Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • pasolini/openairinterface5g
  • odukan/openairinterface5g
  • ewa/openairinterface5g
  • deksprime/openairinterface5g
  • jackokie/openairinterface5g
  • Srushti16/openairinterface5g
  • BRodolphe/openairinterface5g
  • kramantas/openairinterface5g
  • suraj_4g5g/openairinterface5g
  • turletti/openairinterface5g
  • anandriisc/openairinterface5g
  • lvguorong/openairinterface5g
  • dast/openairinterface5g
  • yashwanthr/openairinterface5g
  • ajiti2tb/openairinterface5g
  • qzhou/openairinterface5g
  • nickmxxx/openairinterface5g
  • bin_he4/openairinterface5g
  • delarco/openairinterface5g
  • limx1980/openairinterface5g
  • Aniq/openairinterface5g
  • yassir63/openairinterface5g
  • orc318/openairinterface5g
  • vader/openairinterface5g
  • limx59/openairinterface5g
  • nadavaati_12345/openairinterface5g
  • jenshz/openairinterface5g
  • kuldeep/openairinterface5g
  • lurker/openairinterface5g
  • shariat/openairinterface5g
  • Alireza.najafzadeh/openairinterface5g
  • Ling/openairinterface5g
  • EvanKrall/openairinterface5g
  • youyih/openairinterface5g
  • anindya/openairinterface5g
  • ahan/openairinterface5g
  • beraoud/openairinterface5g
  • obejarano/openairinterface5g
  • Monti/openairinterface5g
  • akhamsi/openairinterface5g
  • Worker.N/openairinterface5g
  • zhangtu/openairinterface5g
  • desouza/openairinterface5g
  • zhijun/openairinterface5g
  • sureshkumar/openairinterface5g
  • milan/openairinterface5g
  • bigbangbingo/openairinterface5g
  • platini/openairinterface5g
  • muralir-nv/openairinterface5g
  • Joshua_Zhang/openairinterface5g
  • siddharthmurali1/openairinterface5g
  • sorinros/openairinterface5g
  • elainecao/openairinterface5g
  • sneltved/openairinterface5g
  • aikaterini.trilyraki/openairinterface5g
  • wujunning11/openairinterface5g
  • magounak/openairinterface5g
  • ycl1729020039/openairinterface5g
  • mayukhweb/openairinterface5g
  • wataru/openairinterface5g
  • afonsoli/openairinterface5g
  • ppokar/openairinterface5g
  • emest/openairinterface5g
  • Najib/openairinterface5g
  • liqing/openairinterface5g
  • gprshome/openairinterface5g
  • Dvevgedveccc/openairinterface5g
  • Elena_Lukashova/openairinterface5g
  • imaneouss/openairinterface5g
  • yangyuan/openairinterface5g
  • ycliang/openairinterface5g
  • rohanfds/openairinterface5g
  • cong2008abc/openairinterface5g
  • Giovanni/openairinterface5g
  • willvegapunk/openairinterface5g
  • Chen/openairinterface5g
  • Ella/openairinterface5g
  • kollabalu/openairinterface5g
  • tsaichanglan/openairinterface5g
  • Artifice/openairinterface5g
  • HJR0129/openairinterface5g
  • alextp/openairinterface5g
  • Changron/openairinterface5g
  • pedosb/openairinterface5g
  • Flozzen/openairinterface5g
  • hobei/openairinterface5g
  • WP_Jing/openairinterface5g
  • reset4/openairinterface5g
  • alexjoseph/openairinterface5g
  • latuan1710/openairinterface5g
  • wynter-wang/openairinterface5g
  • stt12706/openairinterface5g
  • sy/openairinterface5g
  • dzxu/openairinterface5g
  • ptizoom/openairinterface5g
  • Thierry/openairinterface5g
  • tjamc80/openairinterface5g
  • yenmuse/openairinterface5g
  • archerling/openairinterface5g
  • grahul/openairinterface5g
  • ashish.shri/openairinterface5g
  • TianyuChen/openairinterface5g
  • cuixf1/openairinterface5g
  • Jan/openairinterface5g
  • jboatenng/openairinterface5g_gpio
  • geokal/openairinterface5g
  • johannhg/openairinterface5g
  • TofunmiA/openairinterface5g
  • razvanursu/openairinterface5g-mac-scheduling
  • Julio/openairinterface5g
  • fredrichx/openairinterface5g
  • nems/openairinterface5g
  • wb_li/openairinterface5g
  • ferrieux/openairinterface5g
  • prajna_g/openairinterface-5-g-xnap-ho
  • mtinasc/openairinterface5g
  • Hofschroeer/openairinterface5g
  • buptxiaofeng/openairinterface5g
  • fjgh_759/openairinterface5g
  • calcel/openairinterface5g
  • Reem/openairinterface5g
  • havar_mind/openairinterface5g
  • shrinish/openairinterface5g
  • YANGHELINDE/openairinterface5g
  • lool/openairinterface5g
  • raghav1900/openairinterface5g
  • allan1201/openairinterface5g
  • ferris/openairinterface5g
  • seanzw/openairinterface5g
  • emad72/openairinterface5g
  • guojilong123/openairinterface5g
  • Rony99/openairinterface5g
  • lity/openairinterface5g
  • sshrivastava/openairinterface5g
  • zhihengzhang/openairinterface5g
  • Rakesh_B_B/openairinterface5g
  • baleeiro/openairinterface5g
  • 19125064/openairinterface5g
  • linlin/openairinterface5g
  • NA1VE/openairinterface5g
  • oai1B/openairinterface5g
  • daveprice/openairinterface5g
  • mo/openairinterface5g
  • dhanmeet/openairinterface5g
  • mv2290/openairinterface-5-g-test
  • pagmatt/openairinterface5g
  • mmTestNYU/openairinterface5g
  • mmezzavilla/openairinterface5g
  • sudhakarb/openairinterface5g
  • mekki/openairinterface5g
  • virtanen/openairinterface5g
  • dyyu/openairinterface5g
  • mohammed_safwan/openairinterface5g
  • venkat/openairinterface5g
  • rupadhya/openairinterface5g
  • adjou/openairinterface5g
  • samiemostafavi/openairinterface5g-edaf
  • Sreeram/openairinterface5g
  • oliverxsch/openairinterface5g
  • oai/openairinterface5g
160 results
Show changes
Commits on Source (8)
Hide whitespace changes
Inline Side-by-side
cmake_targets/autotests/README.txt
View file @ 66fe461b
...@@ -137,7 +137,13 @@ Obj.# Case# Test# Description ...@@ -137,7 +137,13 @@ Obj.# Case# Test# Description
01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 61 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE 01 60 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
01 60 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 60 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 60 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 60 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 60 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 60 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX 01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX
01 61 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX 01 61 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
...@@ -148,7 +154,14 @@ Obj.# Case# Test# Description ...@@ -148,7 +154,14 @@ Obj.# Case# Test# Description
01 61 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 61 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE 01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
01 63 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 63 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 63 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 63 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 63 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 63 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests 01 64 lte-softmodem-noS1 tests
......
cmake_targets/autotests/test_case_list.xml
View file @ 66fe461b
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
<CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox> <CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
<ExmimoRfStop>$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail</ExmimoRfStop> <ExmimoRfStop>$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail</ExmimoRfStop>
<Timeout_execution>36000</Timeout_execution> <Timeout_execution>36000</Timeout_execution>
<TestCaseExclusionList>0104+ 015502 015505 015506 015507 015508 015508 015509 015510 015511 015602 015605 015702 015705 016102 016105</TestCaseExclusionList> <TestCaseExclusionList>0104+ 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016002 016005 016102 016105 016302 016305</TestCaseExclusionList>
<nruns_lte-softmodem>3</nruns_lte-softmodem> <nruns_lte-softmodem>3</nruns_lte-softmodem>
<MachineListGeneric>mozart calisson stevens nano amerique</MachineListGeneric> <MachineListGeneric>mozart calisson stevens nano amerique</MachineListGeneric>
<testCase id="010101" > <testCase id="010101" >
...@@ -861,10 +861,7 @@ ...@@ -861,10 +861,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
...@@ -894,11 +891,9 @@ ...@@ -894,11 +891,9 @@
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -911,15 +906,11 @@ ...@@ -911,15 +906,11 @@
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -945,10 +936,7 @@ ...@@ -945,10 +936,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
...@@ -978,11 +966,9 @@ ...@@ -978,11 +966,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -995,15 +981,11 @@ ...@@ -995,15 +981,11 @@
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1028,10 +1010,7 @@ ...@@ -1028,10 +1010,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
...@@ -1061,11 +1040,9 @@ ...@@ -1061,11 +1040,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1078,15 +1055,11 @@ ...@@ -1078,15 +1055,11 @@
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1111,10 +1084,7 @@ ...@@ -1111,10 +1084,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
...@@ -1144,11 +1114,9 @@ ...@@ -1144,11 +1114,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1161,15 +1129,11 @@ ...@@ -1161,15 +1129,11 @@
<UE_search_expr_false></UE_search_expr_false> <UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1193,10 +1157,7 @@ ...@@ -1193,10 +1157,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
...@@ -1226,11 +1187,8 @@ ...@@ -1226,11 +1187,8 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog_args></UE_compile_prog_args>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1244,15 +1202,11 @@ ...@@ -1244,15 +1202,11 @@
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1276,10 +1230,7 @@ ...@@ -1276,10 +1230,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
...@@ -1309,11 +1260,9 @@ ...@@ -1309,11 +1260,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1327,15 +1276,11 @@ ...@@ -1327,15 +1276,11 @@
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1360,10 +1305,7 @@ ...@@ -1360,10 +1305,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
...@@ -1393,11 +1335,9 @@ ...@@ -1393,11 +1335,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1410,15 +1350,11 @@ ...@@ -1410,15 +1350,11 @@
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1444,10 +1380,7 @@ ...@@ -1444,10 +1380,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
...@@ -1477,11 +1410,8 @@ ...@@ -1477,11 +1410,8 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog_args></UE_compile_prog_args>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1494,15 +1424,11 @@ ...@@ -1494,15 +1424,11 @@
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1527,10 +1453,7 @@ ...@@ -1527,10 +1453,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
...@@ -1560,11 +1483,9 @@ ...@@ -1560,11 +1483,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1577,15 +1498,11 @@ ...@@ -1577,15 +1498,11 @@
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1610,10 +1527,7 @@ ...@@ -1610,10 +1527,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
...@@ -1643,11 +1557,9 @@ ...@@ -1643,11 +1557,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1661,15 +1573,11 @@ ...@@ -1661,15 +1573,11 @@
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1693,10 +1601,7 @@ ...@@ -1693,10 +1601,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
...@@ -1726,11 +1631,9 @@ ...@@ -1726,11 +1631,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1744,15 +1647,11 @@ ...@@ -1744,15 +1647,11 @@
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -1776,10 +1675,7 @@ ...@@ -1776,10 +1675,7 @@
<EPC>amerique</EPC> <EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
...@@ -1809,11 +1705,9 @@ ...@@ -1809,11 +1705,9 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec> <UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
...@@ -1827,15 +1721,11 @@ ...@@ -1827,15 +1721,11 @@
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file></EPC_config_file>
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" <EPC_compile_prog></EPC_compile_prog>
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" <EPC_compile_prog_args></EPC_compile_prog_args>
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" <HSS_compile_prog></HSS_compile_prog>
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> <HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
...@@ -2665,14 +2555,14 @@ ...@@ -2665,14 +2555,14 @@
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file> BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog> <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog> <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args> <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
...@@ -2749,12 +2639,12 @@ ...@@ -2749,12 +2639,12 @@
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file> BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog> <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
...@@ -2833,12 +2723,12 @@ ...@@ -2833,12 +2723,12 @@
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file> BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog> <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
...@@ -3036,11 +2926,11 @@ ...@@ -3036,11 +2926,11 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file> targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog> <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args> <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec> <eNB_pre_exec>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
...@@ -3330,114 +3220,118 @@ ...@@ -3330,114 +3220,118 @@
<testCase id="016100" > <testCase id="016000" >
<class>lte-softmodem</class> <class>lte-softmodem</class>
<desc></desc> <desc></desc>
<eNB>calisson</eNB> <eNB>mozart</eNB>
<UE>stevens</UE> <UE>stevens</UE>
<EPC>amerique</EPC> <EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file> targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog> <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args> <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail </eNB_pre_exec> <eNB_pre_exec>sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args> <eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec> <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args> <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec> <eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args> <eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true> <eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false> <eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog> <UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args> <UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec> <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args> <UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true> <UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false> <UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs> <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog> BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog> <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args> <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec> <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args> <EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec> <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args> <HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec> <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args> <EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true> <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false> <EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs> <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags> <tags>USRPx310.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns> <nruns>10</nruns>
</testCase> </testCase>
<testCase id="016101" >
<testCase id="016001" >
<class>lte-softmodem</class> <class>lte-softmodem</class>
<desc></desc> <desc></desc>
<eNB>calisson</eNB> <eNB>mozart</eNB>
<UE>stevens</UE> <UE>stevens</UE>
<EPC>amerique</EPC> <EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file> targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog> <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args> <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec> <eNB_pre_exec>sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args> <eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec> <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args> <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec> <eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args> <eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true> <eNB_search_expr_true></eNB_search_expr_true>
...@@ -3445,139 +3339,1102 @@ ...@@ -3445,139 +3339,1102 @@
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog> <UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args> <UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec> <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args> <UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true> <UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false> <UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs> <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog> BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog> <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args> <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec> <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args> <EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec> <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args> <HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec> <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args> <EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true> <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false> <EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs> <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags> <tags>USRPx310.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns> <nruns>10</nruns>
</testCase> </testCase>
<testCase id="016102" > <testCase id="016002" >
<class>lte-softmodem</class> <class>lte-softmodem</class>
<desc></desc> <desc></desc>
<eNB>calisson</eNB> <eNB>mozart</eNB>
<UE>stevens</UE> <UE>stevens</UE>
<EPC>amerique</EPC> <EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file> targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog> <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args> <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec> <eNB_pre_exec>sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args> <eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec> <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args> <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016003" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>mozart</eNB>
<UE>stevens</UE>
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016004" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>mozart</eNB>
<UE>stevens</UE>
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016005" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>mozart</eNB>
<UE>stevens</UE>
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016100" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016101" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016102" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016103" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016104" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016105" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016300" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016301" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="016302" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec> <eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args> <eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true> <eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false> <eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog> <UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args> <UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec> <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args> <UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true> <UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false> <UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs> <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script> <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog> BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog> <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args> <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec> <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args> <EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec> <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args> <HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec> <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args> <EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true> <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false> <EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs> <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags> <tags>EXMIMO.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns> <nruns>10</nruns>
</testCase> </testCase>
<testCase id="016103" > <testCase id="016303" >
<class>lte-softmodem</class> <class>lte-softmodem</class>
<desc></desc> <desc></desc>
<eNB>calisson</eNB> <eNB>calisson</eNB>
<UE>stevens</UE> <UE>stevens</UE>
<EPC>amerique</EPC> <EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
...@@ -3590,7 +4447,7 @@ ...@@ -3590,7 +4447,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file> targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog> <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args> <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec> <eNB_pre_exec>sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args> <eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec> <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args> <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
...@@ -3598,63 +4455,67 @@ ...@@ -3598,63 +4455,67 @@
<eNB_traffic_exec_args></eNB_traffic_exec_args> <eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true> <eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false> <eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog> <UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args> <UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec> <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args> <UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs> <UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false> <UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog> BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog> <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args> <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec> <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args> <EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec> <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args> <HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec> <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args> <EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false> <EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs> <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags> <tags>EXMIMO.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns> <nruns>10</nruns>
</testCase> </testCase>
<testCase id="016104" > <testCase id="016304" >
<class>lte-softmodem</class> <class>lte-softmodem</class>
<desc></desc> <desc></desc>
<eNB>calisson</eNB> <eNB>calisson</eNB>
<UE>stevens</UE> <UE>stevens</UE>
<EPC>amerique</EPC> <EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
...@@ -3667,7 +4528,7 @@ ...@@ -3667,7 +4528,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file> targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog> <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args> <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec> <eNB_pre_exec>sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args> <eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec> <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args> <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
...@@ -3675,63 +4536,67 @@ ...@@ -3675,63 +4536,67 @@
<eNB_traffic_exec_args></eNB_traffic_exec_args> <eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true> <eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false> <eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog> <UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args> <UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec> <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args> <UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs> <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false> <UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog> BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog> <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args> <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec> <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args> <EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec> <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args> <HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec> <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args> <EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false> <EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs> <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags> <tags>EXMIMO.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns> <nruns>10</nruns>
</testCase> </testCase>
<testCase id="016105" > <testCase id="016305" >
<class>lte-softmodem</class> <class>lte-softmodem</class>
<desc></desc> <desc></desc>
<eNB>calisson</eNB> <eNB>calisson</eNB>
<UE>stevens</UE> <UE>stevens</UE>
<EPC>amerique</EPC> <EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd> <TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir> <eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
...@@ -3744,7 +4609,7 @@ ...@@ -3744,7 +4609,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file> targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog> <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args> <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec> <eNB_pre_exec>sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args> <eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec> <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args> <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
...@@ -3752,49 +4617,54 @@ ...@@ -3752,49 +4617,54 @@
<eNB_traffic_exec_args></eNB_traffic_exec_args> <eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true> <eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false> <eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs> <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir> <UE_working_dir>/tmp</UE_working_dir>
<UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" <UE_config_file></UE_config_file>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" <UE_compile_prog></UE_compile_prog>
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"</UE_config_file> <UE_compile_prog_args></UE_compile_prog_args>
<UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog> <UE_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' </UE_pre_exec>
<UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args> <UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec> <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args> <UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec> <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args> <UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs> <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false> <UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir> <EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.local.enb.conf.in MCC \"208\" <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
BUILD/EPC/epc.local.enb.conf.in MNC \"92\" BUILD/EPC/epc.conf.in MNC \"92\"
BUILD/EPC/epc.local.enb.conf.in TAC \"1\" BUILD/EPC/epc.conf.in TAC \"1\"
BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file> BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
<EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog> BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
<EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
<EPC_compile_prog_args>-c -l</EPC_compile_prog_args> <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
<HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog> <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
<HSS_compile_prog_args> -c -l </HSS_compile_prog_args> <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec> <EPC_pre_exec>sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args> <EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec> <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args> <EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec> <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args> <HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec> <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args> <EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false> <EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs> <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags> <tags>EXMIMO.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns> <nruns>10</nruns>
</testCase> </testCase>
</testCaseList> </testCaseList>
......
openair2/LAYER2/MAC/eNB_scheduler_primitives.c
View file @ 66fe461b
...@@ -1101,8 +1101,9 @@ boolean_t CCE_allocation_infeasible(int module_idP, ...@@ -1101,8 +1101,9 @@ boolean_t CCE_allocation_infeasible(int module_idP,
DCI_pdu->Num_ue_spec_dci++; DCI_pdu->Num_ue_spec_dci++;
ret = allocate_CCEs(module_idP,CC_idP,subframe,1); ret = allocate_CCEs(module_idP,CC_idP,subframe,1);
if (ret==-1) if (ret==-1)
res = FALSE; res = TRUE;
DCI_pdu->Num_ue_spec_dci--; DCI_pdu->Num_ue_spec_dci--;
} }
return(res);
} }
targets/ARCH/COMMON/common_lib.c
View file @ 66fe461b
...@@ -54,7 +54,6 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf ...@@ -54,7 +54,6 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
return(openair0_dev_init_exmimo(device, openair0_cfg)); return(openair0_dev_init_exmimo(device, openair0_cfg));
#elif OAI_USRP #elif OAI_USRP
device->type=USRP_B200_IF; device->type=USRP_B200_IF;
openair0_dev_init_usrp(device, openair0_cfg);
printf("openair0_dev_init_usrp ...\n"); printf("openair0_dev_init_usrp ...\n");
return(openair0_dev_init_usrp(device, openair0_cfg)); return(openair0_dev_init_usrp(device, openair0_cfg));
......
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ 66fe461b
...@@ -482,6 +482,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_ ...@@ -482,6 +482,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
} else { } else {
printf("Found USRP B200"); printf("Found USRP B200");
args += ",num_recv_frames=256" ;
s->usrp = uhd::usrp::multi_usrp::make(args); s->usrp = uhd::usrp::multi_usrp::make(args);
// s->usrp->set_rx_subdev_spec(rx_subdev); // s->usrp->set_rx_subdev_spec(rx_subdev);
......