Commit d5eaa26a authored by jiangx's avatar jiangx
Browse files

changes reltated to EMOS


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6758 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent f2564402
......@@ -4,7 +4,7 @@ SRC = dump_size.c
#CFLAGS = $(shell rtai-config --lxrt-cflags)
#LDFLAGS = $(shell rtai-config --lxrt-ldflags) -lpthread -lm -lgps -lforms #-llxrt
CFLAGS += -m32 -I$(OPENAIR1_DIR) -I$(OPENAIR2_DIR)/RRC/LITE/MESSAGES
CFLAGS += -m32 -I$(OPENAIR1_DIR) -I$(OPENAIR2_DIR)/RRC/LITE/MESSAGES -I$(OPENAIR_HOME)/common/utils -I$(OPENAIR2_DIR) -I$(OPENAIR2_DIR)/COMMON
CFLAGS += -DPHYSIM -DNODE_RG -DUSER_MODE -DPC_TARGET -DPC_DSP -DNB_ANTENNAS_RX=2 -DNB_ANTENNAS_TXRX=2 -DNB_ANTENNAS_TX=2 -DPHY_CONTEXT=1
......
......@@ -25,7 +25,7 @@ PBCH_PDU_SIZE = 6;
NUMBER_OF_eNB_MAX = 3;
NUMBER_OF_UE_MAX = 2;
NUMBER_OF_SUBBANDS = 7;
NUMBER_OF_SUBBANDS = 13;
NB_ANTENNAS_RX = 2;
NB_ANTENNAS_TX = 2;
......@@ -36,14 +36,14 @@ MAX_DCI_SIZE_BITS = 45;
% EMOS_CHANNEL = 0;
% enable this line to enable error checking
% get_dump_size
get_dump_size
phy_measurements_struct = struct(...
'rssi', int32(0),...
'n_adj_cells', uint32(0),...
'rssi', uint32(0),...
'n_adj_cells', int32(0),...
'n_adj_cells_id', uint32(zeros(1,6)),...
'rsrq', int32(zeros(1,7)),...
'rsrp', int32(zeros(1,7)),...
'rsrq', uint32(zeros(1,7)),...
'rsrp', uint32(zeros(1,7)),...
'rsrp_filtered', single(zeros(1,7)),...
'rsrq_filtered', single(zeros(1,7)),...
'n0_power', uint32(zeros(1,NB_ANTENNAS_RX)),...
......@@ -53,7 +53,7 @@ phy_measurements_struct = struct(...
'n0_power_avg', uint32(0),...
'n0_power_avg_dB', uint16(0),...
'n0_power_tot_dBm', int16(0),...
'rx_spatial_power', uint32(zeros(2,2,NUMBER_OF_eNB_MAX)),...
'rx_spatial_power', int32(zeros(2,2,NUMBER_OF_eNB_MAX)),...
'rx_spatial_power_dB', uint16(zeros(2,2,NUMBER_OF_eNB_MAX)),...
'rx_power', int32(zeros(NB_ANTENNAS_RX,NUMBER_OF_eNB_MAX)),...
'rx_power_dB', uint16(zeros(NB_ANTENNAS_RX,NUMBER_OF_eNB_MAX)),...
......@@ -174,27 +174,34 @@ eNb_UE_stats_struct = struct(...
'timing_advance_update',int32(0),...
'UE_mode',uint32(0),...
'sector',uint8(0),...
'dlsch_sliding_cnt', uint32(0),...
'dlsch_ACK', uint32(zeros(1,8)),...
'dlsch_NAK', uint32(zeros(1,8)),...
'dlsch_l2_errors', uint32(0),...
'dlsch_trials', uint32(zeros(1,8)),...
'ulsch_errors', uint32(zeros(1,3)),...
'ulsch_consecutive_errors', uint32(zeros(1,3)),...
'ulsch_decoding_attempts', uint32(zeros(8,3)),...
'ulsch_round_errors', uint32(zeros(8,3)),...
'ulsch_decoding_attempts_last', uint32(zeros(8,3)),...
'ulsch_round_errors_last', uint32(zeros(8,3)),...
'ulsch_round_fer', uint32(zeros(8,3)),...
'dlsch_l2_errors', uint32(zeros(1,8)),...
'dlsch_trials', uint32(zeros(8,8)),...
'dlsch_ACK', uint32(zeros(8,8)),...
'dlsch_NAK', uint32(zeros(8,8)),...
'ulsch_errors', uint32(zeros(1,8)),...
'ulsch_consecutive_errors', uint32(0),...
'ulsch_decoding_attempts', uint32(zeros(8,8)),...
'ulsch_round_errors', uint32(zeros(8,8)),...
'ulsch_decoding_attempts_last', uint32(zeros(8,8)),...
'ulsch_round_errors_last', uint32(zeros(8,8)),...
'ulsch_round_fer', uint32(zeros(8,8)),...
'sr_received', uint32(0), ...
'sr_total', uint32(0), ...
'dlsch_sliding_cnt', uint32(0),...
'dlsch_NAK_round0', uint32(0),...
'dlsch_mcs_offset', int8(0),...
'dlsch_mcs1', uint8(0),...
'dlsch_mcs2', uint8(0),...
'total_TBS', uint32(0),...
'total_TBS_last', uint32(0),...
'dlsch_bitrate', uint32(0),...
'total_transmitted_bits', uint32(0));
'total_TBS_MAC', int32(0),...
'total_TBS', int32(0),...
'total_TBS_last', int32(0),...
'dlsch_bitrate', uint32(0)
%'total_transmitted_bits', uint32(0)
);
eNb_UE_stats_struct_a = cstruct(eNb_UE_stats_struct,[],4);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment