Merge with Cisco nfapi-ru-rau-split remote branch

.gitignore

+cscope.files
+cscope.files2
+cscope.in.out
+cscope.out
+cscope.po.out
+targets/bin/
+cmake_targets/log/
+cmake_targets/lte_build_oai/

README.txt

@@ -43,3 +43,4 @@ v0.5.2 -> Last version with old code for oaisim (abstraction mode works)
 v0.6 -> RRH functionality, UE greatly improved, better TDD support,
         a lot of bugs fixed. WARNING: oaisim in PHY abstraction mode does not
         work, you need to use v0.5.2 for that.
+v0.6.1 -> Mostly bugfixes. This is the last version without NFAPI.

cmake_targets/CMakeLists.txt

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *
@@ -27,8 +27,8 @@ cmake_minimum_required (VERSION 2.8)
 # Base directories, compatible with legacy OAI building
 ################################################
 set (OPENAIR_DIR     $ENV{OPENAIR_DIR})
-#set (NFAPI_DIR       $ENV{NFAPI_DIR})
-set (NFAPI_DIR       ${OPENAIR_DIR}/nfapi)
+set (NFAPI_DIR       $ENV{NFAPI_DIR})
+set (NFAPI_USER_DIR  ${OPENAIR_DIR}/nfapi)
 set (OPENAIR1_DIR    ${OPENAIR_DIR}/openair1)
 set (OPENAIR2_DIR    ${OPENAIR_DIR}/openair2)
 set (OPENAIR3_DIR    ${OPENAIR_DIR}/openair3)
@@ -291,7 +291,7 @@ elseif (${RRC_ASN1_VERSION} STREQUAL "CBA")
 elseif (${RRC_ASN1_VERSION} STREQUAL "Rel10")
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20.asn)
 else()
-  set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/RRC-e10.asn)
+  set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/RRC-e30.asn)
 endif  (${RRC_ASN1_VERSION} STREQUAL "Rel8")
 
 set (RRC_FULL_DIR ${asn1_generated_dir}/${RRC_ASN1_VERSION})
@@ -312,11 +312,11 @@ if (NOT ${ret} STREQUAL 0)
   message(FATAL_ERROR "${fix_asn1c_call}: error")
 endif (NOT ${ret} STREQUAL 0)
 file(GLOB rrc_source ${RRC_FULL_DIR}/*.c)
-set(rrc_source  ${rrc_source} ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1_msg.c)
 file(GLOB rrc_h ${RRC_FULL_DIR}/*.h)
 set(rrc_h ${rrc_h} ${RRC_FULL_DIR}/asn1_constants.h)
 set_source_files_properties(${rrc_source} PROPERTIES COMPILE_FLAGS -w) # suppress warnings from generated code
-add_library(RRC_LIB ${rrc_h} ${rrc_source})
+add_library(RRC_LIB ${rrc_h} ${rrc_source}
+    ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1_msg.c)
 include_directories ("${RRC_FULL_DIR}")
 
 # add the command to generate the source code
@@ -768,7 +768,12 @@ else()
   include_directories("${OPENAIR2_DIR}/UTIL")
   include_directories("${OPENAIR2_DIR}/UTIL/LOG")
 endif()
-include_directories("${NFAPI_DIR}")
+include_directories("${NFAPI_DIR}/nfapi/public_inc")
+include_directories("${NFAPI_DIR}/common/public_inc")
+include_directories("${NFAPI_DIR}/pnf/public_inc")
+include_directories("${NFAPI_DIR}/nfapi/inc")
+include_directories("${NFAPI_DIR}/sim_common/inc")
+include_directories("${NFAPI_DIR}/pnf_sim/inc")
 include_directories("${OPENAIR1_DIR}")
 include_directories("${OPENAIR2_DIR}/NAS")
 include_directories("${OPENAIR2_DIR}")
@@ -1010,6 +1015,58 @@ set(SCHED_SRC
 )
 add_library(SCHED_LIB ${SCHED_SRC})
 
+# nFAPI
+#################################
+set(NFAPI_COMMON_SRC
+  ${NFAPI_DIR}/common/src/debug.c
+)
+add_library(NFAPI_COMMON_LIB ${NFAPI_COMMON_SRC})
+
+include_directories(${NFAPI_DIR}/common/public_inc)
+
+set(NFAPI_SRC
+  ${NFAPI_DIR}/nfapi/src/nfapi.c
+  ${NFAPI_DIR}/nfapi/src/nfapi_p4.c
+  ${NFAPI_DIR}/nfapi/src/nfapi_p5.c
+  ${NFAPI_DIR}/nfapi/src/nfapi_p7.c
+)
+add_library(NFAPI_LIB ${NFAPI_SRC})
+
+include_directories(${NFAPI_DIR}/nfapi/public_inc)
+include_directories(${NFAPI_DIR}/nfapi/inc)
+
+set(NFAPI_PNF_SRC
+  ${NFAPI_DIR}/pnf/src/pnf.c
+  ${NFAPI_DIR}/pnf/src/pnf_interface.c
+  ${NFAPI_DIR}/pnf/src/pnf_p7.c
+  ${NFAPI_DIR}/pnf/src/pnf_p7_interface.c
+)
+add_library(NFAPI_PNF_LIB ${NFAPI_PNF_SRC})
+
+include_directories(${NFAPI_DIR}/pnf/public_inc)
+include_directories(${NFAPI_DIR}/pnf/inc)
+
+set(NFAPI_VNF_SRC
+  ${NFAPI_DIR}/vnf/src/vnf.c
+  ${NFAPI_DIR}/vnf/src/vnf_interface.c
+  ${NFAPI_DIR}/vnf/src/vnf_p7.c
+  ${NFAPI_DIR}/vnf/src/vnf_p7_interface.c
+)
+add_library(NFAPI_VNF_LIB ${NFAPI_VNF_SRC})
+
+include_directories(${NFAPI_DIR}/vnf/public_inc)
+include_directories(${NFAPI_DIR}/vnf/inc)
+
+# nFAPI user defined code
+#############################
+set(NFAPI_USER_SRC
+${NFAPI_USER_DIR}/nfapi.c
+${NFAPI_USER_DIR}/nfapi_pnf.c
+${NFAPI_USER_DIR}/nfapi_vnf.c
+)
+add_library(NFAPI_USER_LIB ${NFAPI_USER_SRC})
+include_directories(${NFAPI_USER_DIR})
+
 # Layer 1
 #############################
 set(PHY_SRC
@@ -1206,6 +1263,8 @@ add_library(L2
   ${ENB_APP_SRC})
 #  ${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
 
+include_directories(${NFAPI_USER_DIR})
+
 if (FLEXRAN_AGENT_SB_IF)
 
 #Test for adding a shared library
@@ -1619,6 +1678,13 @@ add_library(OPENAIR0_LIB
   ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
 )
 
+include_directories("${NFAPI_DIR}/nfapi/public_inc")
+include_directories("${NFAPI_DIR}/common/public_inc")
+include_directories("${NFAPI_DIR}/pnf/public_inc")
+include_directories("${NFAPI_DIR}/nfapi/inc")
+include_directories("${NFAPI_DIR}/sim_common/inc")
+include_directories("${NFAPI_DIR}/pnf_sim/inc")
+
 # System packages that are required
 # We use either the cmake buildin, in ubuntu are in: /usr/share/cmake*/Modules/
 # or cmake provide a generic interface to pkg-config that widely used
@@ -1674,6 +1740,26 @@ endif()
 add_definitions("-DNETTLE_VERSION_MAJOR=${NETTLE_VERSION_MAJOR}")
 add_definitions("-DNETTLE_VERSION_MINOR=${NETTLE_VERSION_MINOR}")
 
+#pkg_search_module(NFAPI nfapi)
+#if(NOT ${NFAPI_FOUND})
+  #message( FATAL_ERROR "PACKAGE nfapi not found: some targets will fail. Run build_oai -I again!")
+#else()
+  #include_directories(${NFAPI_INCLUDE_DIRS})
+  #message( "PACKAGE nfapi!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+  #message( "${NFAPI_INCLUDE_DIR}")
+  #message( "${NFAPI_COMMON_INCLUDE_DIR}")
+  #message( "${NFAPI_VNF_INCLUDE_DIR}")
+  #message( "${NFAPI_PNF_INCLUDE_DIR}")
+  #message( "XXX")
+  #message( "${NFAPI_LIBRARY}")
+  #message( "${NFAPI_COMMON_LIBRARY}")
+  #message( "${NFAPI_PNF_LIBRARY}")
+  #message( "XXX")
+  #message( "${NFAPI_LIBRARIES}")
+  #message( "XXX")
+#endif()
+
+
 pkg_search_module(XPM xpm)
 if(NOT ${XPM_FOUND})
   message("PACKAGE xpm not found: some targets will fail")
@@ -1729,6 +1815,12 @@ if (${T_TRACER})
   set (T_LIB "rt")
 endif (${T_TRACER})
 
+#if (${NFAPI_DIR})
+#set (NFAPI_PNF_LIB "nfapi_pnf")
+#set (NFAPI_LIB "nfapi")
+#set (NFAPI_COMMON_LIB "nfapi_common")
+#endif (${NFAPI_DIR})
+#
 #Some files in the T directory are generated.
 #This rule and the following deal with it.
 add_custom_command (
@@ -1785,10 +1877,12 @@ add_executable(lte-softmodem
   ${SHLIB_LOADER_SOURCES}
   )
 
-target_link_libraries (lte-softmodem -ldl 
+target_link_libraries (lte-softmodem
   -Wl,--start-group
   RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} ${FLEXRAN_AGENT_LIB} LFDS7
-  -Wl,--end-group )
+  NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB
+  NFAPI_USER_LIB
+  -Wl,--end-group z dl)
 
 target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES})
 target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES})
@@ -1910,22 +2004,44 @@ add_executable(oaisim
   ${SHLIB_LOADER_SOURCES}
 )
 
+#add_library( imp_nfapi STATIC IMPORTED)
+#set_property(TARGET imp_nfapi PROPERTY IMPORTED_LOCATION ${NFAPI_DIR}/libnfapi.a)
+#set_property(TARGET imp_nfapi PROPERTY IMPORTED_IMPLIB ${NFAPI_DIR}/libnfapi.a)
+#target_link_libraries(oaisim imp_nfapi)
+
+#add_library( imp_nfapi_common STATIC IMPORTED)
+#set_property(TARGET imp_nfapi_common PROPERTY IMPORTED_LOCATION ${NFAPI_DIR}/common/libnfapi_common.a)
+#set_property(TARGET imp_nfapi_common PROPERTY IMPORTED_IMPLIB ${NFAPI_DIR}/common/libnfapi_common.a)
+#target_link_libraries(oaisim imp_nfapi_common)
+
+#add_library( imp_nfapi_pnf STATIC IMPORTED)
+#set_property(TARGET imp_nfapi_pnf PROPERTY IMPORTED_LOCATION ${NFAPI_DIR}/pnf/libnfapi_pnf.a)
+#set_property(TARGET imp_nfapi_pnf PROPERTY IMPORTED_IMPLIB ${NFAPI_DIR}/pnf/libnfapi_pnf.a)
+#target_link_libraries(oaisim imp_nfapi_pnf)
+
+#
+#add_library (imp_nfapi_common STATIC IMPORTED)
+#set_target_properties(imp_nfapi_common PROPERTIES IMPORTED_LOCATION ${NFAPI_DIR}/common/libnfapi_common.a
+#set_target_properties(oaisim PROPERTIES LINK_FLAGS ${NFAPI_DIR}/nfapi/libnfapi.a ${NFAPI_DIR}/pnf/libnfapi_pnf.a ${NFAPI_DIR}/common/libnfapi_common.a)
+
+
 
 target_include_directories(oaisim PUBLIC  ${OPENAIR_TARGETS}/SIMU/USER)
 target_link_libraries (oaisim
   -Wl,-ldl,--start-group
   RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${MSC_LIB} L2 ${RAL_LIB} LIB_NAS_UE SIMU SECU_OSA ${ITTI_LIB}  ${MIH_LIB}
+  NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB
+  NFAPI_USER_LIB
   -Wl,--end-group )
 
 target_link_libraries (oaisim ${LIBXML2_LIBRARIES} ${LAPACK_LIBRARIES})
-target_link_libraries (oaisim pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES}  ${NETTLE_LIBRARIES} sctp 
-  ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${OPENPGM_LIBRARIES})