_connected
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR 1
sleep 30
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
echo "############################################################"
echo "Stopping the FLEXRAN CONTROLLER"
echo "############################################################"
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$FLEXRAN_CTL_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/flexran_ctl_*.log $ARCHIVES_LOC
fi
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
full_basic_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#rf-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# withS1 configuration is not working
#EPC_CONFIGS=("wS1" "noS1")
#TRANS_MODES=("fdd" "tdd")
#BW_CASES=(05 10 20)
EPC_CONFIGS=("noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo "############################################################"
echo "Start EPC for the wS1 configuration"
echo "############################################################"
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
S1_NOS1_CFG=1
else
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "############################################################"
echo "Running now in a no-S1 configuration"
echo "############################################################"
S1_NOS1_CFG=0
fi
for TMODE in ${TRANS_MODES[@]}
do
if [[ $TMODE =~ .*fdd.* ]]
then
CONF_FILE=enb.band7.tm1.50PRB.usrpb210.conf
FREQUENCY=2680
else
CONF_FILE=enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf
FREQUENCY=2350
fi
for BW in ${BW_CASES[@]}
do
if [[ $BW =~ .*05.* ]]; then PRB=25; fi
if [[ $BW =~ .*10.* ]]; then PRB=50; fi
if [[ $BW =~ .*20.* ]]; then PRB=100; fi
echo "############################################################"
echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_enb.log
start_rf_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the UE"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ue.log
start_rf_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
if [ $S1_NOS1_CFG -eq 1 ]
then
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
echo "############################################################"
echo "${CN_CONFIG} : Pinging the EPC from UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_epc.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : Pinging the eNB from UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_enb_from_ue.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE from EPC"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_ue.log
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE from eNB"
echo "############################################################"
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_from_enb_ue.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
fi
if [ $S1_NOS1_CFG -eq 0 ]
then
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
THROUGHPUT=4
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- eNB is server and UE is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul
THROUGHPUT=2
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
done
done
done
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-l2-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Building UE elsewhere in VM
#build_ue_on_separate_folder $VM_CMDS $VM_IP_ADDR
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# adding 16 users to EPC subscriber lists
add_user_to_epc_lists $EPC_VM_CMDS $EPC_VM_IP_ADDR 16
EPC_CONFIGS=("wS1" "noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
NB_USERS=(01 04)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo "############################################################"
echo "Start EPC for the wS1 configuration"
echo "############################################################"
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
S1_NOS1_CFG=1
else
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "############################################################"
echo "Running now in a no-S1 configuration"
echo "############################################################"
S1_NOS1_CFG=0
fi
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
for UES in ${NB_USERS[@]}
do
INT_NB_UES=`echo $UES | sed -e "s#^0*##"`
echo "############################################################"
echo "${CN_CONFIG} : Adding ${INT_NB_UES} UE(s) to conf file and recompile"
echo "############################################################"
add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $INT_NB_UES
echo "############################################################"
echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_enb.log
start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the UE for ${INT_NB_UES} user(s)"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ue.log
start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf $INT_NB_UES $S1_NOS1_CFG
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
if [ $S1_NOS1_CFG -eq 1 ]
then
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
full_l2_sim_destroy
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
echo "############################################################"
echo "${CN_CONFIG} : Pinging the EPC from UE(s)"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_epc.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : Pinging the eNB from UE(s)"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_seq_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE ${j} 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_para_from_ue${j}.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE ${j} 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb_para_from_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/$PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE(s) from EPC"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_ue.log
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE(s) from eNB"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_seq_ue${j}.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_para_ue${j}.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 1
j=$[$j+1]
done
sleep 25
j="1"
while [ $j -le $INT_NB_UES ]
do
PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_from_enb_para_ue${j}.log
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/$PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
j=$[$j+1]
done
fi
fi
if [ $S1_NOS1_CFG -eq 0 ]
then
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_seq_ue${j}
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
THROUGHPUT=3
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_para_ue${j}
THROUGHPUT=1
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 1
j=$[$j+1]
done
sleep 35
echo "killall --signal SIGKILL iperf"
echo "killall --signal SIGKILL iperf" > $UE_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR < $UE_VM_CMDS
rm $UE_VM_CMDS
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_dl_para_ue${j}
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/${IPERF_LOG_FILE}_client.txt | grep -v datagram
#check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
fi
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- eNB is server and UE is client"
echo "############################################################"
echo " --- Sequentially ---"
local j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_seq_ue${j}
THROUGHPUT=2
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
if [ $INT_NB_UES -gt 1 ]
then
echo " --- In parallel ---"
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_para_ue${j}
THROUGHPUT=1
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $j
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE $j 1
j=$[$j+1]
done
sleep 35
echo "killall --signal SIGKILL iperf"
echo "killall --signal SIGKILL iperf" > $UE_VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR < $UE_VM_CMDS
rm $UE_VM_CMDS
j="1"
while [ $j -le $INT_NB_UES ]
do
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_iperf_ul_para_ue${j}
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
tail -3 $ARCHIVES_LOC/${IPERF_LOG_FILE}_client.txt | grep -v datagram
#check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
j=$[$j+1]
done
fi
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
done
done
done
done
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
}