Cédric Roux authored 5 years ago and HARADA Masayuki committed 5 years ago

In TDD mode, CQI requests are not possible in special subframes (at
least for some TDD configurations, see 36.213 7.2.3 that says "a
DL subframe is valid if it does not contain a DwPTS field if the
length is less than  7680 Ts").

In the code, we simply disable CQI requests in special subframes,
no matter what the length of DwPTS.

A problem can arise if the DCI0 for a given UE are sent only in
those special subframes. In this case the UE will never report
CQI and the eNB will use low MCS for this UE, impacting performances.

Another, related, problem is when there are several UEs. There again
one UE might always get its DCI0 in special subframes and thus never
report CQI. There again, performance issues.

This commit is an attempt to improve the situation.

It does two things.

1 - tag the UE as schedulable in the function UE_is_to_be_scheduled
    if the cqi_req_timer is expired

2 - use cqi_req_timer as a criterium when ordering UEs for UL scheduling

The value chosen for the expiration of the cqi_req_timer in
UE_is_to_be_scheduled is quite high (300) because as the code is
today we may overschedule the UE for short bursts until we receive
a CQI from the UE. [TODO: fix the code properly to avoid this behavior.]

Note: the fairRR scheduler has not been analyzed and this commit may
      not fix anything in case the fairRR scheduler is used.

Release v1.1.0 Candidate

See merge request oai/openairinterface5g!650

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

See merge request oai/openairinterface5g!649

Develop: Integration 2019 Week 30
Master Branch Release v1.1 Candidate

The following Merge Requests are included:

* MR 630 : nfapi interface bug fixes
* MR 638 : X2 HO (tdd, forwarding, end marker)
* MR 646 : Loadtester bugfixes
* MR 647 : fix power estimation
* MR 648 : CI: X2 Handover Testing

CI: adding support to repeat scenario in case of failure.

See merge request oai/openairinterface5g!645

    nice when the tested feature is known to be unstable
    CDRX testing is now separated from normal FDD 10MHz testing

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

CI:  Downgrade cdrx testing

See merge request oai/openairinterface5g!643

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

develop integration branch: 2019 week 28

See merge request oai/openairinterface5g!640

* MR 635 : fix rfsim ue sync
* MR 636 : Bugfixes 2019 w28
* MR 637 : Fixing Multi-RRU support and CI Testing
* MR 639 : fix bladeRF compilation

Merge remote-tracking branch 'origin/ci-develop-multi-rru-support' into develop_integration_2019_w28

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

The 5G phone OPPO has a very big UE capability (> 2KB).

We need bigger buffers to transfer this, especially in x2 handover.

Also the sctp messages need a bigger buffer.

Note: in sctp, we didn't check for partial messages, it's now
      done. When detected, we exit. To be redone differently
      if needed. (Look for "if (!(flags & MSG_EOR))".)

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

We declare variables in header files, we don't define them. So we need
to use 'extern' in the header file and put the definition
in some C file.

This used to be done to ease power estimation in the UE,
but this is not correct. Let's put no energy in the REs
with no DCI data, which is what needs to be done.

Plus it consumes a lot of CPU because of calling taus()
way too much.

To be used when you send data to another host.

On the other host, to avoid ICMP traffic about the port
not being open, do:

./nc -l -u -p 9999 > /dev/null

You need to restart this command each time you run macpdu2wireshark.
You can use any other program that will accept UDP packets on the
port 9999 (default port of macpdu2wireshark, change if you use another
port of course).

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

   --> impact on performance -- disabling iperf testing

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Merge remote-tracking branch 'origin/bugfix-pucch-power-estimation' into develop_integration_2019_w30

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>