Newer
Older
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
# Python for CI of OAI-eNB + COTS-UE
#
# Required Python Version
# Python 3.x
#
# Required Python Package
# pexpect
#---------------------------------------------------------------------
#-----------------------------------------------------------
# Version
#-----------------------------------------------------------
Version = '0.1'
#-----------------------------------------------------------
# Constants
#-----------------------------------------------------------
ALL_PROCESSES_OK = 0
ENB_PROCESS_FAILED = -1
ENB_PROCESS_OK = +1
ENB_PROCESS_SEG_FAULT = -11
ENB_PROCESS_ASSERTION = -12
ENB_PROCESS_REALTIME_ISSUE = -13
Raphael Defosseux
committed
ENB_PROCESS_NOLOGFILE_TO_ANALYZE = -14
Raphael Defosseux
committed
ENB_PROCESS_SLAVE_RRU_NOT_SYNCED = -15
HSS_PROCESS_FAILED = -2
HSS_PROCESS_OK = +2
MME_PROCESS_FAILED = -3
MME_PROCESS_OK = +3
SPGW_PROCESS_FAILED = -4
SPGW_PROCESS_OK = +4
UE_IP_ADDRESS_ISSUE = -5
OAI_UE_PROCESS_NOLOGFILE_TO_ANALYZE = -20
OAI_UE_PROCESS_COULD_NOT_SYNC = -21
OAI_UE_PROCESS_ASSERTION = -22
OAI_UE_PROCESS_FAILED = -23
OAI_UE_PROCESS_NO_TUNNEL_INTERFACE = -24
#-----------------------------------------------------------
# Import
#-----------------------------------------------------------
import sys # arg
import re # reg
import pexpect # pexpect
import time # sleep
import os
import xml.etree.ElementTree as ET
import logging
import datetime
import signal
logging.basicConfig(
level=logging.DEBUG,
format="[%(asctime)s] %(name)s:%(levelname)s: %(message)s"
)
#-----------------------------------------------------------
# Class Declaration
#-----------------------------------------------------------
class SSHConnection():
def __init__(self):
self.ranRepository = ''
self.ranBranch = ''
self.ranAllowMerge = False
self.ranCommitID = ''
self.ranTargetBranch = ''
self.eNBIPAddress = ''
self.eNBUserName = ''
self.eNBPassword = ''
self.eNBSourceCodePath = ''
self.EPCIPAddress = ''
self.EPCUserName = ''
self.EPCPassword = ''
self.eNB1IPAddress = ''
self.eNB1UserName = ''
self.eNB1Password = ''
self.eNB1SourceCodePath = ''
self.eNB2IPAddress = ''
self.eNB2UserName = ''
self.eNB2Password = ''
self.eNB2SourceCodePath = ''
self.EPCSourceCodePath = ''
self.EPCType = ''
self.ADBIPAddress = ''
self.ADBUserName = ''
self.ADBPassword = ''
self.testCase_id = ''
self.testXMLfiles = []
self.nbTestXMLfiles = 0
self.desc = ''
self.Build_eNB_args = ''
self.backgroundBuild = False
self.backgroundBuildTestId = ['', '', '']
self.Initialize_eNB_args = ''
self.eNB_serverId = ''
Raphael Defosseux
committed
self.eNBLogFiles = ['', '', '']
self.eNBOptions = ['', '', '']
self.ping_args = ''
self.ping_packetloss_threshold = ''
self.iperf_args = ''
self.iperf_packetloss_threshold = ''
self.UEDevices = []
self.UEIPAddresses = []
self.htmlFile = ''
self.htmlHeaderCreated = False
self.htmlFooterCreated = False
self.htmlUEConnected = -1
self.htmleNBFailureMsg = ''
self.htmlUEFailureMsg = ''
self.picocom_closure = False
self.idle_sleep_time = 0
self.htmlTabRefs = []
self.htmlTabNames = []
self.htmlTabIcons = []
self.finalStatus = False
self.OsVersion = ''
self.KernelVersion = ''
self.UhdVersion = ''
self.UsrpBoard = ''
self.CpuNb = ''
self.CpuModel = ''
self.CpuMHz = ''
self.UEIPAddress = ''
self.UEUserName = ''
self.UEPassword = ''
self.UESourceCodePath = ''
self.Build_OAI_UE_args = ''
self.Initialize_OAI_UE_args = ''
self.flexranCtrlInstalled = False
self.flexranCtrlStarted = False
self.expectedNbOfConnectedUEs = 0
def open(self, ipaddress, username, password):
count = 0
connect_status = False
while count < 4:
self.ssh = pexpect.spawn('ssh', [username + '@' + ipaddress], timeout = 5)
self.sshresponse = self.ssh.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', 'Last login', pexpect.EOF, pexpect.TIMEOUT])
if self.sshresponse == 0:
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
self.ssh.sendline('yes')
self.ssh.expect('password:')
self.ssh.sendline(password)
self.sshresponse = self.ssh.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
if self.sshresponse == 0:
count = 10
connect_status = True
else:
logging.debug('self.sshresponse = ' + str(self.sshresponse))
elif self.sshresponse == 1:
self.ssh.sendline(password)
self.sshresponse = self.ssh.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
if self.sshresponse == 0:
count = 10
connect_status = True
else:
logging.debug('self.sshresponse = ' + str(self.sshresponse))
elif self.sshresponse == 2:
# Checking if we are really on the remote client defined by its IP address
self.command('stdbuf -o0 ifconfig | egrep --color=never "inet addr:"', '\$', 5)
result = re.search(str(ipaddress), str(self.ssh.before))
if result is None:
self.close()
else:
count = 10
connect_status = True
# debug output
logging.debug(str(self.ssh.before))
logging.debug('self.sshresponse = ' + str(self.sshresponse))
count += 1
if connect_status:
sys.exit('SSH Connection Failed')
def command(self, commandline, expectedline, timeout):
logging.debug(commandline)
self.ssh.timeout = timeout
self.ssh.sendline(commandline)
self.sshresponse = self.ssh.expect([expectedline, pexpect.EOF, pexpect.TIMEOUT])
if self.sshresponse == 0:
elif self.sshresponse == 1:
logging.debug('\u001B[1;37;41m Unexpected EOF \u001B[0m')
logging.debug('Expected Line : ' + expectedline)
sys.exit(self.sshresponse)
elif self.sshresponse == 2:
logging.debug('\u001B[1;37;41m Unexpected TIMEOUT \u001B[0m')
logging.debug('Expected Line : ' + expectedline)
result = re.search('ping |iperf |picocom', str(commandline))
logging.debug(str(self.ssh.before))
else:
logging.debug('\u001B[1;37;41m Unexpected Others \u001B[0m')
logging.debug('Expected Line : ' + expectedline)
sys.exit(self.sshresponse)
def close(self):
self.ssh.timeout = 5
self.ssh.sendline('exit')
self.sshresponse = self.ssh.expect([pexpect.EOF, pexpect.TIMEOUT])
if self.sshresponse == 0:
pass
elif self.sshresponse == 1:
if not self.picocom_closure:
logging.debug('\u001B[1;37;41m Unexpected TIMEOUT during closing\u001B[0m')
logging.debug('\u001B[1;37;41m Unexpected Others during closing\u001B[0m')
def copyin(self, ipaddress, username, password, source, destination):
count = 0
copy_status = False
logging.debug('scp '+ username + '@' + ipaddress + ':' + source + ' ' + destination)
Raphael Defosseux
committed
scp_spawn = pexpect.spawn('scp '+ username + '@' + ipaddress + ':' + source + ' ' + destination, timeout = 100)
scp_response = scp_spawn.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', pexpect.EOF, pexpect.TIMEOUT])
scp_spawn.sendline('yes')
scp_spawn.expect('password:')
scp_spawn.sendline(password)
scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
if scp_response == 0:
count = 10
copy_status = True
else:
logging.debug('1 - scp_response = ' + str(scp_response))
elif scp_response == 1:
scp_spawn.sendline(password)
scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
if scp_response == 0 or scp_response == 3:
count = 10
copy_status = True
else:
logging.debug('2 - scp_response = ' + str(scp_response))
elif scp_response == 2:
count = 10
copy_status = True
logging.debug('3 - scp_response = ' + str(scp_response))
# adding a tempo when failure
if not copy_status:
time.sleep(1)
count += 1
if copy_status:
Raphael Defosseux
committed
return 0
Raphael Defosseux
committed
return -1
def copyout(self, ipaddress, username, password, source, destination):
count = 0
copy_status = False
logging.debug('scp ' + source + ' ' + username + '@' + ipaddress + ':' + destination)
while count < 4:
Raphael Defosseux
committed
scp_spawn = pexpect.spawn('scp ' + source + ' ' + username + '@' + ipaddress + ':' + destination, timeout = 100)
scp_response = scp_spawn.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', pexpect.EOF, pexpect.TIMEOUT])
scp_spawn.sendline('yes')
scp_spawn.expect('password:')
scp_spawn.sendline(password)
scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
if scp_response == 0:
count = 10
copy_status = True
else:
logging.debug('1 - scp_response = ' + str(scp_response))
elif scp_response == 1:
scp_spawn.sendline(password)
scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
if scp_response == 0 or scp_response == 3:
count = 10
copy_status = True
else:
logging.debug('2 - scp_response = ' + str(scp_response))
elif scp_response == 2:
count = 10
copy_status = True
logging.debug('3 - scp_response = ' + str(scp_response))
# adding a tempo when failure
if not copy_status:
time.sleep(1)
count += 1
if copy_status:
pass
else:
sys.exit('SCP failed')
def BuildeNB(self):
if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
Usage()
sys.exit('Insufficient Parameter')
if self.eNB_serverId == '0':
lIpAddr = self.eNBIPAddress
lUserName = self.eNBUserName
lPassWord = self.eNBPassword
lSourcePath = self.eNBSourceCodePath
elif self.eNB_serverId == '1':
lIpAddr = self.eNB1IPAddress
lUserName = self.eNB1UserName
lPassWord = self.eNB1Password
lSourcePath = self.eNB1SourceCodePath
elif self.eNB_serverId == '2':
lIpAddr = self.eNB2IPAddress
lUserName = self.eNB2UserName
lPassWord = self.eNB2Password
lSourcePath = self.eNB2SourceCodePath
if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(lIpAddr, lUserName, lPassWord)
self.command('mkdir -p ' + lSourcePath, '\$', 5)
self.command('cd ' + lSourcePath, '\$', 5)
self.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + self.ranRepository + ' .; else stdbuf -o0 git fetch; fi', '\$', 600)
# Raphael: here add a check if git clone or git fetch went smoothly
self.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
self.command('git config user.name "OAI Jenkins"', '\$', 5)
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
# Checking the BUILD INFO file
if not self.backgroundBuild:
self.command('ls *.txt', '\$', 5)
result = re.search('LAST_BUILD_INFO', str(self.ssh.before))
if result is not None:
mismatch = False
self.command('grep SRC_COMMIT LAST_BUILD_INFO.txt', '\$', 2)
result = re.search(self.ranCommitID, str(self.ssh.before))
if result is None:
mismatch = True
self.command('grep MERGED_W_TGT_BRANCH LAST_BUILD_INFO.txt', '\$', 2)
if (self.ranAllowMerge):
result = re.search('YES', str(self.ssh.before))
if result is None:
mismatch = True
self.command('grep TGT_BRANCH LAST_BUILD_INFO.txt', '\$', 2)
if self.ranTargetBranch == '':
result = re.search('develop', str(self.ssh.before))
else:
result = re.search(self.ranTargetBranch, str(self.ssh.before))
if result is None:
mismatch = True
else:
result = re.search('NO', str(self.ssh.before))
if result is None:
mismatch = True
if not mismatch:
self.close()
self.CreateHtmlTestRow(self.Build_eNB_args, 'OK', ALL_PROCESSES_OK)
return
self.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
# if the commit ID is provided use it to point to it
if self.ranCommitID != '':
self.command('git checkout -f ' + self.ranCommitID, '\$', 5)
# if the branch is not develop, then it is a merge request and we need to do
# the potential merge. Note that merge conflicts should already been checked earlier
if (self.ranAllowMerge):
if self.ranTargetBranch == '':
if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
self.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
else:
logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
self.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
self.command('source oaienv', '\$', 5)
self.command('cd cmake_targets', '\$', 5)
self.command('mkdir -p log', '\$', 5)
self.command('chmod 777 log', '\$', 5)
# no need to remove in log (git clean did the trick)
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
if self.backgroundBuild:
self.command('echo "./build_oai ' + self.Build_eNB_args + '" > ./my-lte-softmodem-build.sh', '\$', 5)
self.command('chmod 775 ./my-lte-softmodem-build.sh', '\$', 5)
self.command('echo ' + lPassWord + ' | sudo -S -E daemon --inherit --unsafe --name=build_enb_daemon --chdir=' + lSourcePath + '/cmake_targets -o ' + lSourcePath + '/cmake_targets/compile_oai_enb.log ./my-lte-softmodem-build.sh', '\$', 5)
self.close()
self.CreateHtmlTestRow(self.Build_eNB_args, 'OK', ALL_PROCESSES_OK)
self.backgroundBuildTestId[int(self.eNB_instance)] = self.testCase_id
return
self.command('stdbuf -o0 ./build_oai ' + self.Build_eNB_args + ' 2>&1 | stdbuf -o0 tee compile_oai_enb.log', 'Bypassing the Tests|build have failed', 1500)
self.checkBuildeNB(lIpAddr, lUserName, lPassWord, lSourcePath, self.testCase_id)
def WaitBuildeNBisFinished(self):
if self.eNB_serverId == '0':
lIpAddr = self.eNBIPAddress
lUserName = self.eNBUserName
lPassWord = self.eNBPassword
lSourcePath = self.eNBSourceCodePath
elif self.eNB_serverId == '1':
lIpAddr = self.eNB1IPAddress
lUserName = self.eNB1UserName
lPassWord = self.eNB1Password
lSourcePath = self.eNB1SourceCodePath
elif self.eNB_serverId == '2':
lIpAddr = self.eNB2IPAddress
lUserName = self.eNB2UserName
lPassWord = self.eNB2Password
lSourcePath = self.eNB2SourceCodePath
if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(lIpAddr, lUserName, lPassWord)
count = 40
buildOAIprocess = True
while (count > 0) and buildOAIprocess:
self.command('ps aux | grep --color=never build_ | grep -v grep', '\$', 3)
result = re.search('build_oai', str(self.ssh.before))
if result is None:
buildOAIprocess = False
else:
count -= 1
time.sleep(30)
self.checkBuildeNB(lIpAddr, lUserName, lPassWord, lSourcePath, self.backgroundBuildTestId[int(self.eNB_instance)])
def checkBuildeNB(self, lIpAddr, lUserName, lPassWord, lSourcePath, testcaseId):
self.command('cd ' + lSourcePath + '/cmake_targets', '\$', 3)
self.command('ls lte_build_oai/build', '\$', 3)
self.command('ls lte_build_oai/build', '\$', 3)
buildStatus = True
result = re.search('lte-softmodem', str(self.ssh.before))
if result is None:
buildStatus = False
else:
# Generating a BUILD INFO file
self.command('echo "SRC_BRANCH: ' + self.ranBranch + '" > ../LAST_BUILD_INFO.txt', '\$', 2)
self.command('echo "SRC_COMMIT: ' + self.ranCommitID + '" >> ../LAST_BUILD_INFO.txt', '\$', 2)
if (self.ranAllowMerge):
self.command('echo "MERGED_W_TGT_BRANCH: YES" >> ../LAST_BUILD_INFO.txt', '\$', 2)
if self.ranTargetBranch == '':
self.command('echo "TGT_BRANCH: develop" > ../LAST_BUILD_INFO.txt', '\$', 2)
else:
self.command('echo "TGT_BRANCH: ' + self.ranBranch + '" > ../LAST_BUILD_INFO.txt', '\$', 2)
else:
self.command('echo "MERGED_W_TGT_BRANCH: NO" >> ../LAST_BUILD_INFO.txt', '\$', 2)
self.command('mkdir -p build_log_' + testcaseId, '\$', 5)
self.command('mv log/* ' + 'build_log_' + testcaseId, '\$', 5)
self.command('mv compile_oai_enb.log ' + 'build_log_' + testcaseId, '\$', 5)
if self.eNB_serverId != '0':
self.command('cd cmake_targets', '\$', 5)
self.command('if [ -e tmp_build' + testcaseId + '.zip ]; then rm -f tmp_build' + testcaseId + '.zip; fi', '\$', 5)
self.command('zip -r -qq tmp_build' + testcaseId + '.zip build_log_' + testcaseId, '\$', 5)
self.close()
if (os.path.isfile('./tmp_build' + testcaseId + '.zip')):
os.remove('./tmp_build' + testcaseId + '.zip')
self.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/tmp_build' + testcaseId + '.zip', '.')
if (os.path.isfile('./tmp_build' + testcaseId + '.zip')):
self.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './tmp_build' + testcaseId + '.zip', self.eNBSourceCodePath + '/cmake_targets/.')
os.remove('./tmp_build' + testcaseId + '.zip')
self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
self.command('cd ' + self.eNBSourceCodePath + '/cmake_targets', '\$', 5)
self.command('unzip -qq -DD tmp_build' + testcaseId + '.zip', '\$', 5)
self.command('rm -f tmp_build' + testcaseId + '.zip', '\$', 5)
self.close()
else:
self.close()
if buildStatus:
self.CreateHtmlTestRow(self.Build_eNB_args, 'OK', ALL_PROCESSES_OK)
else:
logging.error('\u001B[1m Building OAI eNB Failed\u001B[0m')
self.CreateHtmlTestRow(self.Build_eNB_args, 'KO', ALL_PROCESSES_OK)
self.CreateHtmlTabFooter(False)
sys.exit(1)
if self.UEIPAddress == '' or self.ranRepository == '' or self.ranBranch == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
Boris Djalal
committed
self.command('mkdir -p ' + self.UESourceCodePath, '\$', 5)
self.command('cd ' + self.UESourceCodePath, '\$', 5)
self.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + self.ranRepository + ' .; else stdbuf -o0 git fetch; fi', '\$', 600)
Boris Djalal
committed
# here add a check if git clone or git fetch went smoothly
self.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
self.command('git config user.name "OAI Jenkins"', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S git clean -x -d -ff', '\$', 30)
# if the commit ID is provided use it to point to it
if self.ranCommitID != '':
self.command('git checkout -f ' + self.ranCommitID, '\$', 5)
Boris Djalal
committed
# if the branch is not develop, then it is a merge request and we need to do
# the potential merge. Note that merge conflicts should already been checked earlier
if (self.ranAllowMerge):
if self.ranTargetBranch == '':
if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
Boris Djalal
committed
self.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
else:
logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
self.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
Boris Djalal
committed
self.command('source oaienv', '\$', 5)
self.command('cd cmake_targets', '\$', 5)
self.command('mkdir -p log', '\$', 5)
self.command('chmod 777 log', '\$', 5)
# no need to remove in log (git clean did the trick)
self.command('stdbuf -o0 ./build_oai ' + self.Build_OAI_UE_args + ' 2>&1 | stdbuf -o0 tee compile_oai_ue.log', 'Bypassing the Tests|build have failed', 600)
self.command('ls lte_build_oai/build', '\$', 3)
self.command('ls lte_build_oai/build', '\$', 3)
buildStatus = True
result = re.search('lte-uesoftmodem', str(self.ssh.before))
if result is None:
buildStatus = False
Boris Djalal
committed
self.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
self.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
self.command('mv compile_oai_ue.log ' + 'build_log_' + self.testCase_id, '\$', 5)
self.close()
if buildStatus:
self.CreateHtmlTestRow(self.Build_OAI_UE_args, 'OK', ALL_PROCESSES_OK, 'OAI UE')
else:
logging.error('\u001B[1m Building OAI UE Failed\u001B[0m')
self.CreateHtmlTestRow(self.Build_OAI_UE_args, 'KO', ALL_PROCESSES_OK, 'OAI UE')
self.CreateHtmlTabFooter(False)
sys.exit(1)
def InitializeHSS(self):
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
if re.match('OAI', self.EPCType, re.IGNORECASE):
logging.debug('Using the OAI EPC HSS')
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('source oaienv', '\$', 5)
self.command('cd scripts', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_hss 2>&1 | stdbuf -o0 awk \'{ print strftime("[%Y/%m/%d %H:%M:%S] ",systime()) $0 }\' | stdbuf -o0 tee -a hss_' + self.testCase_id + '.log &', 'Core state: 2 -> 3', 35)
else:
logging.debug('Using the ltebox simulated HSS')
self.command('if [ -d ' + self.EPCSourceCodePath + '/scripts ]; then echo ' + self.eNBPassword + ' | sudo -S rm -Rf ' + self.EPCSourceCodePath + '/scripts ; fi', '\$', 5)
self.command('mkdir -p ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
self.command('cd /opt/hss_sim0609', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f hss.log daemon.log', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S echo "Starting sudo session" && sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real ', '\$', 5)
self.close()
self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)
def InitializeMME(self):
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('source oaienv', '\$', 5)
self.command('cd scripts', '\$', 5)
self.command('stdbuf -o0 hostname', '\$', 5)
result = re.search('hostname\\\\r\\\\n(?P<host_name>[a-zA-Z0-9\-\_]+)\\\\r\\\\n', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m Hostname Not Found! \u001B[0m')
sys.exit(1)
host_name = result.group('host_name')
self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_mme 2>&1 | stdbuf -o0 tee -a mme_' + self.testCase_id + '.log &', 'MME app initialization complete', 100)
self.command('cd /opt/ltebox/tools', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S ./start_mme', '\$', 5)
self.close()
self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)
def InitializeSPGW(self):
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('source oaienv', '\$', 5)
self.command('cd scripts', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_spgw 2>&1 | stdbuf -o0 tee -a spgw_' + self.testCase_id + '.log &', 'Initializing SPGW-APP task interface: DONE', 30)
self.command('cd /opt/ltebox/tools', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S ./start_xGw', '\$', 5)
self.close()
self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
def CheckFlexranCtrlInstallation(self):
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '':
return
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('ls -ls /opt/flexran_rtc/*/rt_controller', '\$', 5)
result = re.search('/opt/flexran_rtc/build/rt_controller', str(self.ssh.before))
if result is not None:
self.flexranCtrlInstalled = True
logging.debug('Flexran Controller is installed')
self.close()
def InitializeFlexranCtrl(self):
if self.flexranCtrlInstalled == False:
return
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd /opt/flexran_rtc', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f log/*.log', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S echo "build/rt_controller -c log_config/basic_log" > ./my-flexran-ctl.sh', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S chmod 755 ./my-flexran-ctl.sh', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S daemon --unsafe --name=flexran_rtc_daemon --chdir=/opt/flexran_rtc -o /opt/flexran_rtc/log/flexranctl_' + self.testCase_id + '.log ././my-flexran-ctl.sh', '\$', 5)
self.command('ps -aux | grep --color=never rt_controller', '\$', 5)
result = re.search('rt_controller -c ', str(self.ssh.before))
if result is not None:
logging.debug('\u001B[1m Initialize FlexRan Controller Completed\u001B[0m')
self.flexranCtrlStarted = True
self.close()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def InitializeeNB(self):
Raphael Defosseux
committed
if self.eNB_serverId == '0':
lIpAddr = self.eNBIPAddress
lUserName = self.eNBUserName
lPassWord = self.eNBPassword
lSourcePath = self.eNBSourceCodePath
elif self.eNB_serverId == '1':
lIpAddr = self.eNB1IPAddress
lUserName = self.eNB1UserName
lPassWord = self.eNB1Password
lSourcePath = self.eNB1SourceCodePath
elif self.eNB_serverId == '2':
lIpAddr = self.eNB2IPAddress
lUserName = self.eNB2UserName
lPassWord = self.eNB2Password
lSourcePath = self.eNB2SourceCodePath
if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
Usage()
sys.exit('Insufficient Parameter')
check_eNB = False
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow(self.Initialize_eNB_args, 'KO', pStatus)
self.CreateHtmlTabFooter(False)
sys.exit(1)
# If tracer options is on, running tshark on EPC side and capture traffic b/ EPC and eNB
result = re.search('T_stdout', str(self.Initialize_eNB_args))
if result is not None:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('ip addr show | awk -f /tmp/active_net_interfaces.awk | egrep -v "lo|tun"', '\$', 5)
result = re.search('interfaceToUse=(?P<eth_interface>[a-zA-Z0-9\-\_]+)done', str(self.ssh.before))
if result is not None:
eth_interface = result.group('eth_interface')
logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + '\u001B[0m')
self.EPC_PcapFileName = 'enb_' + self.testCase_id + '_s1log.pcap'
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f /tmp/' + self.EPC_PcapFileName, '\$', 5)
Raphael Defosseux
committed
self.command('echo $USER; nohup sudo tshark -f "host ' + lIpAddr +'" -i ' + eth_interface + ' -w /tmp/' + self.EPC_PcapFileName + ' > /tmp/tshark.log 2>&1 &', self.EPCUserName, 5)
Raphael Defosseux
committed
self.open(lIpAddr, lUserName, lPassWord)
self.command('cd ' + lSourcePath, '\$', 5)
# Initialize_eNB_args usually start with -O and followed by the location in repository
full_config_file = self.Initialize_eNB_args.replace('-O ','')
extra_options = ''
extIdx = full_config_file.find('.conf')
if (extIdx > 0):
extra_options = full_config_file[extIdx + 5:]
# if tracer options is on, compiling and running T Tracer
result = re.search('T_stdout', str(extra_options))
if result is not None:
logging.debug('\u001B[1m Compiling and launching T Tracer\u001B[0m')
self.command('cd common/utils/T/tracer', '\$', 5)
self.command('make', '\$', 10)
Raphael Defosseux
committed
self.command('echo $USER; nohup ./record -d ../T_messages.txt -o ' + lSourcePath + '/cmake_targets/enb_' + self.testCase_id + '_record.raw -ON -off VCD -off HEAVY -off LEGACY_GROUP_TRACE -off LEGACY_GROUP_DEBUG > ' + lSourcePath + '/cmake_targets/enb_' + self.testCase_id + '_record.log 2>&1 &', lUserName, 5)
self.command('cd ' + lSourcePath, '\$', 5)
full_config_file = full_config_file[:extIdx + 5]
config_path, config_file = os.path.split(full_config_file)
else:
sys.exit('Insufficient Parameter')
ci_full_config_file = config_path + '/ci-' + config_file
Raphael Defosseux
committed
result = re.search('^rru|^rcc|^du.band', str(config_file))
if result is not None:
rruCheck = True
Raphael Defosseux
committed
result = re.search('^rru|^enb|^du.band', str(config_file))
Raphael Defosseux
committed
self.command('echo ' + lPassWord + ' | sudo -S uhd_find_devices', '\$', 10)
result = re.search('type: b200', str(self.ssh.before))
if result is not None:
logging.debug('Found a B2xx device --> resetting it')
Raphael Defosseux
committed
self.command('echo ' + lPassWord + ' | sudo -S b2xx_fx3_utils --reset-device', '\$', 10)
Raphael Defosseux
committed
self.command('echo ' + lPassWord + ' | sudo -S uhd_find_devices', '\$', 15)
# Make a copy and adapt to EPC / eNB IP addresses
self.command('cp ' + full_config_file + ' ' + ci_full_config_file, '\$', 5)
self.command('sed -i -e \'s/CI_MME_IP_ADDR/' + self.EPCIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
Raphael Defosseux
committed
self.command('sed -i -e \'s/CI_ENB_IP_ADDR/' + lIpAddr + '/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/CI_RCC_IP_ADDR/' + self.eNBIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/CI_RRU1_IP_ADDR/' + self.eNB1IPAddress + '/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/CI_RRU2_IP_ADDR/' + self.eNB2IPAddress + '/\' ' + ci_full_config_file, '\$', 2);
Raphael Defosseux
committed
if self.flexranCtrlInstalled and self.flexranCtrlStarted:
self.command('sed -i -e \'s/FLEXRAN_ENABLED.*;/FLEXRAN_ENABLED = "yes";/\' ' + ci_full_config_file, '\$', 2);
else:
self.command('sed -i -e \'s/FLEXRAN_ENABLED.*;/FLEXRAN_ENABLED = "no";/\' ' + ci_full_config_file, '\$', 2);
# Launch eNB with the modified config file
self.command('source oaienv', '\$', 5)
self.command('cd cmake_targets', '\$', 5)
Raphael Defosseux
committed
self.command('echo "ulimit -c unlimited && ./lte_build_oai/build/lte-softmodem -O ' + lSourcePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5)
self.command('chmod 775 ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5)
Raphael Defosseux
committed
self.command('echo ' + lPassWord + ' | sudo -S rm -Rf enb_' + self.testCase_id + '.log', '\$', 5)
self.command('echo ' + lPassWord + ' | sudo -S -E daemon --inherit --unsafe --name=enb' + str(self.eNB_instance) + '_daemon --chdir=' + lSourcePath + '/cmake_targets -o ' + lSourcePath + '/cmake_targets/enb_' + self.testCase_id + '.log ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5)
self.eNBLogFiles[int(self.eNB_instance)] = 'enb_' + self.testCase_id + '.log'
if extra_options != '':
self.eNBOptions[int(self.eNB_instance)] = extra_options
time.sleep(6)
doLoop = True
loopCounter = 10
while (doLoop):
loopCounter = loopCounter - 1
if (loopCounter == 0):
# In case of T tracer recording, we may need to kill it
result = re.search('T_stdout', str(self.Initialize_eNB_args))
if result is not None:
self.command('killall --signal SIGKILL record', '\$', 5)
self.close()
logging.error('\u001B[1;37;41m eNB logging system did not show got sync! \u001B[0m')
self.CreateHtmlTestRow('-O ' + config_file + extra_options, 'KO', ALL_PROCESSES_OK)
self.CreateHtmlTabFooter(False)
# In case of T tracer recording, we need to kill tshark on EPC side
result = re.search('T_stdout', str(self.Initialize_eNB_args))
if result is not None:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
logging.debug('\u001B[1m Stopping tshark \u001B[0m')
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
if self.EPC_PcapFileName != '':
self.command('echo ' + self.EPCPassword + ' | sudo -S chmod 666 /tmp/' + self.EPC_PcapFileName, '\$', 5)
if self.EPC_PcapFileName != '':
copyin_res = self.copyin(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, '/tmp/' + self.EPC_PcapFileName, '.')
if (copyin_res == 0):
Raphael Defosseux
committed
self.copyout(lIpAddr, lUserName, lPassWord, self.EPC_PcapFileName, lSourcePath + '/cmake_targets/.')
self.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting"', '\$', 4)
if rruCheck:
result = re.search('wait RUs', str(self.ssh.before))
else:
result = re.search('got sync|Starting F1AP at CU', str(self.ssh.before))
if result is None:
time.sleep(6)
else:
doLoop = False
self.CreateHtmlTestRow('-O ' + config_file + extra_options, 'OK', ALL_PROCESSES_OK)
logging.debug('\u001B[1m Initialize eNB Completed\u001B[0m')
time.sleep(10)
self.close()
def InitializeUE_common(self, device_id):
logging.debug('send adb commands')
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
Raphael Defosseux
committed
# enable data service
self.command('stdbuf -o0 adb -s ' + device_id + ' shell svc data enable', '\$', 60)
# The following commands are deprecated since we no longer work on Android 7+
# self.command('stdbuf -o0 adb -s ' + device_id + ' shell settings put global airplane_mode_on 1', '\$', 10)
# self.command('stdbuf -o0 adb -s ' + device_id + ' shell am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true', '\$', 60)
# a dedicated script has to be installed inside the UE
# airplane mode on means call /data/local/tmp/off
self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
#airplane mode off means call /data/local/tmp/on
logging.debug('\u001B[1mUE (' + device_id + ') Initialize Completed\u001B[0m')
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def InitializeUE(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
multi_jobs = []
for device_id in self.UEDevices:
p = Process(target = self.InitializeUE_common, args = (device_id,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def InitializeOAIUE(self):
if self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
result = re.search('--no-L2-connect', str(self.Initialize_OAI_UE_args))
if result is None:
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow(self.Initialize_OAI_UE_args, 'KO', pStatus)
self.CreateHtmlTabFooter(False)
sys.exit(1)
Boris Djalal
committed
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
# b2xx_fx3_utils reset procedure
self.command('echo ' + self.UEPassword + ' | sudo -S uhd_find_devices', '\$', 10)
result = re.search('type: b200', str(self.ssh.before))
if result is not None:
logging.debug('Found a B2xx device --> resetting it')
self.command('echo ' + self.UEPassword + ' | sudo -S b2xx_fx3_utils --reset-device', '\$', 10)
# Reloading FGPA bin firmware
self.command('echo ' + self.UEPassword + ' | sudo -S uhd_find_devices', '\$', 15)
logging.debug('Did not find any B2xx device')
Boris Djalal
committed
self.command('cd ' + self.UESourceCodePath, '\$', 5)
self.command('cd cmake_targets/lte_build_oai/build', '\$', 5)
result = re.search('--no-L2-connect', str(self.Initialize_OAI_UE_args))
# We may have to regenerate the .u* files
if result is None:
self.command('sed -e "s#93#92#" -e "s#8baf473f2f8fd09487cccbd7097c6862#fec86ba6eb707ed08905757b1bb44b8f#" -e "s#e734f8734007d6c5ce7a0508809e7e9c#C42449363BBAD02B66D16BC975D77CC1#" ../../../openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf > ../../../openair3/NAS/TOOLS/ci-ue_eurecom_test_sfr.conf', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S rm -Rf .u*', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S ../../../targets/bin/conf2uedata -c ../../../openair3/NAS/TOOLS/ci-ue_eurecom_test_sfr.conf -o .', '\$', 5)
# Launch UE with the modified config file
self.command('echo "ulimit -c unlimited && ./lte-uesoftmodem ' + self.Initialize_OAI_UE_args + '" > ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
self.command('chmod 775 ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
self.UELogFile = 'ue_' + self.testCase_id + '.log'
# We are now looping several times to hope we really sync w/ an eNB
doOutterLoop = True
outterLoopCounter = 5
gotSyncStatus = True
fullSyncStatus = True
while (doOutterLoop):
self.command('cd ' + self.UESourceCodePath + '/cmake_targets/lte_build_oai/build', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S rm -Rf ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '.log', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S -E daemon --inherit --unsafe --name=ue' + str(self.UE_instance) + '_daemon --chdir=' + self.UESourceCodePath + '/cmake_targets/lte_build_oai/build -o ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '.log ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
time.sleep(6)
self.command('cd ../..', '\$', 5)
doLoop = True
loopCounter = 10
gotSyncStatus = True
# the 'got sync' message is for the UE threads synchronization
while (doLoop):
loopCounter = loopCounter - 1
if (loopCounter == 0):
# Here should never occur
logging.error('"got sync" message never showed!')
gotSyncStatus = False
doLoop = False
continue
self.command('stdbuf -o0 cat ue_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync"', '\$', 4)
result = re.search('got sync', str(self.ssh.before))
if result is None:
time.sleep(6)
else:
doLoop = False
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
logging.debug('Found "got sync" message!')
if gotSyncStatus == False:
# we certainly need to stop the lte-uesoftmodem process if it is still running!
self.command('ps -aux | grep --text --color=never softmodem | grep -v grep', '\$', 4)
result = re.search('lte-uesoftmodem', str(self.ssh.before))
if result is not None:
self.command('echo ' + self.UEPassword + ' | sudo -S killall --signal=SIGINT lte-uesoftmodem', '\$', 4)
time.sleep(3)
# We are now checking if sync w/ eNB DOES NOT OCCUR
# Usually during the cell synchronization stage, the UE returns with No cell synchronization message
doLoop = True
loopCounter = 10
while (doLoop):
loopCounter = loopCounter - 1
if (loopCounter == 0):
# Here we do have a great chance that the UE did cell-sync w/ eNB
doLoop = False
doOutterLoop = False
fullSyncStatus = True
continue
self.command('stdbuf -o0 cat ue_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync"', '\$', 4)
result = re.search('No cell synchronization found', str(self.ssh.before))
if result is None:
time.sleep(6)
else:
doLoop = False
fullSyncStatus = False
logging.debug('Found: "No cell synchronization" message! --> try again')
time.sleep(6)
self.command('ps -aux | grep --text --color=never softmodem | grep -v grep', '\$', 4)
result = re.search('lte-uesoftmodem', str(self.ssh.before))
if result is not None:
self.command('echo ' + self.UEPassword + ' | sudo -S killall --signal=SIGINT lte-uesoftmodem', '\$', 4)
outterLoopCounter = outterLoopCounter - 1
if (outterLoopCounter == 0):
doOutterLoop = False
if fullSyncStatus and gotSyncStatus:
result = re.search('--no-L2-connect', str(self.Initialize_OAI_UE_args))
if result is None:
self.command('ifconfig oaitun_ue1', '\$', 4)
result = re.search('inet addr', str(self.ssh.before))
if result is not None:
logging.debug('\u001B[1m oaitun_ue1 interface is mounted and configured\u001B[0m')
tunnelInterfaceStatus = True
else:
logging.error('\u001B[1m oaitun_ue1 interface is either NOT mounted or NOT configured\u001B[0m')
tunnelInterfaceStatus = False
else:
tunnelInterfaceStatus = True
if fullSyncStatus and gotSyncStatus and tunnelInterfaceStatus:
self.CreateHtmlTestRow(self.Initialize_OAI_UE_args, 'OK', ALL_PROCESSES_OK, 'OAI UE')
logging.debug('\u001B[1m Initialize OAI UE Completed\u001B[0m')
else:
self.htmlUEFailureMsg = 'oaitun_ue1 interface is either NOT mounted or NOT configured'
self.CreateHtmlTestRow(self.Initialize_OAI_UE_args, 'KO', OAI_UE_PROCESS_NO_TUNNEL_INTERFACE, 'OAI UE')
logging.error('\033[91mInitialize OAI UE Failed! \033[0m')
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
def checkDevTTYisUnlocked(self):
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
count = 0
while count < 5:
self.command('echo ' + self.ADBPassword + ' | sudo -S lsof | grep ttyUSB0', '\$', 10)
result = re.search('picocom', str(self.ssh.before))
if result is None:
count = 10
else:
time.sleep(5)
count = count + 1
self.close()
def InitializeCatM(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
self.picocom_closure = True
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
time.sleep(1)
# Calling twice AT to clear all buffers
self.command('AT', 'OK|ERROR', 5)
self.command('AT', 'OK', 5)
# Disabling the Radio
self.command('AT+CFUN=0', 'OK', 5)
logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
# Checking if auto-attach is enabled
self.command('AT^AUTOATT?', 'OK', 5)
result = re.search('AUTOATT: (?P<state>[0-9\-]+)', str(self.ssh.before))
if result is not None:
if result.group('state') is not None:
autoAttachState = int(result.group('state'))
if autoAttachState is not None:
if autoAttachState == 0:
self.command('AT^AUTOATT=1', 'OK', 5)
logging.debug('\u001B[1m Auto-Attach enabled\u001B[0m')
else:
logging.debug('\u001B[1;37;41m Could not check Auto-Attach! \u001B[0m')
# Force closure of picocom but device might still be locked
self.close()
self.picocom_closure = False
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
self.checkDevTTYisUnlocked()
def TerminateCatM(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
self.picocom_closure = True
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
time.sleep(1)
# Calling twice AT to clear all buffers
self.command('AT', 'OK|ERROR', 5)
self.command('AT', 'OK', 5)
# Disabling the Radio
self.command('AT+CFUN=0', 'OK', 5)
logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
self.close()
self.picocom_closure = False
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
self.checkDevTTYisUnlocked()
def AttachCatM(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
self.picocom_closure = True
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
time.sleep(1)
# Calling twice AT to clear all buffers
self.command('AT', 'OK|ERROR', 5)
self.command('AT', 'OK', 5)
# Enabling the Radio
self.command('AT+CFUN=1', 'SIMSTORE,READY', 5)
logging.debug('\u001B[1m Cellular Functionality enabled\u001B[0m')
time.sleep(4)
# We should check if we register
count = 0
attach_cnt = 0
attach_status = False
while count < 5:
self.command('AT+CEREG?', 'OK', 5)
result = re.search('CEREG: 2,(?P<state>[0-9\-]+),', str(self.ssh.before))
if result is not None:
mDataConnectionState = int(result.group('state'))
if mDataConnectionState is not None:
if mDataConnectionState == 1:
count = 10
attach_status = True
result = re.search('CEREG: 2,1,"(?P<networky>[0-9A-Z]+)","(?P<networkz>[0-9A-Z]+)"', str(self.ssh.before))
if result is not None:
networky = result.group('networky')
networkz = result.group('networkz')
logging.debug('\u001B[1m CAT-M module attached to eNB (' + str(networky) + '/' + str(networkz) + ')\u001B[0m')
else:
logging.debug('\u001B[1m CAT-M module attached to eNB\u001B[0m')
else:
logging.debug('+CEREG: 2,' + str(mDataConnectionState))
attach_cnt = attach_cnt + 1
else:
logging.debug(str(self.ssh.before))
count = count + 1
time.sleep(1)
if attach_status:
self.command('AT+CESQ', 'OK', 5)
result = re.search('CESQ: 99,99,255,255,(?P<rsrq>[0-9]+),(?P<rsrp>[0-9]+)', str(self.ssh.before))
if result is not None:
nRSRQ = int(result.group('rsrq'))
nRSRP = int(result.group('rsrp'))
if (nRSRQ is not None) and (nRSRP is not None):
logging.debug(' RSRQ = ' + str(-20+(nRSRQ/2)) + ' dB')
logging.debug(' RSRP = ' + str(-140+nRSRP) + ' dBm')
self.close()
self.picocom_closure = False
self.checkDevTTYisUnlocked()
html_cell = '<pre style="background-color:white">CAT-M module\nAttachment Completed in ' + str(attach_cnt+4) + ' seconds'
if (nRSRQ is not None) and (nRSRP is not None):
html_cell += '\n RSRQ = ' + str(-20+(nRSRQ/2)) + ' dB'
html_cell += '\n RSRP = ' + str(-140+nRSRP) + ' dBm</pre>'
else:
html_cell += '</pre>'
html_queue.put(html_cell)
self.CreateHtmlTestRowQueue('N/A', 'OK', 1, html_queue)
else:
html_cell = '<pre style="background-color:white">CAT-M module\nAttachment Failed</pre>'
html_queue.put(html_cell)
self.CreateHtmlTestRowQueue('N/A', 'KO', 1, html_queue)
def PingCatM(self):
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
if (pStatus < 0):
self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
self.CreateHtmlTabFooter(False)
sys.exit(1)
try:
statusQueue = SimpleQueue()
lock = Lock()
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
if re.match('OAI', self.EPCType, re.IGNORECASE):
logging.debug('Using the OAI EPC HSS: not implemented yet')
self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
self.CreateHtmlTabFooter(False)
sys.exit(1)
else:
self.command('egrep --color=never "Allocated ipv4 addr" /opt/ltebox/var/log/xGwLog.0', '\$', 5)
result = re.search('Allocated ipv4 addr: (?P<ipaddr>[0-9\.]+) from Pool', str(self.ssh.before))
if result is not None:
moduleIPAddr = result.group('ipaddr')
else:
return
ping_time = re.findall("-c (\d+)",str(self.ping_args))
device_id = 'catm'
ping_status = self.command('stdbuf -o0 ping ' + self.ping_args + ' ' + str(moduleIPAddr) + ' 2>&1 | stdbuf -o0 tee ping_' + self.testCase_id + '_' + device_id + '.log', '\$', int(ping_time[0])*1.5)
# TIMEOUT CASE
if ping_status < 0:
message = 'Ping with UE (' + str(moduleIPAddr) + ') crashed due to TIMEOUT!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', str(self.ssh.before))
if result is None:
message = 'Packet Loss Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
packetloss = result.group('packetloss')
if float(packetloss) == 100:
message = 'Packet Loss is 100%'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', str(self.ssh.before))
if result is None:
message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
return
rtt_min = result.group('rtt_min')
rtt_avg = result.group('rtt_avg')
rtt_max = result.group('rtt_max')
pal_msg = 'Packet Loss : ' + packetloss + '%'
min_msg = 'RTT(Min) : ' + rtt_min + ' ms'
avg_msg = 'RTT(Avg) : ' + rtt_avg + ' ms'
max_msg = 'RTT(Max) : ' + rtt_max + ' ms'
lock.acquire()
logging.debug('\u001B[1;37;44m ping result (' + moduleIPAddr + ') \u001B[0m')
logging.debug('\u001B[1;34m ' + pal_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + min_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + avg_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + max_msg + '\u001B[0m')
qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
packetLossOK = True
if packetloss is not None:
if float(packetloss) > float(self.ping_packetloss_threshold):
qMsg += '\nPacket Loss too high'
logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
packetLossOK = False
elif float(packetloss) > 0:
qMsg += '\nPacket Loss is not 0%'
logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
lock.release()
self.close()
html_cell = '<pre style="background-color:white">CAT-M module\nIP Address : ' + moduleIPAddr + '\n' + qMsg + '</pre>'
statusQueue.put(html_cell)
if (packetLossOK):
self.CreateHtmlTestRowQueue(self.ping_args, 'OK', 1, statusQueue)
else:
self.CreateHtmlTestRowQueue(self.ping_args, 'KO', 1, statusQueue)
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
except:
os.kill(os.getppid(),signal.SIGUSR1)
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
time.sleep(2)
while count > 0:
self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
lock.acquire()
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put('mDataConnectionState Not Found!')
lock.release()
break
mDataConnectionState = int(result.group('state'))
if mDataConnectionState == 2:
logging.debug('\u001B[1mUE (' + device_id + ') Attach Completed\u001B[0m')
lock.acquire()
statusQueue.put(max_count - count)
statusQueue.put(device_id)
statusQueue.put('Attach Completed')
lock.release()
break
count = count - 1
if count == 15 or count == 30:
logging.debug('\u001B[1;30;43m Retry UE (' + device_id + ') Flight Mode Off \u001B[0m')
self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
time.sleep(0.5)
self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
time.sleep(0.5)
logging.debug('\u001B[1mWait UE (' + device_id + ') a second until mDataConnectionState=2 (' + str(max_count-count) + ' times)\u001B[0m')
time.sleep(1)
if count == 0:
logging.debug('\u001B[1;37;41m UE (' + device_id + ') Attach Failed \u001B[0m')
lock.acquire()
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put('Attach Failed')
lock.release()
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def AttachUE(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow('N/A', 'KO', pStatus)
self.CreateHtmlTabFooter(False)
for device_id in self.UEDevices:
if (self.nbMaxUEtoAttach == -1) or (nb_ue_to_connect < self.nbMaxUEtoAttach):
p = Process(target = self.AttachUE_common, args = (device_id, status_queue, lock,))
p.daemon = True
p.start()
multi_jobs.append(p)
nb_ue_to_connect = nb_ue_to_connect + 1
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow('N/A', 'KO', ALL_PROCESSES_OK)
self.CreateHtmlTabFooter(False)
sys.exit(1)
else:
attach_status = True
html_queue = SimpleQueue()
while (not status_queue.empty()):
count = status_queue.get()
if (count < 0):
attach_status = False
device_id = status_queue.get()
message = status_queue.get()
if (count < 0):
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + '</pre>'
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + ' in ' + str(count + 2) + ' seconds</pre>'
html_queue.put(html_cell)
if (attach_status):
self.CreateHtmlTestRowQueue('N/A', 'OK', len(self.UEDevices), html_queue)
result = re.search('T_stdout', str(self.Initialize_eNB_args))
if result is not None:
logging.debug('Waiting 5 seconds to fill up record file')
time.sleep(5)
else:
self.CreateHtmlTestRowQueue('N/A', 'KO', len(self.UEDevices), html_queue)
self.CreateHtmlTabFooter(False)
def DetachUE_common(self, device_id):
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
logging.debug('\u001B[1mUE (' + device_id + ') Detach Completed\u001B[0m')
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def DetachUE(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow('N/A', 'KO', pStatus)
self.CreateHtmlTabFooter(False)
multi_jobs = []
for device_id in self.UEDevices:
p = Process(target = self.DetachUE_common, args = (device_id,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
result = re.search('T_stdout', str(self.Initialize_eNB_args))
if result is not None:
logging.debug('Waiting 5 seconds to fill up record file')
time.sleep(5)
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
def RebootUE_common(self, device_id):
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
previousmDataConnectionStates = []
# Save mDataConnectionState
self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
sys.exit(1)
previousmDataConnectionStates.append(int(result.group('state')))
# Reboot UE
self.command('stdbuf -o0 adb -s ' + device_id + ' shell reboot', '\$', 10)
time.sleep(60)
previousmDataConnectionState = previousmDataConnectionStates.pop(0)
count = 180
while count > 0:
count = count - 1
self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
if result is None:
mDataConnectionState = None
else:
mDataConnectionState = int(result.group('state'))
logging.debug('mDataConnectionState = ' + result.group('state'))
if mDataConnectionState is None or (previousmDataConnectionState == 2 and mDataConnectionState != 2):
logging.debug('\u001B[1mWait UE (' + device_id + ') a second until reboot completion (' + str(180-count) + ' times)\u001B[0m')
time.sleep(1)
else:
logging.debug('\u001B[1mUE (' + device_id + ') Reboot Completed\u001B[0m')
break
if count == 0:
logging.debug('\u001B[1;37;41m UE (' + device_id + ') Reboot Failed \u001B[0m')
sys.exit(1)
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def RebootUE(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow('N/A', 'KO', pStatus)
self.CreateHtmlTabFooter(False)
multi_jobs = []
for device_id in self.UEDevices:
p = Process(target = self.RebootUE_common, args = (device_id,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
Raphael Defosseux
committed
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
def DataDisableUE_common(self, device_id):
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# enable data service
self.command('stdbuf -o0 adb -s ' + device_id + ' shell svc data disable', '\$', 60)
logging.debug('\u001B[1mUE (' + device_id + ') Disabled Data Service\u001B[0m')
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def DataDisableUE(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
multi_jobs = []
for device_id in self.UEDevices:
p = Process(target = self.DataDisableUE_common, args = (device_id,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def DataEnableUE_common(self, device_id):
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# enable data service
self.command('stdbuf -o0 adb -s ' + device_id + ' shell svc data enable', '\$', 60)
logging.debug('\u001B[1mUE (' + device_id + ') Enabled Data Service\u001B[0m')
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def DataEnableUE(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
multi_jobs = []
for device_id in self.UEDevices:
p = Process(target = self.DataEnableUE_common, args = (device_id,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def GetAllUEDevices(self, terminate_ue_flag):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
self.command('adb devices', '\$', 15)
self.UEDevices = re.findall("\\\\r\\\\n([A-Za-z0-9]+)\\\\tdevice",str(self.ssh.before))
if terminate_ue_flag == False:
if len(self.UEDevices) == 0:
logging.debug('\u001B[1;37;41m UE Not Found! \u001B[0m')
sys.exit(1)
self.close()
def GetAllCatMDevices(self, terminate_ue_flag):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
self.command('lsusb | egrep "Future Technology Devices International, Ltd FT2232C" | sed -e "s#:.*##" -e "s# #_#g"', '\$', 15)
self.CatMDevices = re.findall("\\\\r\\\\n([A-Za-z0-9_]+)",str(self.ssh.before))
if terminate_ue_flag == False:
if len(self.CatMDevices) == 0:
logging.debug('\u001B[1;37;41m CAT-M UE Not Found! \u001B[0m')
sys.exit(1)
self.close()
Raphael Defosseux
committed
def CheckUEStatus_common(self, lock, device_id, statusQueue):
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry', '\$', 15)
result = re.search('mServiceState=(?P<serviceState>[0-9]+)', str(self.ssh.before))
serviceState = 'Service State: UNKNOWN'
if result is not None:
lServiceState = int(result.group('serviceState'))
if lServiceState == 3:
serviceState = 'Service State: RADIO_POWERED_OFF'
if lServiceState == 1:
serviceState = 'Service State: OUT_OF_SERVICE'
if lServiceState == 0:
serviceState = 'Service State: IN_SERVICE'
if lServiceState == 2:
serviceState = 'Service State: EMERGENCY_ONLY'
result = re.search('mDataConnectionState=(?P<dataConnectionState>[0-9]+)', str(self.ssh.before))
dataConnectionState = 'Data State: UNKNOWN'
if result is not None:
lDataConnectionState = int(result.group('dataConnectionState'))
if lDataConnectionState == 0:
dataConnectionState = 'Data State: DISCONNECTED'
if lDataConnectionState == 1:
dataConnectionState = 'Data State: CONNECTING'
if lDataConnectionState == 2:
dataConnectionState = 'Data State: CONNECTED'
if lDataConnectionState == 3:
dataConnectionState = 'Data State: SUSPENDED'
result = re.search('mDataConnectionReason=(?P<dataConnectionReason>[0-9a-zA-Z_]+)', str(self.ssh.before))
dataConnectionReason = 'Data Reason: UNKNOWN'
if result is not None:
dataConnectionReason = 'Data Reason: ' + result.group('dataConnectionReason')
Raphael Defosseux
committed
lock.acquire()
logging.debug('\u001B[1;37;44m Status Check (' + str(device_id) + ') \u001B[0m')
logging.debug('\u001B[1;34m ' + serviceState + '\u001B[0m')
logging.debug('\u001B[1;34m ' + dataConnectionState + '\u001B[0m')
logging.debug('\u001B[1;34m ' + dataConnectionReason + '\u001B[0m')
Raphael Defosseux
committed
statusQueue.put(0)
statusQueue.put(device_id)
qMsg = serviceState + '\n' + dataConnectionState + '\n' + dataConnectionReason
statusQueue.put(qMsg)
Raphael Defosseux
committed
lock.release()
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def CheckStatusUE(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
check_eNB = True
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
Raphael Defosseux
committed
if (pStatus < 0):
self.CreateHtmlTestRow('N/A', 'KO', pStatus)
self.CreateHtmlTabFooter(False)
sys.exit(1)
multi_jobs = []
lock = Lock()
status_queue = SimpleQueue()
for device_id in self.UEDevices:
p = Process(target = self.CheckUEStatus_common, args = (lock,device_id,status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
if self.flexranCtrlInstalled and self.flexranCtrlStarted:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd /opt/flexran_rtc', '\$', 5)
self.command('curl http://localhost:9999/stats | jq \'.\' > log/check_status_' + self.testCase_id + '.log 2>&1', '\$', 5)
self.command('cat log/check_status_' + self.testCase_id + '.log | jq \'.eNB_config[0].UE\' | grep -c rnti | sed -e "s#^#Nb Connected UE = #"', '\$', 5)
result = re.search('Nb Connected UE = (?P<nb_ues>[0-9]+)', str(self.ssh.before))
passStatus = True
if result is not None:
nb_ues = int(result.group('nb_ues'))
htmlOptions = 'Nb Connected UE(s) to eNB = ' + str(nb_ues)
logging.debug('\u001B[1;37;44m ' + htmlOptions + ' \u001B[0m')
if self.expectedNbOfConnectedUEs > -1:
if nb_ues != self.expectedNbOfConnectedUEs:
passStatus = False
else:
htmlOptions = 'N/A'
self.close()
else:
Raphael Defosseux
committed
passStatus = True
Raphael Defosseux
committed
if (status_queue.empty()):
self.CreateHtmlTestRow(htmlOptions, 'KO', ALL_PROCESSES_OK)
Raphael Defosseux
committed
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
else:
check_status = True
html_queue = SimpleQueue()
while (not status_queue.empty()):
count = status_queue.get()
if (count < 0):
check_status = False
device_id = status_queue.get()
message = status_queue.get()
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + '</pre>'
html_queue.put(html_cell)
if check_status and passStatus:
self.CreateHtmlTestRowQueue(htmlOptions, 'OK', len(self.UEDevices), html_queue)
Raphael Defosseux
committed
else:
self.CreateHtmlTestRowQueue(htmlOptions, 'KO', len(self.UEDevices), html_queue)
Raphael Defosseux
committed
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
def GetAllUEIPAddresses(self):
if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
if (len(self.UEDevices) == 1) and (self.UEDevices[0] == 'OAI-UE'):
if self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('ifconfig oaitun_ue1', '\$', 4)
result = re.search('inet addr:(?P<ueipaddress>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)', str(self.ssh.before))
if result is not None:
UE_IPAddress = result.group('ueipaddress')
logging.debug('\u001B[1mUE (' + self.UEDevices[0] + ') IP Address is ' + UE_IPAddress + '\u001B[0m')
self.UEIPAddresses.append(UE_IPAddress)
else:
logging.debug('\u001B[1;37;41m UE IP Address Not Found! \u001B[0m')
ue_ip_status -= 1
self.close()
return ue_ip_status
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
for device_id in self.UEDevices:
count = 0
while count < 4:
self.command('stdbuf -o0 adb -s ' + device_id + ' shell ip addr show | grep rmnet', '\$', 15)
result = re.search('inet (?P<ueipaddress>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\/[0-9]+[0-9a-zA-Z\.\s]+', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m UE IP Address Not Found! \u001B[0m')
count += 1
else:
count = 10
if count < 9:
ue_ip_status -= 1
continue
UE_IPAddress = result.group('ueipaddress')
logging.debug('\u001B[1mUE (' + device_id + ') IP Address is ' + UE_IPAddress + '\u001B[0m')
for ueipaddress in self.UEIPAddresses:
if ueipaddress == UE_IPAddress:
Raphael Defosseux
committed
logging.debug('\u001B[1mUE (' + device_id + ') IP Address ' + UE_IPAddress + ': has already been allocated to another device !' + '\u001B[0m')
ue_ip_status -= 1
continue
self.UEIPAddresses.append(UE_IPAddress)
def ping_iperf_wrong_exit(self, lock, UE_IPAddress, device_id, statusQueue, message):
lock.acquire()
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put(UE_IPAddress)
statusQueue.put(message)
lock.release()
def Ping_common(self, lock, UE_IPAddress, device_id, statusQueue):
try:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
ping_time = re.findall("-c (\d+)",str(self.ping_args))
ping_status = self.command('stdbuf -o0 ping ' + self.ping_args + ' ' + UE_IPAddress + ' 2>&1 | stdbuf -o0 tee ping_' + self.testCase_id + '_' + device_id + '.log', '\$', int(ping_time[0])*1.5)
# TIMEOUT CASE
if ping_status < 0:
message = 'Ping with UE (' + str(UE_IPAddress) + ') crashed due to TIMEOUT!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
return
result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', str(self.ssh.before))
if result is None:
message = 'Packet Loss Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
packetloss = result.group('packetloss')
if float(packetloss) == 100:
message = 'Packet Loss is 100%'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', str(self.ssh.before))
if result is None:
message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
rtt_min = result.group('rtt_min')
rtt_avg = result.group('rtt_avg')
rtt_max = result.group('rtt_max')
pal_msg = 'Packet Loss : ' + packetloss + '%'
min_msg = 'RTT(Min) : ' + rtt_min + ' ms'
avg_msg = 'RTT(Avg) : ' + rtt_avg + ' ms'
max_msg = 'RTT(Max) : ' + rtt_max + ' ms'
lock.acquire()
logging.debug('\u001B[1;37;44m ping result (' + UE_IPAddress + ') \u001B[0m')
logging.debug('\u001B[1;34m ' + pal_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + min_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + avg_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + max_msg + '\u001B[0m')
qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
packetLossOK = True
if packetloss is not None:
if float(packetloss) > float(self.ping_packetloss_threshold):
logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
elif float(packetloss) > 0:
logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
if (packetLossOK):
statusQueue.put(0)
else:
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put(UE_IPAddress)
statusQueue.put(qMsg)
lock.release()
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def PingNoS1_wrong_exit(self, qMsg):
html_queue = SimpleQueue()
html_cell = '<pre style="background-color:white">OAI UE ping result\n' + qMsg + '</pre>'
html_queue.put(html_cell)
self.CreateHtmlTestRowQueue(self.ping_args, 'KO', len(self.UEDevices), html_queue)
def PingNoS1(self):
check_eNB = True
check_OAI_UE = True
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
ping_from_eNB = re.search('oaitun_enb1', str(self.ping_args))
if ping_from_eNB is not None:
if self.eNBIPAddress == '' or self.eNBUserName == '' or self.eNBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
else:
if self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '':
Usage()
sys.exit('Insufficient Parameter')
try:
if ping_from_eNB is not None:
self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
self.command('cd ' + self.eNBSourceCodePath + '/cmake_targets/', '\$', 5)
else:
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('cd ' + self.UESourceCodePath + '/cmake_targets/', '\$', 5)
self.command('cd cmake_targets', '\$', 5)
ping_time = re.findall("-c (\d+)",str(self.ping_args))
ping_status = self.command('stdbuf -o0 ping ' + self.ping_args + ' 2>&1 | stdbuf -o0 tee ping_' + self.testCase_id + '.log', '\$', int(ping_time[0])*1.5)
# TIMEOUT CASE
if ping_status < 0:
message = 'Ping with OAI UE crashed due to TIMEOUT!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.PingNoS1_wrong_exit(message)
return
result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', str(self.ssh.before))
if result is None:
message = 'Packet Loss Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.PingNoS1_wrong_exit(message)
return
packetloss = result.group('packetloss')
if float(packetloss) == 100:
message = 'Packet Loss is 100%'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.PingNoS1_wrong_exit(message)
return
result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', str(self.ssh.before))
if result is None:
message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.PingNoS1_wrong_exit(message)
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
return
rtt_min = result.group('rtt_min')
rtt_avg = result.group('rtt_avg')
rtt_max = result.group('rtt_max')
pal_msg = 'Packet Loss : ' + packetloss + '%'
min_msg = 'RTT(Min) : ' + rtt_min + ' ms'
avg_msg = 'RTT(Avg) : ' + rtt_avg + ' ms'
max_msg = 'RTT(Max) : ' + rtt_max + ' ms'
logging.debug('\u001B[1;37;44m OAI UE ping result \u001B[0m')
logging.debug('\u001B[1;34m ' + pal_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + min_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + avg_msg + '\u001B[0m')
logging.debug('\u001B[1;34m ' + max_msg + '\u001B[0m')
qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
packetLossOK = True
if packetloss is not None:
if float(packetloss) > float(self.ping_packetloss_threshold):
qMsg += '\nPacket Loss too high'
logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
packetLossOK = False
elif float(packetloss) > 0:
qMsg += '\nPacket Loss is not 0%'
logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
self.close()
html_queue = SimpleQueue()
ip_addr = 'TBD'
html_cell = '<pre style="background-color:white">OAI UE ping result\n' + qMsg + '</pre>'
html_queue.put(html_cell)
if packetLossOK:
self.CreateHtmlTestRowQueue(self.ping_args, 'OK', len(self.UEDevices), html_queue)
else:
self.CreateHtmlTestRowQueue(self.ping_args, 'KO', len(self.UEDevices), html_queue)
# copying on the EPC server for logCollection
if ping_from_eNB is not None:
copyin_res = self.copyin(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, self.eNBSourceCodePath + '/cmake_targets/ping_' + self.testCase_id + '.log', '.')
else:
copyin_res = self.copyin(self.UEIPAddress, self.UEUserName, self.UEPassword, self.UESourceCodePath + '/cmake_targets/ping_' + self.testCase_id + '.log', '.')
if (copyin_res == 0):
self.copyout(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, 'ping_' + self.testCase_id + '.log', self.EPCSourceCodePath + '/scripts')
except:
os.kill(os.getppid(),signal.SIGUSR1)
result = re.search('noS1', str(self.Initialize_eNB_args))
if result is not None:
self.PingNoS1()
return
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
if (len(self.UEDevices) == 1) and (self.UEDevices[0] == 'OAI-UE'):
check_OAI_UE = True
else:
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
ueIpStatus = self.GetAllUEIPAddresses()
if (ueIpStatus < 0):
self.CreateHtmlTestRow(self.ping_args, 'KO', UE_IP_ADDRESS_ISSUE)
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
multi_jobs = []
i = 0
lock = Lock()
for UE_IPAddress in self.UEIPAddresses:
device_id = self.UEDevices[i]
p = Process(target = self.Ping_common, args = (lock,UE_IPAddress,device_id,status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
i = i + 1
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow(self.ping_args, 'KO', ALL_PROCESSES_OK)
self.CreateHtmlTabFooter(False)
sys.exit(1)
else:
ping_status = True
html_queue = SimpleQueue()
while (not status_queue.empty()):
count = status_queue.get()
if (count < 0):
ping_status = False
device_id = status_queue.get()
ip_addr = status_queue.get()
message = status_queue.get()
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\nIP Address : ' + ip_addr + '\n' + message + '</pre>'
html_queue.put(html_cell)
if (ping_status):
self.CreateHtmlTestRowQueue(self.ping_args, 'OK', len(self.UEDevices), html_queue)
else:
self.CreateHtmlTestRowQueue(self.ping_args, 'KO', len(self.UEDevices), html_queue)
self.CreateHtmlTabFooter(False)
def Iperf_ComputeTime(self):
result = re.search('-t (?P<iperf_time>\d+)', str(self.iperf_args))
if result is None:
logging.debug('\u001B[1;37;41m Iperf time Not Found! \u001B[0m')
sys.exit(1)
return result.group('iperf_time')
def Iperf_ComputeModifiedBW(self, idx, ue_num):
result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(self.iperf_args))
if result is None:
logging.debug('\u001B[1;37;41m Iperf bandwidth Not Found! \u001B[0m')
sys.exit(1)
iperf_bandwidth = result.group('iperf_bandwidth')
if self.iperf_profile == 'balanced':
iperf_bandwidth_new = float(iperf_bandwidth)/ue_num
if self.iperf_profile == 'single-ue':
iperf_bandwidth_new = float(iperf_bandwidth)
if self.iperf_profile == 'unbalanced':
# residual is 2% of max bw
residualBW = float(iperf_bandwidth) / 50
if idx == 0:
iperf_bandwidth_new = float(iperf_bandwidth) - ((ue_num - 1) * residualBW)
else:
iperf_bandwidth_new = residualBW
iperf_bandwidth_str = '-b ' + iperf_bandwidth
iperf_bandwidth_str_new = '-b ' + ('%.2f' % iperf_bandwidth_new)
result = re.sub(iperf_bandwidth_str, iperf_bandwidth_str_new, str(self.iperf_args))
if result is None:
logging.debug('\u001B[1;37;41m Calculate Iperf bandwidth Failed! \u001B[0m')
sys.exit(1)
return result
def Iperf_analyzeV2TCPOutput(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
self.command('awk -f /tmp/tcp_iperf_stats.awk /tmp/CI-eNB/scripts/iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', 5)
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
result = re.search('Avg Bitrate : (?P<average>[0-9\.]+ Mbits\/sec) Max Bitrate : (?P<maximum>[0-9\.]+ Mbits\/sec) Min Bitrate : (?P<minimum>[0-9\.]+ Mbits\/sec)', str(self.ssh.before))
if result is not None:
avgbitrate = result.group('average')
maxbitrate = result.group('maximum')
minbitrate = result.group('minimum')
lock.acquire()
logging.debug('\u001B[1;37;44m TCP iperf result (' + UE_IPAddress + ') \u001B[0m')
msg = 'TCP Stats :\n'
if avgbitrate is not None:
logging.debug('\u001B[1;34m Avg Bitrate : ' + avgbitrate + '\u001B[0m')
msg += 'Avg Bitrate : ' + avgbitrate + '\n'
if maxbitrate is not None:
logging.debug('\u001B[1;34m Max Bitrate : ' + maxbitrate + '\u001B[0m')
msg += 'Max Bitrate : ' + maxbitrate + '\n'
if minbitrate is not None:
logging.debug('\u001B[1;34m Min Bitrate : ' + minbitrate + '\u001B[0m')
msg += 'Min Bitrate : ' + minbitrate + '\n'
statusQueue.put(0)
statusQueue.put(device_id)
statusQueue.put(UE_IPAddress)
statusQueue.put(msg)
lock.release()
return 0
def Iperf_analyzeV2Output(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
result = re.search('-u', str(iperf_real_options))
if result is None:
return self.Iperf_analyzeV2TCPOutput(lock, UE_IPAddress, device_id, statusQueue, iperf_real_options)
result = re.search('Server Report:', str(self.ssh.before))
if result is None:
result = re.search('read failed: Connection refused', str(self.ssh.before))
if result is not None:
logging.debug('\u001B[1;37;41m Could not connect to iperf server! \u001B[0m')
else:
logging.debug('\u001B[1;37;41m Server Report and Connection refused Not Found! \u001B[0m')
# Computing the requested bandwidth in float
result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(iperf_real_options))
if result is not None:
req_bandwidth = result.group('iperf_bandwidth')
req_bw = float(req_bandwidth)
result = re.search('-b [0-9\.]+K', str(iperf_real_options))
if result is not None:
req_bandwidth = '%.1f Kbits/sec' % req_bw
req_bw = req_bw * 1000
result = re.search('-b [0-9\.]+M', str(iperf_real_options))
if result is not None:
req_bandwidth = '%.1f Mbits/sec' % req_bw
req_bw = req_bw * 1000000
result = re.search('-b [0-9\.]+G', str(iperf_real_options))
if result is not None:
req_bandwidth = '%.1f Gbits/sec' % req_bw
req_bw = req_bw * 1000000000
result = re.search('Server Report:\\\\r\\\\n(?:|\[ *\d+\].*) (?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?P<jitter>[0-9\.]+ ms) +(\d+\/..\d+) (\((?P<packetloss>[0-9\.]+)%\))', str(self.ssh.before))
if result is not None:
bitrate = result.group('bitrate')
packetloss = result.group('packetloss')
jitter = result.group('jitter')
lock.acquire()
logging.debug('\u001B[1;37;44m iperf result (' + UE_IPAddress + ') \u001B[0m')
msg = 'Req Bitrate : ' + req_bandwidth + '\n'
logging.debug('\u001B[1;34m Req Bitrate : ' + req_bandwidth + '\u001B[0m')
logging.debug('\u001B[1;34m Bitrate : ' + bitrate + '\u001B[0m')
result = re.search('(?P<real_bw>[0-9\.]+) [KMG]bits/sec', str(bitrate))
if result is not None:
actual_bw = float(str(result.group('real_bw')))
result = re.search('[0-9\.]+ K', bitrate)
if result is not None:
actual_bw = actual_bw * 1000
result = re.search('[0-9\.]+ M', bitrate)
if result is not None:
actual_bw = actual_bw * 1000000
result = re.search('[0-9\.]+ G', bitrate)
if result is not None:
actual_bw = actual_bw * 1000000000
br_loss = 100 * actual_bw / req_bw
bitperf = '%.2f ' % br_loss
msg += 'Bitrate Perf: ' + bitperf + '%\n'
logging.debug('\u001B[1;34m Bitrate Perf: ' + bitperf + '%\u001B[0m')
logging.debug('\u001B[1;34m Packet Loss : ' + packetloss + '%\u001B[0m')
if float(packetloss) > float(self.iperf_packetloss_threshold):
logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
logging.debug('\u001B[1;34m Jitter : ' + jitter + '\u001B[0m')
if (iperfStatus):
statusQueue.put(0)
else:
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put(UE_IPAddress)
statusQueue.put(msg)
return 0
def Iperf_analyzeV2Server(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
if (not os.path.isfile('iperf_server_' + self.testCase_id + '_' + device_id + '.log')):
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, 'Could not analyze from server log')
return
# Computing the requested bandwidth in float
result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(iperf_real_options))
if result is None:
logging.debug('Iperf bandwidth Not Found!')
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, 'Could not compute Iperf bandwidth!')
return
else:
req_bandwidth = result.group('iperf_bandwidth')
req_bw = float(req_bandwidth)
result = re.search('-b [0-9\.]+K', str(iperf_real_options))
if result is not None:
req_bandwidth = '%.1f Kbits/sec' % req_bw
req_bw = req_bw * 1000
result = re.search('-b [0-9\.]+M', str(iperf_real_options))
if result is not None:
req_bandwidth = '%.1f Mbits/sec' % req_bw
req_bw = req_bw * 1000000
result = re.search('-b [0-9\.]+G', str(iperf_real_options))
if result is not None:
req_bandwidth = '%.1f Gbits/sec' % req_bw
req_bw = req_bw * 1000000000
server_file = open('iperf_server_' + self.testCase_id + '_' + device_id + '.log', 'r')
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
br_sum = 0.0
ji_sum = 0.0
pl_sum = 0
ps_sum = 0
row_idx = 0
for line in server_file.readlines():
result = re.search('(?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?P<jitter>[0-9\.]+ ms) +(?P<lostPack>[0-9]+)/ +(?P<sentPack>[0-9]+)', str(line))
if result is not None:
bitrate = result.group('bitrate')
jitter = result.group('jitter')
packetlost = result.group('lostPack')
packetsent = result.group('sentPack')
br = bitrate.split(' ')
ji = jitter.split(' ')
row_idx = row_idx + 1
curr_br = float(br[0])
pl_sum = pl_sum + int(packetlost)
ps_sum = ps_sum + int(packetsent)
if (br[1] == 'Kbits/sec'):
curr_br = curr_br * 1000
if (br[1] == 'Mbits/sec'):
curr_br = curr_br * 1000 * 1000
br_sum = curr_br + br_sum
ji_sum = float(ji[0]) + ji_sum
if (row_idx > 0):
br_sum = br_sum / row_idx
ji_sum = ji_sum / row_idx
br_loss = 100 * br_sum / req_bw
if (br_sum > 1000):
br_sum = br_sum / 1000
if (br_sum > 1000):
br_sum = br_sum / 1000
bitrate = '%.2f Mbits/sec' % br_sum
else:
bitrate = '%.2f Kbits/sec' % br_sum
else:
bitrate = '%.2f bits/sec' % br_sum
bitperf = '%.2f ' % br_loss
bitperf += '%'
jitter = '%.2f ms' % (ji_sum)
if (ps_sum > 0):
pl = float(100 * pl_sum / ps_sum)
packetloss = '%2.1f ' % (pl)
packetloss += '%'
else:
packetloss = 'unknown'
lock.acquire()
if (br_loss < 90):
statusQueue.put(1)
else:
statusQueue.put(0)
statusQueue.put(device_id)
statusQueue.put(UE_IPAddress)
req_msg = 'Req Bitrate : ' + req_bandwidth
bir_msg = 'Bitrate : ' + bitrate
brl_msg = 'Bitrate Perf: ' + bitperf
jit_msg = 'Jitter : ' + jitter
pal_msg = 'Packet Loss : ' + packetloss
statusQueue.put(req_msg + '\n' + bir_msg + '\n' + brl_msg + '\n' + jit_msg + '\n' + pal_msg + '\n')
logging.debug('\u001B[1;37;45m iperf result (' + UE_IPAddress + ') \u001B[0m')
logging.debug('\u001B[1;35m ' + req_msg + '\u001B[0m')
logging.debug('\u001B[1;35m ' + bir_msg + '\u001B[0m')
logging.debug('\u001B[1;35m ' + brl_msg + '\u001B[0m')
logging.debug('\u001B[1;35m ' + jit_msg + '\u001B[0m')
logging.debug('\u001B[1;35m ' + pal_msg + '\u001B[0m')
lock.release()
else:
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, 'Could not analyze from server log')
def Iperf_analyzeV3Output(self, lock, UE_IPAddress, device_id, statusQueue):
result = re.search('(?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?:|[0-9\.]+ ms +\d+\/\d+ \((?P<packetloss>[0-9\.]+)%\)) +(?:|receiver)\\\\r\\\\n(?:|\[ *\d+\] Sent \d+ datagrams)\\\\r\\\\niperf Done\.', str(self.ssh.before))
if result is None:
result = re.search('(?P<error>iperf: error - [a-zA-Z0-9 :]+)', str(self.ssh.before))
lock.acquire()
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put(UE_IPAddress)
if result is not None:
logging.debug('\u001B[1;37;41m ' + result.group('error') + ' \u001B[0m')
else:
logging.debug('\u001B[1;37;41m Bitrate and/or Packet Loss Not Found! \u001B[0m')
statusQueue.put('Bitrate and/or Packet Loss Not Found!')
lock.release()
bitrate = result.group('bitrate')
packetloss = result.group('packetloss')
lock.acquire()
logging.debug('\u001B[1;37;44m iperf result (' + UE_IPAddress + ') \u001B[0m')
logging.debug('\u001B[1;34m Bitrate : ' + bitrate + '\u001B[0m')
if packetloss is not None:
logging.debug('\u001B[1;34m Packet Loss : ' + packetloss + '%\u001B[0m')
if float(packetloss) > float(self.iperf_packetloss_threshold):
logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
msg += 'Packet Loss too high!\n'
iperfStatus = False
if (iperfStatus):
statusQueue.put(0)
else:
statusQueue.put(-1)
statusQueue.put(device_id)
statusQueue.put(UE_IPAddress)
def Iperf_UL_common(self, lock, UE_IPAddress, device_id, idx, ue_num, statusQueue):
udpIperf = True
result = re.search('-u', str(self.iperf_args))
if result is None:
udpIperf = False
ipnumbers = UE_IPAddress.split('.')
if (len(ipnumbers) == 4):
ipnumbers[3] = '1'
EPC_Iperf_UE_IPAddress = ipnumbers[0] + '.' + ipnumbers[1] + '.' + ipnumbers[2] + '.' + ipnumbers[3]
# Launch iperf server on EPC side
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
self.command('rm -f iperf_server_' + self.testCase_id + '_' + device_id + '.log', '\$', 5)
self.command('echo $USER; nohup iperf -u -s -i 1 -p ' + str(port) + ' > iperf_server_' + self.testCase_id + '_' + device_id + '.log &', self.EPCUserName, 5)
self.command('echo $USER; nohup iperf -s -i 1 -p ' + str(port) + ' > iperf_server_' + self.testCase_id + '_' + device_id + '.log &', self.EPCUserName, 5)
time.sleep(0.5)
self.close()
# Launch iperf client on UE
if (device_id == 'OAI-UE'):
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('cd ' + self.UESourceCodePath + '/cmake_targets', '\$', 5)
else:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
iperf_time = self.Iperf_ComputeTime()
time.sleep(0.5)
if udpIperf:
modified_options = self.Iperf_ComputeModifiedBW(idx, ue_num)
else:
modified_options = str(self.iperf_args)
self.command('rm -f iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', 5)
if (device_id == 'OAI-UE'):
iperf_status = self.command('iperf -c ' + EPC_Iperf_UE_IPAddress + ' ' + modified_options + ' -p ' + str(port) + ' -B ' + UE_IPAddress + ' 2>&1 | stdbuf -o0 tee iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', int(iperf_time)*5.0)
else:
iperf_status = self.command('stdbuf -o0 adb -s ' + device_id + ' shell "/data/local/tmp/iperf -c ' + EPC_Iperf_UE_IPAddress + ' ' + modified_options + ' -p ' + str(port) + '" 2>&1 | stdbuf -o0 tee iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', int(iperf_time)*5.0)
# TIMEOUT Case
if iperf_status < 0:
self.close()
message = 'iperf on UE (' + str(UE_IPAddress) + ') crashed due to TIMEOUT !'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
return
clientStatus = self.Iperf_analyzeV2Output(lock, UE_IPAddress, device_id, statusQueue, modified_options)
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('killall --signal SIGKILL iperf', self.EPCUserName, 5)
self.close()
if (os.path.isfile('iperf_server_' + self.testCase_id + '_' + device_id + '.log')):
os.remove('iperf_server_' + self.testCase_id + '_' + device_id + '.log')
self.copyin(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, self.EPCSourceCodePath + '/scripts/iperf_server_' + self.testCase_id + '_' + device_id + '.log', '.')
self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, modified_options)
# in case of OAI-UE
if (device_id == 'OAI-UE'):
self.copyin(self.UEIPAddress, self.UEUserName, self.UEPassword, self.UESourceCodePath + '/cmake_targets/iperf_' + self.testCase_id + '_' + device_id + '.log', '.')
self.copyout(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, 'iperf_' + self.testCase_id + '_' + device_id + '.log', self.EPCSourceCodePath + '/scripts')
def Iperf_common(self, lock, UE_IPAddress, device_id, idx, ue_num, statusQueue):
# Single-UE profile -- iperf only on one UE
if self.iperf_profile == 'single-ue' and idx != 0:
if (device_id != 'OAI-UE'):
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
# if by chance ADB server and EPC are on the same remote host, at least log collection will take care of it
self.command('if [ ! -d ' + self.EPCSourceCodePath + '/scripts ]; then mkdir -p ' + self.EPCSourceCodePath + '/scripts ; fi', '\$', 5)
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
# Checking if iperf / iperf3 are installed
self.command('adb -s ' + device_id + ' shell "ls /data/local/tmp"', '\$', 5)
result = re.search('iperf3', str(self.ssh.before))
result = re.search('iperf', str(self.ssh.before))
if result is None:
message = 'Neither iperf nor iperf3 installed on UE!'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.close()
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
return
else:
useIperf3 = True
self.close()
# in case of iperf, UL has its own function
if (not useIperf3):
result = re.search('-R', str(self.iperf_args))
if result is not None:
self.Iperf_UL_common(lock, UE_IPAddress, device_id, idx, ue_num, statusQueue)
# Launch the IPERF server on the UE side for DL
if (device_id == 'OAI-UE'):
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('cd ' + self.UESourceCodePath + '/cmake_targets', '\$', 5)
self.command('rm -f iperf_server_' + self.testCase_id + '_' + device_id + '.log', '\$', 5)
result = re.search('-u', str(self.iperf_args))
if result is None:
self.command('echo $USER; nohup iperf -B ' + UE_IPAddress + ' -s -i 1 > iperf_server_' + self.testCase_id + '_' + device_id + '.log &', self.UEUserName, 5)
self.command('echo $USER; nohup iperf -B ' + UE_IPAddress + ' -u -s -i 1 > iperf_server_' + self.testCase_id + '_' + device_id + '.log &', self.UEUserName, 5)
else:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
if (useIperf3):
self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/iperf3 -s &', '\$', 5)
else:
self.command('rm -f iperf_server_' + self.testCase_id + '_' + device_id + '.log', '\$', 5)
result = re.search('-u', str(self.iperf_args))
if result is None:
self.command('echo $USER; nohup adb -s ' + device_id + ' shell "/data/local/tmp/iperf -s -i 1" > iperf_server_' + self.testCase_id + '_' + device_id + '.log &', self.ADBUserName, 5)
udpIperf = False
else:
self.command('echo $USER; nohup adb -s ' + device_id + ' shell "/data/local/tmp/iperf -u -s -i 1" > iperf_server_' + self.testCase_id + '_' + device_id + '.log &', self.ADBUserName, 5)
time.sleep(0.5)
self.close()
# Launch the IPERF client on the EPC side for DL
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
iperf_time = self.Iperf_ComputeTime()
if udpIperf:
modified_options = self.Iperf_ComputeModifiedBW(idx, ue_num)
else:
modified_options = str(self.iperf_args)
self.command('rm -f iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', 5)
self.command('stdbuf -o0 iperf3 -c ' + UE_IPAddress + ' ' + modified_options + ' 2>&1 | stdbuf -o0 tee iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', int(iperf_time)*5.0)
self.Iperf_analyzeV3Output(lock, UE_IPAddress, device_id, statusQueue)
iperf_status = self.command('stdbuf -o0 iperf -c ' + UE_IPAddress + ' ' + modified_options + ' 2>&1 | stdbuf -o0 tee iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', int(iperf_time)*5.0)
if iperf_status < 0:
self.close()
message = 'iperf on UE (' + str(UE_IPAddress) + ') crashed due to TIMEOUT !'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
return
clientStatus = self.Iperf_analyzeV2Output(lock, UE_IPAddress, device_id, statusQueue, modified_options)
# Kill the IPERF server that runs in background
if (device_id == 'OAI-UE'):
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('killall iperf', '\$', 5)
else:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
self.command('stdbuf -o0 adb -s ' + device_id + ' shell ps | grep --color=never iperf | grep -v grep', '\$', 5)
result = re.search('shell +(?P<pid>\d+)', str(self.ssh.before))
if result is not None:
pid_iperf = result.group('pid')
self.command('stdbuf -o0 adb -s ' + device_id + ' shell kill -KILL ' + pid_iperf, '\$', 5)
# if the client report is absent, try to analyze the server log file
if (os.path.isfile('iperf_server_' + self.testCase_id + '_' + device_id + '.log')):
os.remove('iperf_server_' + self.testCase_id + '_' + device_id + '.log')
if (device_id == 'OAI-UE'):
self.copyin(self.UEIPAddress, self.UEUserName, self.UEPassword, self.UESourceCodePath + '/cmake_targets/iperf_server_' + self.testCase_id + '_' + device_id + '.log', '.')
else:
self.copyin(self.ADBIPAddress, self.ADBUserName, self.ADBPassword, self.EPCSourceCodePath + '/scripts/iperf_server_' + self.testCase_id + '_' + device_id + '.log', '.')
self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, modified_options)
# in case of OAI UE:
if (device_id == 'OAI-UE'):
if (os.path.isfile('iperf_server_' + self.testCase_id + '_' + device_id + '.log')):
pass
else:
self.copyin(self.UEIPAddress, self.UEUserName, self.UEPassword, self.UESourceCodePath + '/cmake_targets/iperf_server_' + self.testCase_id + '_' + device_id + '.log', '.')
self.copyout(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, 'iperf_server_' + self.testCase_id + '_' + device_id + '.log', self.EPCSourceCodePath + '/scripts')
except:
os.kill(os.getppid(),signal.SIGUSR1)
check_eNB = True
check_OAI_UE = True
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow(self.iperf_args, 'KO', pStatus)
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
if self.eNBIPAddress == '' or self.eNBUserName == '' or self.eNBPassword == '' or self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '':
Usage()
sys.exit('Insufficient Parameter')
server_on_enb = re.search('-R', str(self.iperf_args))
if server_on_enb is not None:
iServerIPAddr = self.eNBIPAddress
iServerUser = self.eNBUserName
iServerPasswd = self.eNBPassword
iClientIPAddr = self.UEIPAddress
iClientUser = self.UEUserName
iClientPasswd = self.UEPassword
else:
iServerIPAddr = self.UEIPAddress
iServerUser = self.UEUserName
iServerPasswd = self.UEPassword
iClientIPAddr = self.eNBIPAddress
iClientUser = self.eNBUserName
iClientPasswd = self.eNBPassword
# Starting the iperf server
self.open(iServerIPAddr, iServerUser, iServerPasswd)
# args SHALL be "-c client -u any"
# -c 10.0.1.2 -u -b 1M -t 30 -i 1 -fm -B 10.0.1.1
# -B 10.0.1.1 -u -s -i 1 -fm
server_options = re.sub('-u.*$', '-u -s -i 1 -fm', str(self.iperf_args))
server_options = server_options.replace('-c','-B')
self.command('rm -f /tmp/tmp_iperf_server_' + self.testCase_id + '.log', '\$', 5)
self.command('echo $USER; nohup iperf ' + server_options + ' > /tmp/tmp_iperf_server_' + self.testCase_id + '.log 2>&1 &', iServerUser, 5)
time.sleep(0.5)
self.close()
# Starting the iperf client
modified_options = self.Iperf_ComputeModifiedBW(0, 1)
modified_options = modified_options.replace('-R','')
iperf_time = self.Iperf_ComputeTime()
self.open(iClientIPAddr, iClientUser, iClientPasswd)
self.command('rm -f /tmp/tmp_iperf_' + self.testCase_id + '.log', '\$', 5)
iperf_status = self.command('stdbuf -o0 iperf ' + modified_options + ' 2>&1 | stdbuf -o0 tee /tmp/tmp_iperf_' + self.testCase_id + '.log', '\$', int(iperf_time)*5.0)
status_queue = SimpleQueue()
lock = Lock()
if iperf_status < 0:
message = 'iperf on OAI UE crashed due to TIMEOUT !'
logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
clientStatus = -2
else:
clientStatus = self.Iperf_analyzeV2Output(lock, '10.0.1.2', 'OAI-UE', status_queue, modified_options)
self.close()
# Stopping the iperf server
self.open(iServerIPAddr, iServerUser, iServerPasswd)
self.command('killall --signal SIGKILL iperf', '\$', 5)
time.sleep(0.5)
self.close()
if (clientStatus == -1):
if (os.path.isfile('iperf_server_' + self.testCase_id + '.log')):
os.remove('iperf_server_' + self.testCase_id + '.log')
self.copyin(iServerIPAddr, iServerUser, iServerPasswd, '/tmp/tmp_iperf_server_' + self.testCase_id + '.log', 'iperf_server_' + self.testCase_id + '_OAI-UE.log')
self.Iperf_analyzeV2Server(lock, '10.0.1.2', 'OAI-UE', status_queue, modified_options)
# copying on the EPC server for logCollection
copyin_res = self.copyin(iServerIPAddr, iServerUser, iServerPasswd, '/tmp/tmp_iperf_server_' + self.testCase_id + '.log', 'iperf_server_' + self.testCase_id + '_OAI-UE.log')
if (copyin_res == 0):
self.copyout(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, 'iperf_server_' + self.testCase_id + '_OAI-UE.log', self.EPCSourceCodePath + '/scripts')
copyin_res = self.copyin(iClientIPAddr, iClientUser, iClientPasswd, '/tmp/tmp_iperf_' + self.testCase_id + '.log', 'iperf_' + self.testCase_id + '_OAI-UE.log')
if (copyin_res == 0):
self.copyout(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, 'iperf_' + self.testCase_id + '_OAI-UE.log', self.EPCSourceCodePath + '/scripts')
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
iperf_noperf = False
if status_queue.empty():
iperf_status = False
else:
iperf_status = True
html_queue = SimpleQueue()
while (not status_queue.empty()):
count = status_queue.get()
if (count < 0):
iperf_status = False
if (count > 0):
iperf_noperf = True
device_id = status_queue.get()
ip_addr = status_queue.get()
message = status_queue.get()
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\nIP Address : ' + ip_addr + '\n' + message + '</pre>'
html_queue.put(html_cell)
if (iperf_noperf and iperf_status):
self.CreateHtmlTestRowQueue(self.iperf_args, 'PERF NOT MET', len(self.UEDevices), html_queue)
elif (iperf_status):
self.CreateHtmlTestRowQueue(self.iperf_args, 'OK', len(self.UEDevices), html_queue)
else:
self.CreateHtmlTestRowQueue(self.iperf_args, 'KO', len(self.UEDevices), html_queue)
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
result = re.search('noS1', str(self.Initialize_eNB_args))
if result is not None:
self.IperfNoS1()
return
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
if (len(self.UEDevices) == 1) and (self.UEDevices[0] == 'OAI-UE'):
check_OAI_UE = True
else:
check_OAI_UE = False
pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
if (pStatus < 0):
self.CreateHtmlTestRow(self.iperf_args, 'KO', pStatus)
self.CreateHtmlTabFooter(False)
ueIpStatus = self.GetAllUEIPAddresses()
if (ueIpStatus < 0):
self.CreateHtmlTestRow(self.iperf_args, 'KO', UE_IP_ADDRESS_ISSUE)
self.CreateHtmlTabFooter(False)
multi_jobs = []
i = 0
ue_num = len(self.UEIPAddresses)
lock = Lock()
for UE_IPAddress in self.UEIPAddresses:
device_id = self.UEDevices[i]
p = Process(target = SSH.Iperf_common, args = (lock,UE_IPAddress,device_id,i,ue_num,status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
i = i + 1
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow(self.iperf_args, 'KO', ALL_PROCESSES_OK)
self.CreateHtmlTabFooter(False)
html_queue = SimpleQueue()
while (not status_queue.empty()):
count = status_queue.get()
if (count < 0):
iperf_status = False
device_id = status_queue.get()
ip_addr = status_queue.get()
message = status_queue.get()
html_cell = '<pre style="background-color:white">UE (' + device_id + ')\nIP Address : ' + ip_addr + '\n' + message + '</pre>'
if (iperf_noperf and iperf_status):
self.CreateHtmlTestRowQueue(self.iperf_args, 'PERF NOT MET', len(self.UEDevices), html_queue)
elif (iperf_status):
self.CreateHtmlTestRowQueue(self.iperf_args, 'OK', len(self.UEDevices), html_queue)
else:
self.CreateHtmlTestRowQueue(self.iperf_args, 'KO', len(self.UEDevices), html_queue)
self.CreateHtmlTabFooter(False)
def CheckProcessExist(self, check_eNB, check_OAI_UE):
# in noS1 config, no need to check status from EPC
result = re.search('noS1', str(self.Initialize_eNB_args))
if result is None:
p = Process(target = SSH.CheckHSSProcess, args = (status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
p = Process(target = SSH.CheckMMEProcess, args = (status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
p = Process(target = SSH.CheckSPGWProcess, args = (status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
else:
if (check_eNB == False) and (check_OAI_UE == False):
return 0
if check_eNB:
p = Process(target = SSH.CheckeNBProcess, args = (status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
if check_OAI_UE:
p = Process(target = SSH.CheckOAIUEProcess, args = (status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
if (status_queue.empty()):
return -15
else:
result = 0
while (not status_queue.empty()):
status = status_queue.get()
if (status < 0):
result = status
if result == ENB_PROCESS_FAILED:
Raphael Defosseux
committed
fileCheck = re.search('enb_', str(self.eNBLogFiles[0]))
if fileCheck is not None:
Raphael Defosseux
committed
self.copyin(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, self.eNBSourceCodePath + '/cmake_targets/' + self.eNBLogFiles[0], '.')
logStatus = self.AnalyzeLogFile_eNB(self.eNBLogFiles[0])
if logStatus < 0:
result = logStatus
Raphael Defosseux
committed
self.eNBLogFiles[0] = ''
if self.flexranCtrlInstalled and self.flexranCtrlStarted:
self.TerminateFlexranCtrl()
def CheckOAIUEProcessExist(self, initialize_OAI_UE_flag):
multi_jobs = []
status_queue = SimpleQueue()
if initialize_OAI_UE_flag == False:
p = Process(target = SSH.CheckOAIUEProcess, args = (status_queue,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
if (status_queue.empty()):
return -15
else:
result = 0
while (not status_queue.empty()):
status = status_queue.get()
if (status < 0):
result = status
if result == OAI_UE_PROCESS_FAILED:
fileCheck = re.search('ue_', str(self.UELogFile))
if fileCheck is not None:
self.copyin(self.UEIPAddress, self.UEUserName, self.UEPassword, self.UESourceCodePath + '/cmake_targets/' + self.UELogFile, '.')
logStatus = self.AnalyzeLogFile_UE(self.UELogFile)
if logStatus < 0:
result = logStatus
return result
def CheckOAIUEProcess(self, status_queue):
try:
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('stdbuf -o0 ps -aux | grep --color=never softmodem | grep -v grep', '\$', 5)
result = re.search('lte-uesoftmodem', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m OAI UE Process Not Found! \u001B[0m')
status_queue.put(OAI_UE_PROCESS_FAILED)
else:
status_queue.put(OAI_UE_PROCESS_OK)
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
try:
self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
self.command('stdbuf -o0 ps -aux | grep --color=never softmodem | grep -v grep', '\$', 5)
result = re.search('lte-softmodem', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m eNB Process Not Found! \u001B[0m')
status_queue.put(ENB_PROCESS_FAILED)
status_queue.put(ENB_PROCESS_OK)
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
try:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('stdbuf -o0 ps -aux | grep --color=never hss | grep -v grep', '\$', 5)
if re.match('OAI', self.EPCType, re.IGNORECASE):
result = re.search('\/bin\/bash .\/run_', str(self.ssh.before))
else:
result = re.search('hss_sim s6as diam_hss', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m HSS Process Not Found! \u001B[0m')
status_queue.put(HSS_PROCESS_FAILED)
status_queue.put(HSS_PROCESS_OK)
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
try:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('stdbuf -o0 ps -aux | grep --color=never mme | grep -v grep', '\$', 5)
if re.match('OAI', self.EPCType, re.IGNORECASE):
result = re.search('\/bin\/bash .\/run_', str(self.ssh.before))
else:
result = re.search('mme', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m MME Process Not Found! \u001B[0m')
status_queue.put(MME_PROCESS_FAILED)
status_queue.put(MME_PROCESS_OK)
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
try:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('stdbuf -o0 ps -aux | grep --color=never spgw | grep -v grep', '\$', 5)
result = re.search('\/bin\/bash .\/run_', str(self.ssh.before))
else:
self.command('stdbuf -o0 ps -aux | grep --color=never xGw | grep -v grep', '\$', 5)
result = re.search('xGw', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m SPGW Process Not Found! \u001B[0m')
status_queue.put(SPGW_PROCESS_FAILED)
status_queue.put(SPGW_PROCESS_OK)
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def AnalyzeLogFile_eNB(self, eNBlogFile):
if (not os.path.isfile('./' + eNBlogFile)):
enb_log_file = open('./' + eNBlogFile, 'r')
exitSignalReceived = False
foundAssertion = False
msgAssertion = ''
msgLine = 0
foundSegFault = False
foundRealTimeIssue = False
rrcSetupComplete = 0
rrcReleaseRequest = 0
rrcReconfigRequest = 0
rrcReconfigComplete = 0
rrcReestablishRequest = 0
rrcReestablishComplete = 0
rrcReestablishReject = 0
rlcDiscardBuffer = 0
rachCanceledProcedure = 0
cdrxActivationMessageCount = 0
self.htmleNBFailureMsg = ''
Raphael Defosseux
committed
isRRU = False
isSlave = False
slaveReceivesFrameResyncCmd = False
for line in enb_log_file.readlines():
Raphael Defosseux
committed
if self.eNBOptions[int(self.eNB_instance)] != '':
res1 = re.search('max_rxgain (?P<requested_option>[0-9]+)', self.eNBOptions[int(self.eNB_instance)])
res2 = re.search('max_rxgain (?P<applied_option>[0-9]+)', str(line))
if res1 is not None and res2 is not None:
requested_option = int(res1.group('requested_option'))
applied_option = int(res2.group('applied_option'))
if requested_option == applied_option:
Raphael Defosseux
committed
self.htmleNBFailureMsg += '<span class="glyphicon glyphicon-ok-circle"></span> Command line option(s) correctly applied <span class="glyphicon glyphicon-arrow-right"></span> ' + self.eNBOptions[int(self.eNB_instance)] + '\n\n'
Raphael Defosseux
committed
self.htmleNBFailureMsg += '<span class="glyphicon glyphicon-ban-circle"></span> Command line option(s) NOT applied <span class="glyphicon glyphicon-arrow-right"></span> ' + self.eNBOptions[int(self.eNB_instance)] + '\n\n'
result = re.search('Exiting OAI softmodem', str(line))
exitSignalReceived = True
result = re.search('[Ss]egmentation [Ff]ault', str(line))
if result is not None and not exitSignalReceived:
foundSegFault = True
result = re.search('[Cc]ore [dD]ump', str(line))
if result is not None and not exitSignalReceived:
foundSegFault = True
result = re.search('./lte_build_oai/build/lte-softmodem', str(line))
if result is not None and not exitSignalReceived:
foundSegFault = True
result = re.search('[Aa]ssertion', str(line))
if result is not None and not exitSignalReceived:
foundAssertion = True
result = re.search('LLL', str(line))
if result is not None and not exitSignalReceived:
foundRealTimeIssue = True
if foundAssertion and (msgLine < 3):
msgLine += 1
msgAssertion += str(line)
Raphael Defosseux
committed
result = re.search('Setting function for RU', str(line))
if result is not None:
isRRU = True
if isRRU:
result = re.search('RU 0 is_slave=yes', str(line))
if result is not None:
isSlave = True
if isSlave:
result = re.search('Received RRU_frame_resynch command', str(line))
if result is not None:
slaveReceivesFrameResyncCmd = True
result = re.search('LTE_RRCConnectionSetupComplete from UE', str(line))
Raphael Defosseux
committed
result = re.search('Generate LTE_RRCConnectionRelease|Generate RRCConnectionRelease', str(line))
if result is not None:
rrcReleaseRequest += 1
result = re.search('Generate LTE_RRCConnectionReconfiguration', str(line))
if result is not None:
rrcReconfigRequest += 1
result = re.search('LTE_RRCConnectionReconfigurationComplete from UE rnti', str(line))
if result is not None:
rrcReconfigComplete += 1
result = re.search('LTE_RRCConnectionReestablishmentRequest', str(line))
if result is not None:
rrcReestablishRequest += 1
result = re.search('LTE_RRCConnectionReestablishmentComplete', str(line))
if result is not None:
rrcReestablishComplete += 1
result = re.search('LTE_RRCConnectionReestablishmentReject', str(line))
if result is not None:
rrcReestablishReject += 1
result = re.search('CDRX configuration activated after RRC Connection', str(line))
if result is not None:
cdrxActivationMessageCount += 1
result = re.search('uci->stat', str(line))
if result is not None:
uciStatMsgCount += 1
result = re.search('PDCP.*Out of Resources.*reason', str(line))
if result is not None:
pdcpFailure += 1
result = re.search('ULSCH in error in round', str(line))
if result is not None:
ulschFailure += 1
result = re.search('BAD all_segments_received', str(line))
if result is not None:
rlcDiscardBuffer += 1
result = re.search('Canceled RA procedure for UE rnti', str(line))
if result is not None:
rachCanceledProcedure += 1
result = re.search('dropping, not enough RBs', str(line))
if result is not None:
dropNotEnoughRBs += 1
logging.debug(' File analysis completed')
statMsg = 'eNB showed ' + str(uciStatMsgCount) + ' "uci->stat" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
self.htmleNBFailureMsg += statMsg + '\n'
if pdcpFailure > 0:
statMsg = 'eNB showed ' + str(pdcpFailure) + ' "PDCP Out of Resources" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
self.htmleNBFailureMsg += statMsg + '\n'
if ulschFailure > 0:
statMsg = 'eNB showed ' + str(ulschFailure) + ' "ULSCH in error in round" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
self.htmleNBFailureMsg += statMsg + '\n'
if dropNotEnoughRBs > 0:
statMsg = 'eNB showed ' + str(dropNotEnoughRBs) + ' "dropping, not enough RBs" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
self.htmleNBFailureMsg += statMsg + '\n'
if rrcSetupComplete > 0:
rrcMsg = 'eNB completed ' + str(rrcSetupComplete) + ' RRC Connection Setup(s)'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
if rrcReleaseRequest > 0:
rrcMsg = 'eNB requested ' + str(rrcReleaseRequest) + ' RRC Connection Release(s)'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
if rrcReconfigRequest > 0 or rrcReconfigComplete > 0:
rrcMsg = 'eNB requested ' + str(rrcReconfigRequest) + ' RRC Connection Reconfiguration(s)'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
rrcMsg = ' -- ' + str(rrcReconfigComplete) + ' were completed'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
if rrcReestablishRequest > 0 or rrcReestablishComplete > 0 or rrcReestablishReject > 0:
rrcMsg = 'eNB requested ' + str(rrcReestablishRequest) + ' RRC Connection Reestablishment(s)'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
rrcMsg = ' -- ' + str(rrcReestablishComplete) + ' were completed'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
rrcMsg = ' -- ' + str(rrcReestablishReject) + ' were rejected'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
if cdrxActivationMessageCount > 0:
rrcMsg = 'eNB activated the CDRX Configuration for ' + str(cdrxActivationMessageCount) + ' time(s)'
logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rrcMsg + '\n'
if rachCanceledProcedure > 0:
rachMsg = 'eNB cancelled ' + str(rachCanceledProcedure) + ' RA procedure(s)'
logging.debug('\u001B[1;30;43m ' + rachMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rachMsg + '\n'
Raphael Defosseux
committed
if isRRU:
if isSlave:
if slaveReceivesFrameResyncCmd:
rruMsg = 'Slave RRU received the RRU_frame_resynch command from RAU'
logging.debug('\u001B[1;30;43m ' + rruMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rruMsg + '\n'
else:
rruMsg = 'Slave RRU DID NOT receive the RRU_frame_resynch command from RAU'
logging.debug('\u001B[1;37;41m ' + rruMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rruMsg + '\n'
return ENB_PROCESS_SLAVE_RRU_NOT_SYNCED
if foundSegFault:
logging.debug('\u001B[1;37;41m eNB ended with a Segmentation Fault! \u001B[0m')
return ENB_PROCESS_SEG_FAULT
if foundAssertion:
logging.debug('\u001B[1;37;41m eNB ended with an assertion! \u001B[0m')
return ENB_PROCESS_ASSERTION
if foundRealTimeIssue:
logging.debug('\u001B[1;37;41m eNB faced real time issues! \u001B[0m')
self.htmleNBFailureMsg += 'eNB faced real time issues!\n'
#return ENB_PROCESS_REALTIME_ISSUE
if rlcDiscardBuffer > 0:
rlcMsg = 'eNB RLC discarded ' + str(rlcDiscardBuffer) + ' buffer(s)'
logging.debug('\u001B[1;37;41m ' + rlcMsg + ' \u001B[0m')
self.htmleNBFailureMsg += rlcMsg + '\n'
return ENB_PROCESS_REALTIME_ISSUE
def AnalyzeLogFile_UE(self, UElogFile):
if (not os.path.isfile('./' + UElogFile)):
return -1
ue_log_file = open('./' + UElogFile, 'r')
exitSignalReceived = False
foundAssertion = False
msgAssertion = ''
msgLine = 0
foundSegFault = False
foundRealTimeIssue = False
uciStatMsgCount = 0
pdcpDataReqFailedCount = 0
badDciCount = 0
rrcConnectionRecfgComplete = 0
no_cell_sync_found = False
mib_found = False
frequency_found = False
plmn_found = False
result = re.search('Exiting OAI softmodem', str(line))
exitSignalReceived = True
result = re.search('System error|[Ss]egmentation [Ff]ault|======= Backtrace: =========|======= Memory map: ========', str(line))
if result is not None and not exitSignalReceived:
foundSegFault = True
result = re.search('[Cc]ore [dD]ump', str(line))
if result is not None and not exitSignalReceived:
foundSegFault = True
result = re.search('./lte-uesoftmodem', str(line))
if result is not None and not exitSignalReceived:
foundSegFault = True
result = re.search('[Aa]ssertion', str(line))
if result is not None and not exitSignalReceived:
foundAssertion = True
result = re.search('LLL', str(line))
if result is not None and not exitSignalReceived:
foundRealTimeIssue = True
if foundAssertion and (msgLine < 3):
msgLine += 1
msgAssertion += str(line)
result = re.search('uci->stat', str(line))
if result is not None and not exitSignalReceived:
result = re.search('PDCP data request failed', str(line))
if result is not None and not exitSignalReceived:
pdcpDataReqFailedCount += 1
result = re.search('bad DCI 1A', str(line))
if result is not None and not exitSignalReceived:
badDciCount += 1
result = re.search('Generating RRCConnectionReconfigurationComplete', str(line))
if result is not None:
rrcConnectionRecfgComplete += 1
result = re.search('No cell synchronization found, abandoning', str(line))
if result is not None:
no_cell_sync_found = True
result = re.search("MIB Information => ([a-zA-Z]{1,10}), ([a-zA-Z]{1,10}), NidCell (?P<nidcell>\d{1,3}), N_RB_DL (?P<n_rb_dl>\d{1,3}), PHICH DURATION (?P<phich_duration>\d), PHICH RESOURCE (?P<phich_resource>.{1,4}), TX_ANT (?P<tx_ant>\d)", str(line))
if result is not None and (not mib_found):
mibMsg = "MIB Information: " + result.group(1) + ', ' + result.group(2)
self.htmlUEFailureMsg += mibMsg + '\n'
logging.debug('\033[94m' + mibMsg + '\033[0m')
mibMsg = " nidcell = " + result.group('nidcell')
self.htmlUEFailureMsg += mibMsg
logging.debug('\033[94m' + mibMsg + '\033[0m')
mibMsg = " n_rb_dl = " + result.group('n_rb_dl')
self.htmlUEFailureMsg += mibMsg + '\n'
logging.debug('\033[94m' + mibMsg + '\033[0m')
mibMsg = " phich_duration = " + result.group('phich_duration')
self.htmlUEFailureMsg += mibMsg
logging.debug('\033[94m' + mibMsg + '\033[0m')
mibMsg = " phich_resource = " + result.group('phich_resource')
self.htmlUEFailureMsg += mibMsg + '\n'
logging.debug('\033[94m' + mibMsg + '\033[0m')
mibMsg = " tx_ant = " + result.group('tx_ant')
self.htmlUEFailureMsg += mibMsg + '\n'
logging.debug('\033[94m' + mibMsg + '\033[0m')
mib_found = True
logging.error('\033[91m' + "MIB marker was not found" + '\033[0m')
result = re.search("Measured Carrier Frequency (?P<measured_carrier_frequency>\d{1,15}) Hz", str(line))
if result is not None and (not frequency_found):
mibMsg = "Measured Carrier Frequency = " + result.group('measured_carrier_frequency') + ' Hz'
self.htmlUEFailureMsg += mibMsg + '\n'
logging.debug('\033[94m' + mibMsg + '\033[0m')
frequency_found = True
logging.error('\033[91m' + "Measured Carrier Frequency not found" + '\033[0m')
result = re.search("PLMN MCC (?P<mcc>\d{1,3}), MNC (?P<mnc>\d{1,3}), TAC", str(line))
if result is not None and (not plmn_found):
try:
mibMsg = 'PLMN MCC = ' + result.group('mcc') + ' MNC = ' + result.group('mnc')
self.htmlUEFailureMsg += mibMsg + '\n'
logging.debug('\033[94m' + mibMsg + '\033[0m')
plmn_found = True
except Exception as e:
logging.error('\033[91m' + "PLMN not found" + '\033[0m')
result = re.search("Found (?P<operator>[\w,\s]{1,15}) \(name from internal table\)", str(line))
if result is not None:
try:
mibMsg = "The operator is: " + result.group('operator')
self.htmlUEFailureMsg += mibMsg + '\n'
logging.debug('\033[94m' + mibMsg + '\033[0m')
logging.error('\033[91m' + "Operator name not found" + '\033[0m')
result = re.search("SIB5 InterFreqCarrierFreq element (.{1,4})/(.{1,4})", str(line))
if result is not None:
try:
mibMsg = "SIB5 InterFreqCarrierFreq element " + result.group(1) + '/' + result.group(2)
self.htmlUEFailureMsg += mibMsg + ' -> '
logging.debug('\033[94m' + mibMsg + '\033[0m')
logging.error('\033[91m' + "SIB5 InterFreqCarrierFreq element not found" + '\033[0m')
result = re.search("DL Carrier Frequency/ARFCN : (?P<carrier_frequency>\d{1,15}/\d{1,4})", str(line))
if result is not None:
try:
freq = result.group('carrier_frequency')
new_freq = re.sub('/[0-9]+','',freq)
float_freq = float(new_freq) / 1000000
self.htmlUEFailureMsg += 'DL Freq: ' + ('%.1f' % float_freq) + ' MHz'
logging.debug('\033[94m' + " DL Carrier Frequency is: " + freq + '\033[0m')
logging.error('\033[91m' + " DL Carrier Frequency not found" + '\033[0m')
result = re.search("AllowedMeasBandwidth : (?P<allowed_bandwidth>\d{1,7})", str(line))
if result is not None:
try:
prb = result.group('allowed_bandwidth')
self.htmlUEFailureMsg += ' -- PRB: ' + prb + '\n'
logging.debug('\033[94m' + " AllowedMeasBandwidth: " + prb + '\033[0m')
logging.error('\033[91m' + " AllowedMeasBandwidth not found" + '\033[0m')
if rrcConnectionRecfgComplete > 0:
statMsg = 'UE connected to eNB (' + str(rrcConnectionRecfgComplete) + ' RRCConnectionReconfigurationComplete message(s) generated)'
logging.debug('\033[94m' + statMsg + '\033[0m')
self.htmlUEFailureMsg += statMsg + '\n'
if uciStatMsgCount > 0:
statMsg = 'UE showed ' + str(uciStatMsgCount) + ' "uci->stat" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
self.htmlUEFailureMsg += statMsg + '\n'
if pdcpDataReqFailedCount > 0:
statMsg = 'UE showed ' + str(pdcpDataReqFailedCount) + ' "PDCP data request failed" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
self.htmlUEFailureMsg += statMsg + '\n'
if badDciCount > 0:
statMsg = 'UE showed ' + str(badDciCount) + ' "bad DCI 1A" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
self.htmlUEFailureMsg += statMsg + '\n'
if foundSegFault:
logging.debug('\u001B[1;37;41m UE ended with a Segmentation Fault! \u001B[0m')
return ENB_PROCESS_SEG_FAULT
if foundAssertion:
logging.debug('\u001B[1;30;43m UE showed an assertion! \u001B[0m')
self.htmlUEFailureMsg += 'UE showed an assertion!\n'
if not mib_found or not frequency_found:
return OAI_UE_PROCESS_ASSERTION
if foundRealTimeIssue:
logging.debug('\u001B[1;37;41m UE faced real time issues! \u001B[0m')
self.htmlUEFailureMsg += 'UE faced real time issues!\n'
#return ENB_PROCESS_REALTIME_ISSUE
if no_cell_sync_found and not mib_found:
logging.debug('\u001B[1;37;41m UE could not synchronize ! \u001B[0m')
self.htmlUEFailureMsg += 'UE could not synchronize!\n'
return OAI_UE_PROCESS_COULD_NOT_SYNC
def TerminateeNB(self):
Raphael Defosseux
committed
if self.eNB_serverId == '0':
lIpAddr = self.eNBIPAddress
lUserName = self.eNBUserName
lPassWord = self.eNBPassword
lSourcePath = self.eNBSourceCodePath
elif self.eNB_serverId == '1':
lIpAddr = self.eNB1IPAddress
lUserName = self.eNB1UserName
lPassWord = self.eNB1Password
lSourcePath = self.eNB1SourceCodePath
elif self.eNB_serverId == '2':
lIpAddr = self.eNB2IPAddress
lUserName = self.eNB2UserName
lPassWord = self.eNB2Password
lSourcePath = self.eNB2SourceCodePath
if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(lIpAddr, lUserName, lPassWord)
self.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
self.command('stdbuf -o0 ps -aux | grep --color=never softmodem | grep -v grep', '\$', 5)
result = re.search('lte-softmodem', str(self.ssh.before))
if result is not None:
Raphael Defosseux
committed
self.command('echo ' + lPassWord + ' | sudo -S daemon --name=enb' + str(self.eNB_instance) + '_daemon --stop', '\$', 5)
self.command('echo ' + lPassWord + ' | sudo -S killall --signal SIGINT lte-softmodem || true', '\$', 5)
Raphael Defosseux
committed
time.sleep(5)
self.command('stdbuf -o0 ps -aux | grep --color=never softmodem | grep -v grep', '\$', 5)
result = re.search('lte-softmodem', str(self.ssh.before))
if result is not None:
Raphael Defosseux
committed
self.command('echo ' + lPassWord + ' | sudo -S killall --signal SIGKILL lte-softmodem || true', '\$', 5)
time.sleep(2)
self.command('rm -f my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5)
# If tracer options is on, stopping tshark on EPC side
result = re.search('T_stdout', str(self.Initialize_eNB_args))
if result is not None:
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
logging.debug('\u001B[1m Stopping tshark \u001B[0m')
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
time.sleep(1)
if self.EPC_PcapFileName != '':
self.command('echo ' + self.EPCPassword + ' | sudo -S chmod 666 /tmp/' + self.EPC_PcapFileName, '\$', 5)
self.copyin(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, '/tmp/' + self.EPC_PcapFileName, '.')
Raphael Defosseux
committed
self.copyout(lIpAddr, lUserName, lPassWord, self.EPC_PcapFileName, lSourcePath + '/cmake_targets/.')
logging.debug('\u001B[1m Replaying RAW record file\u001B[0m')
Raphael Defosseux
committed
self.open(lIpAddr, lUserName, lPassWord)
self.command('cd ' + lSourcePath + '/common/utils/T/tracer/', '\$', 5)
enbLogFile = self.eNBLogFiles[int(self.eNB_instance)]
raw_record_file = enbLogFile.replace('.log', '_record.raw')
replay_log_file = enbLogFile.replace('.log', '_replay.log')
extracted_txt_file = enbLogFile.replace('.log', '_extracted_messages.txt')
extracted_log_file = enbLogFile.replace('.log', '_extracted_messages.log')
self.command('./extract_config -i ' + lSourcePath + '/cmake_targets/' + raw_record_file + ' > ' + lSourcePath + '/cmake_targets/' + extracted_txt_file, '\$', 5)
self.command('echo $USER; nohup ./replay -i ' + lSourcePath + '/cmake_targets/' + raw_record_file + ' > ' + lSourcePath + '/cmake_targets/' + replay_log_file + ' 2>&1 &', lUserName, 5)
self.command('./textlog -d ' + lSourcePath + '/cmake_targets/' + extracted_txt_file + ' -no-gui -ON -full > ' + lSourcePath + '/cmake_targets/' + extracted_log_file, '\$', 5)
Raphael Defosseux
committed
self.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + extracted_log_file, '.')
logging.debug('\u001B[1m Analyzing eNB replay logfile \u001B[0m')
logStatus = self.AnalyzeLogFile_eNB(extracted_log_file)
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
Raphael Defosseux
committed
self.eNBLogFiles[int(self.eNB_instance)] = ''
Raphael Defosseux
committed
if self.eNBLogFiles[int(self.eNB_instance)] != '':
Raphael Defosseux
committed
fileToAnalyze = self.eNBLogFiles[int(self.eNB_instance)]
self.eNBLogFiles[int(self.eNB_instance)] = ''
Raphael Defosseux
committed
copyin_res = self.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + fileToAnalyze, '.')
Raphael Defosseux
committed
if (copyin_res == -1):
logging.debug('\u001B[1;37;41m Could not copy eNB logfile to analyze it! \u001B[0m')
self.htmleNBFailureMsg = 'Could not copy eNB logfile to analyze it!'
self.CreateHtmlTestRow('N/A', 'KO', ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
return
if self.eNB_serverId != '0':
self.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './' + fileToAnalyze, self.eNBSourceCodePath + '/cmake_targets/')
logging.debug('\u001B[1m Analyzing eNB logfile \u001B[0m ' + fileToAnalyze)
logStatus = self.AnalyzeLogFile_eNB(fileToAnalyze)
if (logStatus < 0):
self.CreateHtmlTestRow('N/A', 'KO', logStatus)
self.CreateHtmlTabFooter(False)
sys.exit(1)
else:
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
else:
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def TerminateHSS(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGINT run_hss oai_hss || true', '\$', 5)
time.sleep(2)
self.command('stdbuf -o0 ps -aux | grep hss | grep -v grep', '\$', 5)
result = re.search('\/bin\/bash .\/run_', str(self.ssh.before))
if result is not None:
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL run_hss oai_hss || true', '\$', 5)
else:
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S daemon --name=simulated_hss --stop', '\$', 5)
time.sleep(1)
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL hss_sim', '\$', 5)
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def TerminateMME(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGINT run_mme mme || true', '\$', 5)
time.sleep(2)
self.command('stdbuf -o0 ps -aux | grep mme | grep -v grep', '\$', 5)
result = re.search('\/bin\/bash .\/run_', str(self.ssh.before))
if result is not None:
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL run_mme mme || true', '\$', 5)
else:
self.command('cd /opt/ltebox/tools', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S ./stop_mme', '\$', 5)
self.close()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def TerminateSPGW(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGINT run_spgw spgw || true', '\$', 5)
time.sleep(2)
self.command('stdbuf -o0 ps -aux | grep spgw | grep -v grep', '\$', 5)
result = re.search('\/bin\/bash .\/run_', str(self.ssh.before))
if result is not None:
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL run_spgw spgw || true', '\$', 5)
else:
self.command('cd /opt/ltebox/tools', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S ./stop_xGw', '\$', 5)
self.close()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def TerminateFlexranCtrl(self):
if self.flexranCtrlInstalled == False or self.flexranCtrlStarted == False:
return
if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '':
Usage()
sys.exit('Insufficient Parameter')
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('echo ' + self.EPCPassword + ' | sudo -S daemon --name=flexran_rtc_daemon --stop', '\$', 5)
time.sleep(1)
self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL rt_controller', '\$', 5)
time.sleep(1)
self.close()
self.flexranCtrlStarted = False
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
def TerminateUE_common(self, device_id):
try:
self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
Raphael Defosseux
committed
# back in airplane mode on (ie radio off)
self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
logging.debug('\u001B[1mUE (' + device_id + ') Detach Completed\u001B[0m')
self.command('stdbuf -o0 adb -s ' + device_id + ' shell ps | grep --color=never iperf | grep -v grep', '\$', 5)
result = re.search('shell +(?P<pid>\d+)', str(self.ssh.before))
if result is not None:
pid_iperf = result.group('pid')
self.command('stdbuf -o0 adb -s ' + device_id + ' shell kill -KILL ' + pid_iperf, '\$', 5)
self.close()
except:
os.kill(os.getppid(),signal.SIGUSR1)
def TerminateUE(self):
terminate_ue_flag = True
self.GetAllUEDevices(terminate_ue_flag)
multi_jobs = []
for device_id in self.UEDevices:
p = Process(target= SSH.TerminateUE_common, args = (device_id,))
p.daemon = True
p.start()
multi_jobs.append(p)
for job in multi_jobs:
job.join()
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
Boris Djalal
committed
def TerminateOAIUE(self):
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('cd ' + self.UESourceCodePath + '/cmake_targets', '\$', 5)
self.command('ps -aux | grep --color=never softmodem | grep -v grep', '\$', 5)
Boris Djalal
committed
result = re.search('lte-uesoftmodem', str(self.ssh.before))
if result is not None:
self.command('echo ' + self.UEPassword + ' | sudo -S daemon --name=ue' + str(self.UE_instance) + '_daemon --stop', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S killall --signal SIGINT lte-uesoftmodem || true', '\$', 5)
Boris Djalal
committed
time.sleep(5)
self.command('ps -aux | grep --color=never softmodem | grep -v grep', '\$', 5)
result = re.search('lte-uesoftmodem', str(self.ssh.before))
if result is not None:
self.command('echo ' + self.UEPassword + ' | sudo -S killall --signal SIGKILL lte-uesoftmodem || true', '\$', 5)
time.sleep(2)
self.command('rm -f my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
Boris Djalal
committed
self.close()
result = re.search('ue_', str(self.UELogFile))
Boris Djalal
committed
if result is not None:
copyin_res = self.copyin(self.UEIPAddress, self.UEUserName, self.UEPassword, self.UESourceCodePath + '/cmake_targets/' + self.UELogFile, '.')
if (copyin_res == -1):
logging.debug('\u001B[1;37;41m Could not copy UE logfile to analyze it! \u001B[0m')
self.htmlUEFailureMsg = 'Could not copy UE logfile to analyze it!'
self.CreateHtmlTestRow('N/A', 'KO', OAI_UE_PROCESS_NOLOGFILE_TO_ANALYZE, 'UE')
Boris Djalal
committed
self.UELogFile = ''
return
logging.debug('\u001B[1m Analyzing UE logfile \u001B[0m')
logStatus = self.AnalyzeLogFile_UE(self.UELogFile)
result = re.search('--no-L2-connect', str(self.Initialize_OAI_UE_args))
if result is not None:
ueAction = 'Sniffing'
Boris Djalal
committed
else:
ueAction = 'Connection'
if (logStatus < 0):
logging.debug('\u001B[1m' + ueAction + ' Failed \u001B[0m')
self.htmlUEFailureMsg = '<b>' + ueAction + ' Failed</b>\n' + self.htmlUEFailureMsg
self.CreateHtmlTestRow('N/A', 'KO', logStatus, 'UE')
# In case of sniffing on commercial eNBs we have random results
# Not an error then
if (logStatus != OAI_UE_PROCESS_COULD_NOT_SYNC) or (ueAction != 'Sniffing'):
self.Initialize_OAI_UE_args = ''
self.AutoTerminateUEandeNB()
self.CreateHtmlTabFooter(False)
sys.exit(1)
else:
logging.debug('\u001B[1m' + ueAction + ' Completed \u001B[0m')
self.htmlUEFailureMsg = '<b>' + ueAction + ' Completed</b>\n' + self.htmlUEFailureMsg
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
self.UELogFile = ''
else:
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
Boris Djalal
committed
if (self.ADBIPAddress != 'none'):
self.testCase_id = 'AUTO-KILL-UE'
self.desc = 'Automatic Termination of UE'
self.ShowTestID()
self.TerminateUE()
if (self.Initialize_OAI_UE_args != ''):
self.testCase_id = 'AUTO-KILL-UE'
self.desc = 'Automatic Termination of UE'
self.ShowTestID()
self.TerminateOAIUE()
if (self.Initialize_eNB_args != ''):
self.testCase_id = 'AUTO-KILL-eNB'
self.desc = 'Automatic Termination of eNB'
self.ShowTestID()
self.eNB_instance = '0'
self.TerminateeNB()
def IdleSleep(self):
time.sleep(self.idle_sleep_time)
self.CreateHtmlTestRow(str(self.idle_sleep_time) + ' sec', 'OK', ALL_PROCESSES_OK)
def LogCollectBuild(self):
if (self.eNBIPAddress != '' and self.eNBUserName != '' and self.eNBPassword != ''):
IPAddress = self.eNBIPAddress
UserName = self.eNBUserName
Password = self.eNBPassword
SourceCodePath = self.eNBSourceCodePath
elif (self.UEIPAddress != '' and self.UEUserName != '' and self.UEPassword != ''):
IPAddress = self.UEIPAddress
UserName = self.UEUserName
Password = self.UEPassword
SourceCodePath = self.UESourceCodePath
self.open(IPAddress, UserName, Password)
self.command('cd ' + SourceCodePath, '\$', 5)
self.command('cd cmake_targets', '\$', 5)
self.command('zip build.log.zip build_log_*/*', '\$', 60)
self.close()
def LogCollecteNB(self):
self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
self.command('cd ' + self.eNBSourceCodePath, '\$', 5)
self.command('cd cmake_targets', '\$', 5)
self.command('echo ' + self.eNBPassword + ' | sudo -S rm -f enb.log.zip', '\$', 5)
self.command('echo ' + self.eNBPassword + ' | sudo -S zip enb.log.zip enb*.log core* enb_*record.raw enb_*.pcap enb_*txt', '\$', 60)
self.command('echo ' + self.eNBPassword + ' | sudo -S rm enb*.log core* enb_*record.raw enb_*.pcap enb_*txt', '\$', 5)
def LogCollectPing(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
self.command('zip ping.log.zip ping*.log', '\$', 60)
self.command('rm ping*.log', '\$', 5)
self.close()
def LogCollectIperf(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
self.command('zip iperf.log.zip iperf*.log', '\$', 60)
self.command('rm iperf*.log', '\$', 5)
self.close()
def LogCollectHSS(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('zip hss.log.zip hss*.log', '\$', 60)
self.command('rm hss*.log', '\$', 5)
else:
self.command('cp /opt/hss_sim0609/hss.log .', '\$', 60)
self.command('zip hss.log.zip hss.log', '\$', 60)
def LogCollectMME(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('zip mme.log.zip mme*.log', '\$', 60)
self.command('rm mme*.log', '\$', 5)
else:
self.command('cp /opt/ltebox/var/log/*Log.0 .', '\$', 5)
self.command('zip mme.log.zip mmeLog.0 s1apcLog.0 s1apsLog.0 s11cLog.0 libLog.0 s1apCodecLog.0', '\$', 60)
def LogCollectSPGW(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('cd scripts', '\$', 5)
if re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('zip spgw.log.zip spgw*.log', '\$', 60)
self.command('rm spgw*.log', '\$', 5)
else:
self.command('cp /opt/ltebox/var/log/xGwLog.0 .', '\$', 5)
self.command('zip spgw.log.zip xGwLog.0', '\$', 60)
def LogCollectOAIUE(self):
self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
self.command('cd ' + self.UESourceCodePath, '\$', 5)
self.command('cd cmake_targets', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S rm -f ue.log.zip', '\$', 5)
self.command('echo ' + self.UEPassword + ' | sudo -S zip ue.log.zip ue*.log core* ue_*record.raw ue_*.pcap ue_*txt', '\$', 60)
self.command('echo ' + self.UEPassword + ' | sudo -S rm ue*.log core* ue_*record.raw ue_*.pcap ue_*txt', '\$', 5)
self.close()
def RetrieveSystemVersion(self, machine):
if self.eNBIPAddress == 'none' or self.UEIPAddress == 'none':
self.OsVersion = 'Ubuntu 16.04.5 LTS'
self.KernelVersion = '4.15.0-45-generic'
self.UhdVersion = '3.13.0.1-0'
self.UsrpBoard = 'B210'
self.CpuNb = '4'
self.CpuModel = 'Intel(R) Core(TM) i5-6200U'
self.CpuMHz = '2399.996 MHz'
return 0
if machine == 'eNB':
if self.eNBIPAddress != '' and self.eNBUserName != '' and self.eNBPassword != '':
IPAddress = self.eNBIPAddress
UserName = self.eNBUserName
Password = self.eNBPassword
else:
return -1
if machine == 'UE':
if self.UEIPAddress != '' and self.UEUserName != '' and self.UEPassword != '':
IPAddress = self.UEIPAddress
UserName = self.UEUserName
Password = self.UEPassword
else:
return -1
self.open(IPAddress, UserName, Password)
self.command('lsb_release -a', '\$', 5)
result = re.search('Description:\\\\t(?P<os_type>[a-zA-Z0-9\-\_\.\ ]+)', str(self.ssh.before))
if result is not None:
self.OsVersion = result.group('os_type')
logging.debug('OS is: ' + self.OsVersion)
self.command('uname -r', '\$', 5)
result = re.search('uname -r\\\\r\\\\n(?P<kernel_version>[a-zA-Z0-9\-\_\.]+)', str(self.ssh.before))
if result is not None:
self.KernelVersion = result.group('kernel_version')
logging.debug('Kernel Version is: ' + self.KernelVersion)
Raphael Defosseux
committed
self.command('dpkg --list | egrep --color=never libuhd003', '\$', 5)
result = re.search('libuhd003:amd64 *(?P<uhd_version>[0-9\.]+)', str(self.ssh.before))
if result is not None:
self.UhdVersion = result.group('uhd_version')
logging.debug('UHD Version is: ' + self.UhdVersion)
self.command('echo ' + Password + ' | sudo -S uhd_find_devices', '\$', 15)
result = re.search('product: (?P<usrp_board>[0-9A-Za-z]+)\\\\r\\\\n', str(self.ssh.before))
if result is not None:
self.UsrpBoard = result.group('usrp_board')
logging.debug('USRP Board is: ' + self.UsrpBoard)
self.command('lscpu', '\$', 5)
result = re.search('CPU\(s\): *(?P<nb_cpus>[0-9]+).*Model name: *(?P<model>[a-zA-Z0-9\-\_\.\ \(\)]+).*CPU MHz: *(?P<cpu_mhz>[0-9\.]+)', str(self.ssh.before))
if result is not None:
self.CpuNb = result.group('nb_cpus')
logging.debug('nb_cpus: ' + self.CpuNb)
self.CpuModel = result.group('model')
logging.debug('model: ' + self.CpuModel)
self.CpuMHz = result.group('cpu_mhz') + ' MHz'
logging.debug('cpu_mhz: ' + self.CpuMHz)
#-----------------------------------------------------------
# HTML Reporting....
#-----------------------------------------------------------
def CreateHtmlHeader(self):
if (not self.htmlHeaderCreated):
logging.debug('\u001B[1m----------------------------------------\u001B[0m')
logging.debug('\u001B[1m Creating HTML header \u001B[0m')
logging.debug('\u001B[1m----------------------------------------\u001B[0m')
self.htmlFile = open('test_results.html', 'w')
self.htmlFile.write('<!DOCTYPE html>\n')
self.htmlFile.write('<html class="no-js" lang="en-US">\n')
self.htmlFile.write('<head>\n')
self.htmlFile.write(' <meta name="viewport" content="width=device-width, initial-scale=1">\n')
self.htmlFile.write(' <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">\n')
self.htmlFile.write(' <script src="https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>\n')
self.htmlFile.write(' <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>\n')
self.htmlFile.write(' <title>Test Results for TEMPLATE_JOB_NAME job build #TEMPLATE_BUILD_ID</title>\n')
self.htmlFile.write('</head>\n')
self.htmlFile.write('<body><div class="container">\n')
self.htmlFile.write(' <br>\n')
self.htmlFile.write(' <table style="border-collapse: collapse; border: none;">\n')
self.htmlFile.write(' <tr style="border-collapse: collapse; border: none;">\n')
self.htmlFile.write(' <td style="border-collapse: collapse; border: none;">\n')
self.htmlFile.write(' <a href="http://www.openairinterface.org/">\n')
self.htmlFile.write(' <img src="http://www.openairinterface.org/wp-content/uploads/2016/03/cropped-oai_final_logo2.png" alt="" border="none" height=50 width=150>\n')
self.htmlFile.write(' </img>\n')
self.htmlFile.write(' </a>\n')
self.htmlFile.write(' </td>\n')
self.htmlFile.write(' <td style="border-collapse: collapse; border: none; vertical-align: center;">\n')
self.htmlFile.write(' <b><font size = "6">Job Summary -- Job: TEMPLATE_JOB_NAME -- Build-ID: TEMPLATE_BUILD_ID</font></b>\n')
self.htmlFile.write(' </td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' </table>\n')
self.htmlFile.write(' <br>\n')
self.htmlFile.write(' <div class="alert alert-info"><strong> <span class="glyphicon glyphicon-dashboard"></span> TEMPLATE_STAGE_NAME</strong></div>\n')
self.htmlFile.write(' <table border = "1">\n')
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-time"></span> Build Start Time (UTC) </td>\n')
self.htmlFile.write(' <td>TEMPLATE_BUILD_TIME</td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-cloud-upload"></span> GIT Repository </td>\n')
self.htmlFile.write(' <td><a href="' + self.ranRepository + '">' + self.ranRepository + '</a></td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-wrench"></span> Job Trigger </td>\n')
if (self.ranAllowMerge):
self.htmlFile.write(' <td>Merge-Request</td>\n')
else:
self.htmlFile.write(' <td>Push to Branch</td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' <tr>\n')
if (self.ranAllowMerge):
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-log-out"></span> Source Branch </td>\n')
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-tree-deciduous"></span> Branch</td>\n')
self.htmlFile.write(' <td>' + self.ranBranch + '</td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' <tr>\n')
if (self.ranAllowMerge):
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-tag"></span> Source Commit ID </td>\n')
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-tag"></span> Commit ID </td>\n')
self.htmlFile.write(' <td>' + self.ranCommitID + '</td>\n')
if self.ranAllowMerge != '':
commit_message = subprocess.check_output("git log -n1 --pretty=format:\"%s\" " + self.ranCommitID, shell=True, universal_newlines=True)
commit_message = commit_message.strip()
self.htmlFile.write(' <tr>\n')
if (self.ranAllowMerge):
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-comment"></span> Source Commit Message </td>\n')
else:
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-comment"></span> Commit Message </td>\n')
self.htmlFile.write(' <td>' + commit_message + '</td>\n')
self.htmlFile.write(' </tr>\n')
if (self.ranAllowMerge):
self.htmlFile.write(' <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-log-in"></span> Target Branch </td>\n')
if (self.ranTargetBranch == ''):
self.htmlFile.write(' <td>develop</td>\n')
else:
self.htmlFile.write(' <td>' + self.ranTargetBranch + '</td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' </table>\n')
if (self.ADBIPAddress != 'none'):
self.GetAllUEDevices(terminate_ue_flag)
self.GetAllCatMDevices(terminate_ue_flag)
self.htmlUEConnected = len(self.UEDevices)
self.htmlFile.write(' <h2><span class="glyphicon glyphicon-phone"></span> <span class="glyphicon glyphicon-menu-right"></span> ' + str(len(self.UEDevices)) + ' UE(s) is(are) connected to ADB bench server</h2>\n')
self.htmlFile.write(' <h2><span class="glyphicon glyphicon-phone"></span> <span class="glyphicon glyphicon-menu-right"></span> ' + str(len(self.CatMDevices)) + ' CAT-M UE(s) is(are) connected to bench server</h2>\n')
else:
self.UEDevices.append('OAI-UE')
self.htmlUEConnected = len(self.UEDevices)
self.htmlFile.write(' <h2><span class="glyphicon glyphicon-phone"></span> <span class="glyphicon glyphicon-menu-right"></span> ' + str(len(self.UEDevices)) + ' OAI UE(s) is(are) connected to CI bench</h2>\n')
self.htmlFile.write(' <ul class="nav nav-pills">\n')
count = 0
while (count < self.nbTestXMLfiles):
pillMsg = ' <li><a data-toggle="pill" href="#'
pillMsg += self.htmlTabRefs[count]
pillMsg += '">'
pillMsg += self.htmlTabNames[count]
pillMsg += ' <span class="glyphicon glyphicon-'
pillMsg += self.htmlTabIcons[count]
pillMsg += '"></span></a></li>\n'
self.htmlFile.write(pillMsg)
count += 1
self.htmlFile.write(' </ul>\n')
self.htmlFile.write(' <div class="tab-content">\n')
self.htmlFile.close()
def CreateHtmlTabHeader(self):
if (not self.htmlHeaderCreated):
if (not os.path.isfile('test_results.html')):
self.CreateHtmlHeader()
self.htmlFile = open('test_results.html', 'a')
if (self.nbTestXMLfiles == 1):
self.htmlFile.write(' <div id="' + self.htmlTabRefs[0] + '" class="tab-pane fade">\n')
self.htmlFile.write(' <h3>Test Summary for <span class="glyphicon glyphicon-file"></span> ' + self.testXMLfiles[0] + '</h3>\n')
else:
self.htmlFile.write(' <div id="build-tab" class="tab-pane fade">\n')
self.htmlFile.write(' <table class="table" border = "1">\n')
self.htmlFile.write(' <tr bgcolor = "#33CCFF" >\n')
self.htmlFile.write(' <th>Test Id</th>\n')
self.htmlFile.write(' <th>Test Desc</th>\n')
self.htmlFile.write(' <th>Test Options</th>\n')
self.htmlFile.write(' <th>Test Status</th>\n')
if (self.htmlUEConnected == -1):
terminate_ue_flag = True
if (self.ADBIPAddress != 'none'):
self.GetAllUEDevices(terminate_ue_flag)
self.GetAllCatMDevices(terminate_ue_flag)
else:
self.UEDevices.append('OAI-UE')
self.htmlUEConnected = len(self.UEDevices)
i = 0
while (i < self.htmlUEConnected):
self.htmlFile.write(' <th>UE' + str(i) + ' Status</th>\n')
i += 1
self.htmlFile.write(' </tr>\n')
self.htmlHeaderCreated = True
def CreateHtmlTabFooter(self, passStatus):
if ((not self.htmlFooterCreated) and (self.htmlHeaderCreated)):
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <th bgcolor = "#33CCFF" colspan=2>Final Tab Status</th>\n')
self.htmlFile.write(' <th bgcolor = "green" colspan=' + str(2 + self.htmlUEConnected) + '><font color="white">PASS <span class="glyphicon glyphicon-ok"></span> </font></th>\n')
self.htmlFile.write(' <th bgcolor = "red" colspan=' + str(2 + self.htmlUEConnected) + '><font color="white">FAIL <span class="glyphicon glyphicon-remove"></span> </font></th>\n')
self.htmlFile.write(' </div>\n')
self.htmlFooterCreated = False
def CreateHtmlFooter(self, passStatus):
if (os.path.isfile('test_results.html')):
logging.debug('\u001B[1m----------------------------------------\u001B[0m')
logging.debug('\u001B[1m Creating HTML footer \u001B[0m')
logging.debug('\u001B[1m----------------------------------------\u001B[0m')
self.htmlFile = open('test_results.html', 'a')
self.htmlFile.write('</div>\n')
self.htmlFile.write(' <p></p>\n')
self.htmlFile.write(' <table class="table table-condensed">\n')
3587
3588
3589
3590
3591
3592
3593
3594
3595
3596
3597
3598
3599
3600
3601
3602
3603
3604
3605
3606
3607
3608
3609
3610
3611
3612
3613
3614
3615
machines = [ 'eNB', 'UE' ]
for machine in machines:
res = self.RetrieveSystemVersion(machine)
if res == -1:
continue
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <th colspan=8>' + str(machine) + ' Server Characteristics</th>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <td>OS Version</td>\n')
self.htmlFile.write(' <td><span class="label label-default">' + self.OsVersion + '</span></td>\n')
self.htmlFile.write(' <td>Kernel Version</td>\n')
self.htmlFile.write(' <td><span class="label label-default">' + self.KernelVersion + '</span></td>\n')
self.htmlFile.write(' <td>UHD Version</td>\n')
self.htmlFile.write(' <td><span class="label label-default">' + self.UhdVersion + '</span></td>\n')
self.htmlFile.write(' <td>USRP Board</td>\n')
self.htmlFile.write(' <td><span class="label label-default">' + self.UsrpBoard + '</span></td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <td>Nb CPUs</td>\n')
self.htmlFile.write(' <td><span class="label label-default">' + self.CpuNb + '</span></td>\n')
self.htmlFile.write(' <td>CPU Model Name</td>\n')
self.htmlFile.write(' <td><span class="label label-default">' + self.CpuModel + '</span></td>\n')
self.htmlFile.write(' <td>CPU Frequency</td>\n')
self.htmlFile.write(' <td><span class="label label-default">' + self.CpuMHz + '</span></td>\n')
self.htmlFile.write(' <td></td>\n')
self.htmlFile.write(' <td></td>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <th colspan=5 bgcolor = "#33CCFF">Final Status</th>\n')
self.htmlFile.write(' <th colspan=3 bgcolor="green"><font color="white">PASS <span class="glyphicon glyphicon-ok"></span></font></th>\n')
self.htmlFile.write(' <th colspan=3 bgcolor="red"><font color="white">FAIL <span class="glyphicon glyphicon-remove"></span> </font></th>\n')
self.htmlFile.write(' </tr>\n')
self.htmlFile.write(' </table>\n')
self.htmlFile.write(' <p></p>\n')
self.htmlFile.write(' <div class="well well-lg">End of Test Report -- Copyright <span class="glyphicon glyphicon-copyright-mark"></span> 2018 <a href="http://www.openairinterface.org/">OpenAirInterface</a>. All Rights Reserved.</div>\n')
self.htmlFile.write('</div></body>\n')
self.htmlFile.write('</html>\n')
self.htmlFile.close()
def CreateHtmlTestRow(self, options, status, processesStatus, machine='eNB'):
if ((not self.htmlFooterCreated) and (self.htmlHeaderCreated)):
self.htmlFile.write(' <tr>\n')
self.htmlFile.write(' <td bgcolor = "lightcyan" >' + self.testCase_id + '</td>\n')
self.htmlFile.write(' <td>' + self.desc + '</td>\n')
self.htmlFile.write(' <td>' + str(options) + '</td>\n')
if (str(status) == 'OK'):
self.htmlFile.write(' <td bgcolor = "lightgreen" >' + str(status) + '</td>\n')
elif (str(status) == 'KO'):
if (processesStatus == 0):
self.htmlFile.write(' <td bgcolor = "lightcoral" >' + str(status) + '</td>\n')
elif (processesStatus == ENB_PROCESS_FAILED):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - eNB process not found</td>\n')
elif (processesStatus == OAI_UE_PROCESS_FAILED):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - OAI UE process not found</td>\n')
elif (processesStatus == ENB_PROCESS_SEG_FAULT):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - ' + machine + ' process ended in Segmentation Fault</td>\n')
elif (processesStatus == ENB_PROCESS_ASSERTION) or (processesStatus == OAI_UE_PROCESS_ASSERTION):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - ' + machine + ' process ended in Assertion</td>\n')
elif (processesStatus == ENB_PROCESS_REALTIME_ISSUE):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - ' + machine + ' process faced Real Time issue(s)</td>\n')
elif (processesStatus == ENB_PROCESS_NOLOGFILE_TO_ANALYZE) or (processesStatus == OAI_UE_PROCESS_NOLOGFILE_TO_ANALYZE):
self.htmlFile.write(' <td bgcolor = "orange" >OK?</td>\n')
Raphael Defosseux
committed
elif (processesStatus == ENB_PROCESS_SLAVE_RRU_NOT_SYNCED):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - ' + machine + ' Slave RRU could not synch</td>\n')
elif (processesStatus == OAI_UE_PROCESS_COULD_NOT_SYNC):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - UE could not sync</td>\n')
elif (processesStatus == HSS_PROCESS_FAILED):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - HSS process not found</td>\n')
elif (processesStatus == MME_PROCESS_FAILED):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - MME process not found</td>\n')
elif (processesStatus == SPGW_PROCESS_FAILED):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - SPGW process not found</td>\n')
elif (processesStatus == UE_IP_ADDRESS_ISSUE):
self.htmlFile.write(' <td bgcolor = "lightcoral" >KO - Could not retrieve UE IP address</td>\n')
else:
self.htmlFile.write(' <td bgcolor = "lightcoral" >' + str(status) + '</td>\n')
else:
self.htmlFile.write(' <td bgcolor = "orange" >' + str(status) + '</td>\n')
cellBgColor = 'white'
result = re.search('ended with|faced real time issues', self.htmleNBFailureMsg)
if result is not None:
cellBgColor = 'red'
else:
Raphael Defosseux
committed
result = re.search('showed|Reestablishment|Could not copy eNB logfile', self.htmleNBFailureMsg)
if result is not None:
cellBgColor = 'orange'
self.htmlFile.write(' <td bgcolor = "' + cellBgColor + '" colspan=' + str(self.htmlUEConnected) + '><pre style="background-color:' + cellBgColor + '">' + self.htmleNBFailureMsg + '</pre></td>\n')
elif (len(str(self.htmlUEFailureMsg)) > 2):
cellBgColor = 'white'
result = re.search('ended with|faced real time issues', self.htmlUEFailureMsg)
if result is not None:
cellBgColor = 'red'
else:
result = re.search('showed|Could not copy UE logfile|oaitun_ue1 interface is either NOT mounted or NOT configured', self.htmlUEFailureMsg)
if result is not None:
cellBgColor = 'orange'
self.htmlFile.write(' <td bgcolor = "' + cellBgColor + '" colspan=' + str(self.htmlUEConnected) + '><pre style="background-color:' + cellBgColor + '">' + self.htmlUEFailureMsg + '</pre></td>\n')
self.htmlUEFailureMsg = ''
else:
i = 0
while (i < self.htmlUEConnected):
self.htmlFile.write(' <td>-</td>\n')
i += 1
def CreateHtmlTestRowQueue(self, options, status, ue_status, ue_queue):
if ((not self.htmlFooterCreated) and (self.htmlHeaderCreated)):
self.htmlFile.write(' <td bgcolor = "lightcyan" >' + self.testCase_id + '</td>\n')
self.htmlFile.write(' <td>' + self.desc + '</td>\n')
self.htmlFile.write(' <td>' + str(options) + '</td>\n')
if (str(status) == 'OK'):
self.htmlFile.write(' <td bgcolor = "lightgreen" >' + str(status) + '</td>\n')
elif (str(status) == 'KO'):
self.htmlFile.write(' <td bgcolor = "lightcoral" >' + str(status) + '</td>\n')
else:
self.htmlFile.write(' <td bgcolor = "orange" >' + str(status) + '</td>\n')
i = 0
while (i < self.htmlUEConnected):
if (i < ue_status):
if (not ue_queue.empty()):
self.htmlFile.write(' <td bgcolor = "orange" >' + str(ue_queue.get()).replace('white', 'orange') + '</td>\n')
else:
self.htmlFile.write(' <td>' + str(ue_queue.get()) + '</td>\n')
else:
self.htmlFile.write(' <td>-</td>\n')
else:
self.htmlFile.write(' <td>-</td>\n')
i += 1
self.htmlFile.write(' </tr>\n')
#-----------------------------------------------------------
# ShowTestID()
#-----------------------------------------------------------
def ShowTestID(self):
logging.debug('\u001B[1m----------------------------------------\u001B[0m')
logging.debug('\u001B[1mTest ID:' + self.testCase_id + '\u001B[0m')
logging.debug('\u001B[1m' + self.desc + '\u001B[0m')
logging.debug('\u001B[1m----------------------------------------\u001B[0m')
#-----------------------------------------------------------
# Usage()
#-----------------------------------------------------------
def Usage():
print('------------------------------------------------------------')
print('main.py Ver:' + Version)
print('------------------------------------------------------------')
print('Usage: python main.py [options]')
print(' --help Show this help.')
print(' --mode=[Mode]')
print(' TesteNB')
print(' InitiateHtml, FinalizeHtml')
print(' TerminateeNB, TerminateUE, TerminateHSS, TerminateMME, TerminateSPGW')
print(' LogCollectBuild, LogCollecteNB, LogCollectHSS, LogCollectMME, LogCollectSPGW, LogCollectPing, LogCollectIperf')
print(' --eNBRepository=[eNB\'s Repository URL] or --ranRepository=[OAI RAN Repository URL]')
print(' --eNBBranch=[eNB\'s Branch Name] or --ranBranch=[OAI RAN Repository Branch')
print(' --eNBCommitID=[eNB\'s Commit Number] or --ranCommitID=[OAI RAN Repository Commit SHA-1')
print(' --eNB_AllowMerge=[eNB\'s Allow Merge Request (with target branch)] or --ranAllowMerge=true/false')
print(' --eNBTargetBranch=[eNB\'s Target Branch in case of a Merge Request] or --ranTargetBranch=[Target Branch]')
print(' --eNBIPAddress=[eNB\'s IP Address]')
print(' --eNBUserName=[eNB\'s Login User Name]')
print(' --eNBPassword=[eNB\'s Login Password]')
print(' --eNBSourceCodePath=[eNB\'s Source Code Path]')
print(' --EPCIPAddress=[EPC\'s IP Address]')
print(' --EPCUserName=[EPC\'s Login User Name]')
print(' --EPCPassword=[EPC\'s Login Password]')
print(' --EPCSourceCodePath=[EPC\'s Source Code Path]')
print(' --EPCType=[EPC\'s Type: OAI or ltebox]')
print(' --ADBIPAddress=[ADB\'s IP Address]')
print(' --ADBUserName=[ADB\'s Login User Name]')
print(' --ADBPassword=[ADB\'s Login Password]')
print(' --XMLTestFile=[XML Test File to be run]')
print('------------------------------------------------------------')
def CheckClassValidity(action,id):
if action != 'Build_eNB' and action != 'WaitEndBuild_eNB' and action != 'Initialize_eNB' and action != 'Terminate_eNB' and action != 'Initialize_UE' and action != 'Terminate_UE' and action != 'Attach_UE' and action != 'Detach_UE' and action != 'Build_OAI_UE' and action != 'Initialize_OAI_UE' and action != 'Terminate_OAI_UE' and action != 'DataDisable_UE' and action != 'DataEnable_UE' and action != 'CheckStatusUE' and action != 'Ping' and action != 'Iperf' and action != 'Reboot_UE' and action != 'Initialize_FlexranCtrl' and action != 'Terminate_FlexranCtrl' and action != 'Initialize_HSS' and action != 'Terminate_HSS' and action != 'Initialize_MME' and action != 'Terminate_MME' and action != 'Initialize_SPGW' and action != 'Terminate_SPGW' and action != 'Initialize_CatM_module' and action != 'Terminate_CatM_module' and action != 'Attach_CatM_module' and action != 'Detach_CatM_module' and action != 'Ping_CatM_module' and action != 'IdleSleep':
logging.debug('ERROR: test-case ' + id + ' has wrong class ' + action)
return False
return True
def GetParametersFromXML(action):
if action == 'Build_eNB':
SSH.Build_eNB_args = test.findtext('Build_eNB_args')
SSH.eNB_instance = test.findtext('eNB_instance')
if (SSH.eNB_instance is None):
SSH.eNB_instance = '0'
SSH.eNB_serverId = test.findtext('eNB_serverId')
if (SSH.eNB_serverId is None):
SSH.eNB_serverId = '0'
xmlBgBuildField = test.findtext('backgroundBuild')
if (xmlBgBuildField is None):
SSH.backgroundBuild = False
else:
if re.match('true', xmlBgBuildField, re.IGNORECASE):
SSH.backgroundBuild = True
else:
SSH.backgroundBuild = False
if action == 'WaitEndBuild_eNB':
SSH.Build_eNB_args = test.findtext('Build_eNB_args')
SSH.eNB_instance = test.findtext('eNB_instance')
if (SSH.eNB_instance is None):
SSH.eNB_instance = '0'
SSH.eNB_serverId = test.findtext('eNB_serverId')
if (SSH.eNB_serverId is None):
SSH.eNB_serverId = '0'
if action == 'Initialize_eNB':
SSH.Initialize_eNB_args = test.findtext('Initialize_eNB_args')
SSH.eNB_instance = test.findtext('eNB_instance')
if (SSH.eNB_instance is None):
SSH.eNB_instance = '0'
Raphael Defosseux
committed
SSH.eNB_serverId = test.findtext('eNB_serverId')
if (SSH.eNB_serverId is None):
SSH.eNB_serverId = '0'
if action == 'Terminate_eNB':
SSH.eNB_instance = test.findtext('eNB_instance')
if (SSH.eNB_instance is None):
SSH.eNB_instance = '0'
Raphael Defosseux
committed
SSH.eNB_serverId = test.findtext('eNB_serverId')
if (SSH.eNB_serverId is None):
SSH.eNB_serverId = '0'
if action == 'Attach_UE':
nbMaxUEtoAttach = test.findtext('nbMaxUEtoAttach')
if (nbMaxUEtoAttach is None):
SSH.nbMaxUEtoAttach = -1
else:
SSH.nbMaxUEtoAttach = int(nbMaxUEtoAttach)
if action == 'CheckStatusUE':
expectedNBUE = test.findtext('expectedNbOfConnectedUEs')
if (expectedNBUE is None):
SSH.expectedNbOfConnectedUEs = -1
else:
SSH.expectedNbOfConnectedUEs = int(expectedNBUE)
if action == 'Build_OAI_UE':
SSH.Build_OAI_UE_args = test.findtext('Build_OAI_UE_args')
if action == 'Initialize_OAI_UE':
SSH.Initialize_OAI_UE_args = test.findtext('Initialize_OAI_UE_args')
SSH.UE_instance = test.findtext('UE_instance')
if (SSH.UE_instance is None):
SSH.UE_instance = '0'
if action == 'Terminate_OAI_UE':
SSH.eNB_instance = test.findtext('UE_instance')
if (SSH.UE_instance is None):
SSH.UE_instance = '0'
if action == 'Ping' or action == 'Ping_CatM_module':
SSH.ping_args = test.findtext('ping_args')
SSH.ping_packetloss_threshold = test.findtext('ping_packetloss_threshold')
if action == 'Iperf':
SSH.iperf_args = test.findtext('iperf_args')
SSH.iperf_packetloss_threshold = test.findtext('iperf_packetloss_threshold')
SSH.iperf_profile = test.findtext('iperf_profile')
if (SSH.iperf_profile is None):
SSH.iperf_profile = 'balanced'
else:
if SSH.iperf_profile != 'balanced' and SSH.iperf_profile != 'unbalanced' and SSH.iperf_profile != 'single-ue':
logging.debug('ERROR: test-case has wrong profile ' + SSH.iperf_profile)
SSH.iperf_profile = 'balanced'
if action == 'IdleSleep':
string_field = test.findtext('idle_sleep_time_in_sec')
if (string_field is None):
SSH.idle_sleep_time = 5
else:
SSH.idle_sleep_time = int(string_field)
#check if given test is in list
#it is in list if one of the strings in 'list' is at the beginning of 'test'
def test_in_list(test, list):
for check in list:
check=check.replace('+','')
if (test.startswith(check)):
return True
return False
def receive_signal(signum, frame):
sys.exit(1)
#-----------------------------------------------------------
# Parameter Check
#-----------------------------------------------------------
mode = ''
SSH = SSHConnection()
argvs = sys.argv
argc = len(argvs)
cwd = os.getcwd()
while len(argvs) > 1:
myArgv = argvs.pop(1) # 0th is this file's name
if re.match('^\-\-help$', myArgv, re.IGNORECASE):
Usage()
sys.exit(0)
elif re.match('^\-\-mode=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-mode=(.+)$', myArgv, re.IGNORECASE)
mode = matchReg.group(1)
elif re.match('^\-\-eNBRepository=(.+)$|^\-\-ranRepository(.+)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBRepository=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBRepository=(.+)$', myArgv, re.IGNORECASE)
else:
matchReg = re.match('^\-\-ranRepository=(.+)$', myArgv, re.IGNORECASE)
SSH.ranRepository = matchReg.group(1)
elif re.match('^\-\-eNB_AllowMerge=(.+)$|^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE)
else:
matchReg = re.match('^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE)
doMerge = matchReg.group(1)
if ((doMerge == 'true') or (doMerge == 'True')):
3913
3914
3915
3916
3917
3918
3919
3920
3921
3922
3923
3924
3925
3926
3927
3928
3929
3930
3931
3932
3933
3934
3935
3936
3937
3938
3939
3940
3941
3942
3943
3944
3945
3946
3947
3948
3949
3950
3951
3952
3953
3954
3955
3956
3957
3958
3959
3960
3961
3962
3963
3964
3965
3966
3967
3968
3969
3970
3971
SSH.ranAllowMerge = True
elif re.match('^\-\-eNBBranch=(.+)$|^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE)
else:
matchReg = re.match('^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE)
SSH.ranBranch = matchReg.group(1)
elif re.match('^\-\-eNBCommitID=(.*)$|^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE)
else:
matchReg = re.match('^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE)
SSH.ranCommitID = matchReg.group(1)
elif re.match('^\-\-eNBTargetBranch=(.*)$|^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE)
else:
matchReg = re.match('^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE)
SSH.ranTargetBranch = matchReg.group(1)
elif re.match('^\-\-eNBIPAddress=(.+)$|^\-\-eNB[1-2]IPAddress=(.+)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE)
SSH.eNBIPAddress = matchReg.group(1)
elif re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB1IPAddress = matchReg.group(1)
elif re.match('^\-\-eNB2IPAddress=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB2IPAddress=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB2IPAddress = matchReg.group(1)
elif re.match('^\-\-eNBUserName=(.+)$|^\-\-eNB[1-2]UserName=(.+)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBUserName=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBUserName=(.+)$', myArgv, re.IGNORECASE)
SSH.eNBUserName = matchReg.group(1)
elif re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB1UserName = matchReg.group(1)
elif re.match('^\-\-eNB2UserName=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB2UserName=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB2UserName = matchReg.group(1)
elif re.match('^\-\-eNBPassword=(.+)$|^\-\-eNB[1-2]Password=(.+)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBPassword=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBPassword=(.+)$', myArgv, re.IGNORECASE)
SSH.eNBPassword = matchReg.group(1)
elif re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB1Password = matchReg.group(1)
elif re.match('^\-\-eNB2Password=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB2Password=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB2Password = matchReg.group(1)
elif re.match('^\-\-eNBSourceCodePath=(.+)$|^\-\-eNB[1-2]SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
if re.match('^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE)
SSH.eNBSourceCodePath = matchReg.group(1)
elif re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB1SourceCodePath = matchReg.group(1)
elif re.match('^\-\-eNB2SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-eNB2SourceCodePath=(.+)$', myArgv, re.IGNORECASE)
SSH.eNB2SourceCodePath = matchReg.group(1)
3972
3973
3974
3975
3976
3977
3978
3979
3980
3981
3982
3983
3984
3985
3986
3987
3988
3989
3990
3991
3992
3993
3994
3995
3996
3997
3998
3999
4000
4001
elif re.match('^\-\-EPCIPAddress=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-EPCIPAddress=(.+)$', myArgv, re.IGNORECASE)
SSH.EPCIPAddress = matchReg.group(1)
elif re.match('^\-\-EPCBranch=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-EPCBranch=(.+)$', myArgv, re.IGNORECASE)
SSH.EPCBranch = matchReg.group(1)
elif re.match('^\-\-EPCUserName=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-EPCUserName=(.+)$', myArgv, re.IGNORECASE)
SSH.EPCUserName = matchReg.group(1)
elif re.match('^\-\-EPCPassword=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-EPCPassword=(.+)$', myArgv, re.IGNORECASE)
SSH.EPCPassword = matchReg.group(1)
elif re.match('^\-\-EPCSourceCodePath=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-EPCSourceCodePath=(.+)$', myArgv, re.IGNORECASE)
SSH.EPCSourceCodePath = matchReg.group(1)
elif re.match('^\-\-EPCType=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-EPCType=(.+)$', myArgv, re.IGNORECASE)
if re.match('OAI', matchReg.group(1), re.IGNORECASE) or re.match('ltebox', matchReg.group(1), re.IGNORECASE):
SSH.EPCType = matchReg.group(1)
else:
sys.exit('Invalid EPC Type: ' + matchReg.group(1) + ' -- (should be OAI or ltebox)')
elif re.match('^\-\-ADBIPAddress=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-ADBIPAddress=(.+)$', myArgv, re.IGNORECASE)
SSH.ADBIPAddress = matchReg.group(1)
elif re.match('^\-\-ADBUserName=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-ADBUserName=(.+)$', myArgv, re.IGNORECASE)
SSH.ADBUserName = matchReg.group(1)
elif re.match('^\-\-ADBPassword=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-ADBPassword=(.+)$', myArgv, re.IGNORECASE)
SSH.ADBPassword = matchReg.group(1)
elif re.match('^\-\-XMLTestFile=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-XMLTestFile=(.+)$', myArgv, re.IGNORECASE)
SSH.testXMLfiles.append(matchReg.group(1))
SSH.nbTestXMLfiles += 1
elif re.match('^\-\-UEIPAddress=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-UEIPAddress=(.+)$', myArgv, re.IGNORECASE)
Boris Djalal
committed
SSH.UEIPAddress = matchReg.group(1)
elif re.match('^\-\-UEUserName=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-UEUserName=(.+)$', myArgv, re.IGNORECASE)
SSH.UEUserName = matchReg.group(1)
elif re.match('^\-\-UEPassword=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-UEPassword=(.+)$', myArgv, re.IGNORECASE)
SSH.UEPassword = matchReg.group(1)
Boris Djalal
committed
elif re.match('^\-\-UESourceCodePath=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-UESourceCodePath=(.+)$', myArgv, re.IGNORECASE)
SSH.UESourceCodePath = matchReg.group(1)
elif re.match('^\-\-finalStatus=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-finalStatus=(.+)$', myArgv, re.IGNORECASE)
finalStatus = matchReg.group(1)
if ((finalStatus == 'true') or (finalStatus == 'True')):
SSH.finalStatus = True
else:
Usage()
sys.exit('Invalid Parameter: ' + myArgv)
if re.match('^TerminateeNB$', mode, re.IGNORECASE):
if SSH.eNBIPAddress == '' or SSH.eNBUserName == '' or SSH.eNBPassword == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.eNB_instance = '0'
SSH.eNBSourceCodePath = '/tmp/'
SSH.TerminateeNB()
elif re.match('^TerminateUE$', mode, re.IGNORECASE):
if (SSH.ADBIPAddress == '' or SSH.ADBUserName == '' or SSH.ADBPassword == ''):
Usage()
sys.exit('Insufficient Parameter')
signal.signal(signal.SIGUSR1, receive_signal)
SSH.TerminateUE()
elif re.match('^TerminateOAIUE$', mode, re.IGNORECASE):
if SSH.UEIPAddress == '' or SSH.UEUserName == '' or SSH.UEPassword == '':
Usage()
sys.exit('Insufficient Parameter')
signal.signal(signal.SIGUSR1, receive_signal)
elif re.match('^TerminateHSS$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCType == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.TerminateHSS()
elif re.match('^TerminateMME$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCType == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.TerminateMME()
elif re.match('^TerminateSPGW$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCType == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.TerminateSPGW()
elif re.match('^LogCollectBuild$', mode, re.IGNORECASE):
if (SSH.eNBIPAddress == '' or SSH.eNBUserName == '' or SSH.eNBPassword == '' or SSH.eNBSourceCodePath == '') and (SSH.UEIPAddress == '' or SSH.UEUserName == '' or SSH.UEPassword == '' or SSH.UESourceCodePath == ''):
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollectBuild()
elif re.match('^LogCollecteNB$', mode, re.IGNORECASE):
if SSH.eNBIPAddress == '' or SSH.eNBUserName == '' or SSH.eNBPassword == '' or SSH.eNBSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollecteNB()
elif re.match('^LogCollectHSS$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCType == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollectHSS()
elif re.match('^LogCollectMME$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCType == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollectMME()
elif re.match('^LogCollectSPGW$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCType == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollectSPGW()
elif re.match('^LogCollectPing$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollectPing()
elif re.match('^LogCollectIperf$', mode, re.IGNORECASE):
if SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCSourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollectIperf()
elif re.match('^LogCollectOAIUE$', mode, re.IGNORECASE):
if SSH.UEIPAddress == '' or SSH.UEUserName == '' or SSH.UEPassword == '' or SSH.UESourceCodePath == '':
Usage()
sys.exit('Insufficient Parameter')
SSH.LogCollectOAIUE()
elif re.match('^InitiateHtml$', mode, re.IGNORECASE):
if (SSH.ADBIPAddress == '' or SSH.ADBUserName == '' or SSH.ADBPassword == ''):
Usage()
sys.exit('Insufficient Parameter')
count = 0
while (count < SSH.nbTestXMLfiles):
xml_test_file = cwd + "/" + SSH.testXMLfiles[count]
xml_test_file = sys.path[0] + "/" + SSH.testXMLfiles[count]
if (os.path.isfile(xml_test_file)):
xmlTree = ET.parse(xml_test_file)
xmlRoot = xmlTree.getroot()
SSH.htmlTabRefs.append(xmlRoot.findtext('htmlTabRef',default='test-tab-' + str(count)))
SSH.htmlTabNames.append(xmlRoot.findtext('htmlTabName',default='Test-' + str(count)))
SSH.htmlTabIcons.append(xmlRoot.findtext('htmlTabIcon',default='info-sign'))
foundCount += 1
if foundCount != SSH.nbTestXMLfiles:
SSH.nbTestXMLfiles = foundCount
SSH.CreateHtmlHeader()
elif re.match('^FinalizeHtml$', mode, re.IGNORECASE):
SSH.CreateHtmlFooter(SSH.finalStatus)
Boris Djalal
committed
elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re.IGNORECASE):
if re.match('^TesteNB$', mode, re.IGNORECASE):
if SSH.eNBIPAddress == '' or SSH.ranRepository == '' or SSH.ranBranch == '' or SSH.eNBUserName == '' or SSH.eNBPassword == '' or SSH.eNBSourceCodePath == '' or SSH.EPCIPAddress == '' or SSH.EPCUserName == '' or SSH.EPCPassword == '' or SSH.EPCType == '' or SSH.EPCSourceCodePath == '' or SSH.ADBIPAddress == '' or SSH.ADBUserName == '' or SSH.ADBPassword == '':
Boris Djalal
committed
Usage()
sys.exit('Insufficient Parameter')
if (SSH.EPCIPAddress != '') and (SSH.EPCIPAddress != 'none'):
SSH.copyout(SSH.EPCIPAddress, SSH.EPCUserName, SSH.EPCPassword, cwd + "/tcp_iperf_stats.awk", "/tmp")
SSH.copyout(SSH.EPCIPAddress, SSH.EPCUserName, SSH.EPCPassword, cwd + "/active_net_interfaces.awk", "/tmp")
Boris Djalal
committed
else:
if SSH.UEIPAddress == '' or SSH.ranRepository == '' or SSH.ranBranch == '' or SSH.UEUserName == '' or SSH.UEPassword == '' or SSH.UESourceCodePath == '':
Boris Djalal
committed
Usage()
sys.exit('UE: Insufficient Parameter')
#read test_case_list.xml file
# if no parameters for XML file, use default value
if (SSH.nbTestXMLfiles != 1):
xml_test_file = cwd + "/test_case_list.xml"
xml_test_file = cwd + "/" + SSH.testXMLfiles[0]
xmlTree = ET.parse(xml_test_file)
xmlRoot = xmlTree.getroot()
exclusion_tests=xmlRoot.findtext('TestCaseExclusionList',default='')
requested_tests=xmlRoot.findtext('TestCaseRequestedList',default='')
if (SSH.nbTestXMLfiles == 1):
SSH.htmlTabRefs.append(xmlRoot.findtext('htmlTabRef',default='test-tab-0'))
4152
4153
4154
4155
4156
4157
4158
4159
4160
4161
4162
4163
4164
4165
4166
4167
4168
4169
4170
4171
4172
4173
4174
4175
4176
all_tests=xmlRoot.findall('testCase')
exclusion_tests=exclusion_tests.split()
requested_tests=requested_tests.split()
#check that exclusion tests are well formatted
#(6 digits or less than 6 digits followed by +)
for test in exclusion_tests:
if (not re.match('^[0-9]{6}$', test) and
not re.match('^[0-9]{1,5}\+$', test)):
logging.debug('ERROR: exclusion test is invalidly formatted: ' + test)
sys.exit(1)
else:
logging.debug(test)
#check that requested tests are well formatted
#(6 digits or less than 6 digits followed by +)
#be verbose
for test in requested_tests:
if (re.match('^[0-9]{6}$', test) or
re.match('^[0-9]{1,5}\+$', test)):
logging.debug('INFO: test group/case requested: ' + test)
else:
logging.debug('ERROR: requested test is invalidly formatted: ' + test)
sys.exit(1)
if (SSH.EPCIPAddress != '') and (SSH.EPCIPAddress != 'none'):
SSH.CheckFlexranCtrlInstallation()
#get the list of tests to be done
todo_tests=[]
for test in requested_tests:
if (test_in_list(test, exclusion_tests)):
logging.debug('INFO: test will be skipped: ' + test)
else:
#logging.debug('INFO: test will be run: ' + test)
todo_tests.append(test)
signal.signal(signal.SIGUSR1, receive_signal)
SSH.CreateHtmlTabHeader()
for test_case_id in todo_tests:
for test in all_tests:
id = test.get('id')
if test_case_id != id:
continue
SSH.testCase_id = id
SSH.desc = test.findtext('desc')
action = test.findtext('class')
if (CheckClassValidity(action, id) == False):
continue
GetParametersFromXML(action)
Raphael Defosseux
committed
if action == 'Initialize_UE' or action == 'Attach_UE' or action == 'Detach_UE' or action == 'Ping' or action == 'Iperf' or action == 'Reboot_UE' or action == 'DataDisable_UE' or action == 'DataEnable_UE' or action == 'CheckStatusUE':
if (SSH.ADBIPAddress != 'none'):
terminate_ue_flag = False
SSH.GetAllUEDevices(terminate_ue_flag)
if action == 'Build_eNB':
SSH.BuildeNB()
elif action == 'WaitEndBuild_eNB':
SSH.WaitBuildeNBisFinished()
elif action == 'Initialize_eNB':
SSH.InitializeeNB()
elif action == 'Terminate_eNB':
SSH.TerminateeNB()
elif action == 'Initialize_UE':
SSH.InitializeUE()
elif action == 'Terminate_UE':
SSH.TerminateUE()
elif action == 'Attach_UE':
SSH.AttachUE()
elif action == 'Detach_UE':
SSH.DetachUE()
Raphael Defosseux
committed
elif action == 'DataDisable_UE':
SSH.DataDisableUE()
elif action == 'DataEnable_UE':
SSH.DataEnableUE()
elif action == 'CheckStatusUE':
SSH.CheckStatusUE()
elif action == 'Build_OAI_UE':
SSH.BuildOAIUE()
elif action == 'Initialize_OAI_UE':
SSH.InitializeOAIUE()
elif action == 'Terminate_OAI_UE':
SSH.TerminateOAIUE()
elif action == 'Initialize_CatM_module':
SSH.InitializeCatM()
elif action == 'Terminate_CatM_module':
SSH.TerminateCatM()
elif action == 'Attach_CatM_module':
SSH.AttachCatM()
elif action == 'Detach_CatM_module':
SSH.TerminateCatM()
elif action == 'Ping_CatM_module':
SSH.PingCatM()
elif action == 'Ping':
SSH.Ping()
elif action == 'Iperf':
SSH.Iperf()
elif action == 'Reboot_UE':
SSH.RebootUE()
elif action == 'Initialize_HSS':
SSH.InitializeHSS()
elif action == 'Terminate_HSS':
SSH.TerminateHSS()
elif action == 'Initialize_MME':
SSH.InitializeMME()
elif action == 'Terminate_MME':
SSH.TerminateMME()
elif action == 'Initialize_SPGW':
SSH.InitializeSPGW()
elif action == 'Terminate_SPGW':
SSH.TerminateSPGW()
elif action == 'Initialize_FlexranCtrl':
SSH.InitializeFlexranCtrl()
elif action == 'Terminate_FlexranCtrl':
SSH.TerminateFlexranCtrl()
elif action == 'IdleSleep':
SSH.IdleSleep()
else:
sys.exit('Invalid action')
SSH.CreateHtmlTabFooter(True)
else:
Usage()
sys.exit('Invalid mode')
sys.exit(0)