In the configuration file, to enable measurements, add:

    enable_measurement_reports = "yes";

Note that if x2 is enabled then the option 'enable_measurement_reports'
is not taken into account and the measurements are enabled.

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

  -> slight increase on the ping RTT by 10 ms
  -> notification in the HTML report that CDRX was activated

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

  -- Only FDD for the moment

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

This commit introduces X2AP timers (t_reloc_prep, tx2_reloc_overall).
You need to set the values in the configuration file.

X2AP can be enabled or disabled in the configuration file too (disabled
by default).

Some deadcode was removed.

parameters for PRACH/PUCCH in configuration file. Default values are those used for Band 7. eMTC configuration file for eMTC changed to reflect modification made for Band 13 operation.

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

    also disabling LLL realtime issues as an error until PRACH allocation is fixed

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

For whatever reason most of the files had their permission
changed from 644 to 755, which is not wanted.

  -- Connection w/ basic simulator

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

  -- fix for IF4p5 TDD scenario (missing build test-case)
  -- added automatic UE/eNB termination in main.py when iperf/ping fails
     It allows to have a eNB log analysis for HTML reporting
  -- added statistics on PDCP out-of-resource messages
  -- added statistics on ULSCH error messages

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

    also adding TDD IF4p5 testing
    removing basic-sim TDD 5MHz DL iperf test

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

  --> currently only FDD 5MHz

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

This reverts commit d7441543.

  -> having 2 PLMN IDs in the table since UE seems to pick 2nd one

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

    also at eNB init, no sync will result into an error

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

  -- FDD
  -- basic simulator

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

  -- Configuration files for a Band-40 test setup
  -- XML file test on band-40 for 5 and 10 MHz in DL only

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

The configuration file has now to contain ENB_IPV4_ADDRESS_FOR_X2C and
ENB_PORT_FOR_X2C in the NETWORK_INTERFACES section.

For example:

    NETWORK_INTERFACES :
    {
        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152

        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
    };

 * adding merge request allow flag:
  -- if false no forced merge to develop
  -- if true and if branch is not develop, then forced merge to develop
 * lowered the ru gains in CI conf files
 * adding on-the-fly HTML summary within python main.py script
 * adding 20 MHz testcases to FDD band 7 scenario
 * adding GitLab status for
  -- centOS build
  -- FDD-band7 tests

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

  * added banner to pipeline script
  * added parameters to Jenkins pipeline / python
    * xmlfile and test stage
  * eNB configuration files are located under ci-scripts/conf_files
    * no more correction of MNC
    * still correction of EPC / eNB IP addresses at runtime
    * Initialize_eNB_args is back using the proper "-O " syntax
  * Terminate stage is parallel as in FJU's original pipeline
  * Log collection stage is back fully parallel
  * Console as artifact an option
  * Check if terminate calls ended well, to be repeated at the end
  * Adding back iperf:
    * selection of iperf vs iperf3
    * adding some iperf testcases to test suite
  * Better enb launch

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>