RRC: add an option to enable measurement reports

In the configuration file, to enable measurements, add:

    enable_measurement_reports = "yes";

Note that if x2 is enabled then the option 'enable_measurement_reports'
is not taken into account and the measurements are enabled.

ci-scripts/conf_files/enb.band13.tm1.50PRB.emtc.conf

@@ -360,6 +360,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -141,6 +141,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -141,6 +141,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -141,6 +141,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf

@@ -178,6 +178,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf

@@ -178,6 +178,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf

@@ -186,6 +186,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/enb.band7.tm2.25PRB.usrpb210.conf

@@ -181,6 +181,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/lte-fdd-basic-sim.conf

@@ -178,6 +178,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/lte-tdd-basic-sim.conf

@@ -141,6 +141,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -144,6 +144,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -144,6 +144,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -144,6 +144,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf

@@ -181,6 +181,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf

@@ -181,6 +181,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf

@@ -181,6 +181,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf

@@ -179,6 +179,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.10MHz.conf

@@ -141,6 +141,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.20MHz.conf

@@ -141,6 +141,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */

cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.5MHz.conf

@@ -141,6 +141,8 @@ eNBs =
                             }
                           );
 
+    enable_measurement_reports = "no";
+
     ///X2
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */