Newer
Older
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
sleep 5
fi
done
rm $1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "RF-SIM eNB oaitun_enb1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM eNB oaitun_enb1 is UP and CONFIGURED"
fi
fi
sleep 10
}
function start_rf_sim_ue {
local LOC_UE_VM_IP_ADDR=$2
local LOC_ENB_VM_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_PRB=$5
local LOC_FREQUENCY=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
echo "echo \"sudo apt-get --yes --quiet install daemon \"" > $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"export RFSIMULATOR=${LOC_ENB_VM_IP_ADDR}\"" >> $1
echo "export RFSIMULATOR=${LOC_ENB_VM_IP_ADDR}" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/ran_build/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/ran_build/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"got sync\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "RF-SIM UE is NOT sync'ed w/ eNB"
return
else
echo "RF-SIM UE is sync'ed w/ eNB"
fi
# Checking oaitun_ue1 interface has now an IP address
echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "RF-SIM UE oaitun_ue1 is DOWN or NOT CONFIGURED"
echo "RF-SIM UE oaitun_ue1 is UP and CONFIGURED"
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
function start_rf_sim_gnb {
local LOC_GNB_VM_IP_ADDR=$2
local LOC_LOG_FILE=$3
local LOC_NB_RBS=$4
local LOC_CONF_FILE=$5
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$6
echo "cd /home/ubuntu/tmp" > $1
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
#echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_ENB_VM_IP_ADDR#' -e 's#CI_UE_IP_ADDR#$LOC_UE_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
#echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
#echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/ran_build/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"RFSIMULATOR=server ./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --noS1 --nokrnmod 1 --rfsim\" > ./my-nr-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
echo "cat ./my-nr-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=gnb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/ran_build/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-nr-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_GNB_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"got sync\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_GNB_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
GNB_SYNC=0
echo "RF-SIM gNB is NOT sync'ed: process still alive?"
else
GNB_SYNC=1
echo "RF-SIM gNB is sync'ed: waiting for UE(s) to connect"
fi
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "ifconfig oaitun_enb1 | egrep -c \"inet addr\"" > $1
# Checking oaitun_enb1 interface has now an IP address
i="0"
while [ $i -lt 10 ]
do
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_GNB_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
sleep 5
fi
done
rm $1
if [ $i -lt 50 ]
then
GNB_SYNC=0
echo "RF-SIM gNB oaitun_enb1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM gNB oaitun_enb1 is UP and CONFIGURED"
fi
fi
sleep 10
}
function start_rf_sim_nr_ue {
local LOC_NR_UE_VM_IP_ADDR=$2
local LOC_GNB_VM_IP_ADDR=$3
local LOC_LOG_FILE=$4
local LOC_PRB=$5
local LOC_FREQUENCY=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
echo "echo \"sudo apt-get --yes --quiet install daemon \"" > $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/ran_build/build/\"" >> $1
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"RFSIMULATOR=${LOC_GNB_VM_IP_ADDR} ./nr-uesoftmodem --numerology 1 -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor --noS1\" > ./my-nr-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
echo "cat ./my-nr-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=nr_ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/ran_build/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-nr-softmodem-run.sh" >> $1
ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_NR_UE_VM_IP_ADDR < $1
rm $1
local i="0"
echo "egrep -c \"rfsimulator: Success\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_NR_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -ne 0 ]
then
i="100"
else
i=$[$i+1]
fi
done
NR_UE_SYNC=1
rm $1
if [ $i -lt 50 ]
then
NR_UE_SYNC=0
echo "RF-SIM NR-UE is NOT sync'ed w/ gNB"
return
else
echo "RF-SIM NR-UE is sync'ed w/ gNB"
fi
# Checking oaitun_ue1 interface has now an IP address
i="0"
echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_NR_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
NR_UE_SYNC=0
echo "RF-SIM NR-UE oaitun_ue1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM NR-UE oaitun_ue1 is UP and CONFIGURED"
fi
sleep 10
}
function run_test_on_vm {
echo "############################################################"
echo "OAI CI VM script"
echo "############################################################"
if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) ]] || [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
ENB_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#enb-ethernet#" -e "s#rf-sim#enb-ethernet#"`
ENB_VM_CMDS=${ENB_VM_NAME}_cmds.txt
echo "ENB_VM_NAME = $ENB_VM_NAME"
echo "ENB_VM_CMD_FILE = $ENB_VM_CMDS"
UE_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#ue-ethernet#" -e "s#rf-sim#ue-ethernet#"`
UE_VM_CMDS=${UE_VM_NAME}_cmds.txt
echo "UE_VM_NAME = $UE_VM_NAME"
echo "UE_VM_CMD_FILE = $UE_VM_CMDS"
GNB_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#gnb-usrp#" -e "s#rf-sim#gnb-usrp#"`
GNB_VM_CMDS=${GNB_VM_NAME}_cmds.txt
echo "GNB_VM_NAME = $GNB_VM_NAME"
echo "GNB_VM_CMD_FILE = $GNB_VM_CMDS"
NR_UE_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#nr-ue-usrp#" -e "s#rf-sim#nr-ue-usrp#"`
NR_UE_VM_CMDS=${UE_VM_NAME}_cmds.txt
echo "NR_UE_VM_NAME = $NR_UE_VM_NAME"
echo "NR_UE_VM_CMD_FILE = $NR_UE_VM_CMDS"
else
echo "VM_NAME = $VM_NAME"
echo "VM_CMD_FILE = $VM_CMDS"
fi
echo "JENKINS_WKSP = $JENKINS_WKSP"
echo "ARCHIVES_LOC = $ARCHIVES_LOC"
if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) ]] || [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
then
echo "############################################################"
echo "Waiting for ENB VM to be started"
echo "############################################################"
uvt-kvm wait $ENB_VM_NAME --insecure
ENB_VM_IP_ADDR=`uvt-kvm ip $ENB_VM_NAME`
echo "$ENB_VM_NAME has for IP addr = $ENB_VM_IP_ADDR"
echo "############################################################"
echo "Waiting for UE VM to be started"
echo "############################################################"
uvt-kvm wait $UE_VM_NAME --insecure
UE_VM_IP_ADDR=`uvt-kvm ip $UE_VM_NAME`
echo "$UE_VM_NAME has for IP addr = $UE_VM_IP_ADDR"
echo "############################################################"
echo "Waiting for GNB VM to be started"
echo "############################################################"
uvt-kvm wait $GNB_VM_NAME --insecure
GNB_VM_IP_ADDR=`uvt-kvm ip $GNB_VM_NAME`
echo "$GNB_VM_NAME has for IP addr = $GNB_VM_IP_ADDR"
echo "############################################################"
echo "Waiting for NR-UE VM to be started"
echo "############################################################"
uvt-kvm wait $NR_UE_VM_NAME --insecure
NR_UE_VM_IP_ADDR=`uvt-kvm ip $NR_UE_VM_NAME`
echo "$NR_UE_VM_NAME has for IP addr = $NR_UE_VM_IP_ADDR"
else
echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
fi
if [ "$RUN_OPTIONS" == "none" ]
echo "No run on VM testing for this variant currently"
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
echo "############################################################"
echo "Running test script on VM ($VM_NAME)"
echo "############################################################"
echo "echo \"sudo apt-get --yes --quiet install bc \"" > $VM_CMDS
echo "sudo apt-get update > bc-install.txt 2>&1" >> $VM_CMDS
echo "sudo apt-get --yes install bc >> bc-install.txt 2>&1" >> $VM_CMDS
echo "cd tmp" >> $VM_CMDS
echo "echo \"source oaienv\"" >> $VM_CMDS
echo "source oaienv" >> $VM_CMDS
echo "echo \"cd cmake_targets/autotests\"" >> $VM_CMDS
echo "cd cmake_targets/autotests" >> $VM_CMDS
echo "echo \"rm -Rf log\"" >> $VM_CMDS
echo "rm -Rf log" >> $VM_CMDS
echo "$RUN_OPTIONS" | sed -e 's@"@\\"@g' -e 's@^@echo "@' -e 's@$@"@' >> $VM_CMDS
echo "$RUN_OPTIONS" >> $VM_CMDS
echo "cp /home/ubuntu/bc-install.txt log" >> $VM_CMDS
echo "cd log" >> $VM_CMDS
echo "zip -r -qq tmp.zip *.* 0*" >> $VM_CMDS
Raphael Defosseux
committed
echo "echo \"############################################################\"" >> $VM_CMDS
echo "echo \"Evaluating remaining memory on disk!\"" >> $VM_CMDS
echo "echo \"############################################################\"" >> $VM_CMDS
echo "echo \"df -h\"" >> $VM_CMDS
echo "df -h" >> $VM_CMDS
ssh -T -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
echo "############################################################"
echo "Creating a tmp folder to store results and artifacts"
echo "############################################################"
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/autotests/log/tmp.zip $ARCHIVES_LOC
pushd $ARCHIVES_LOC
unzip -qq -DD tmp.zip
rm tmp.zip
if [ -f results_autotests.xml ]
then
FUNCTION=`echo $VM_NAME | sed -e "s@$VM_TEMPLATE@@"`
NEW_NAME=`echo "results_autotests.xml" | sed -e "s@results_autotests@results_autotests-$FUNCTION@"`
echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $NEW_NAME
echo "<?xml-stylesheet type=\"text/xsl\" href=\"$FUNCTION.xsl\" ?>" >> $NEW_NAME
cat results_autotests.xml >> $NEW_NAME
sed -e "s@TEMPLATE@$FUNCTION@" $JENKINS_WKSP/ci-scripts/template.xsl > $FUNCTION.xsl
#mv results_autotests.xml $NEW_NAME
rm results_autotests.xml
fi
popd
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VM"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
echo "############################################################"
echo "Checking run status"
echo "############################################################"
LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
NB_FOUND_FILES=0
NB_RUNS=0
NB_FAILURES=0
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
for FULLFILE in $LOG_FILES
do
TESTSUITES=`egrep "testsuite errors" $FULLFILE`
for TESTSUITE in $TESTSUITES
do
if [[ "$TESTSUITE" == *"tests="* ]]
then
RUNS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_RUNS=$((NB_RUNS + RUNS))
fi
if [[ "$TESTSUITE" == *"failures="* ]]
then
FAILS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
NB_FAILURES=$((NB_FAILURES + FAILS))
fi
done
NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
done
echo "NB_FOUND_FILES = $NB_FOUND_FILES"
echo "NB_RUNS = $NB_RUNS"
echo "NB_FAILURES = $NB_FAILURES"
if [ $NB_FOUND_FILES -eq 0 ]; then STATUS=-1; fi
if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
if [[ "$EPC_IPADDR" == "" ]]
then
# Creating a VM for EPC and installing SW
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# Starting EPC
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
else
echo "We will use EPC on $EPC_IPADDR"
EPC_VM_IP_ADDR=$EPC_IPADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
TRANS_MODES=("fdd" "tdd")
BW_CASES=(05 10 20)
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
Raphael Defosseux
committed
# Not Running in TDD-20MHz : too unstable
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then continue; fi
if [[ $BW =~ .*05.* ]]; then PRB=25; fi
if [[ $BW =~ .*10.* ]]; then PRB=50; fi
if [[ $BW =~ .*20.* ]]; then PRB=100; fi
if [[ $TMODE =~ .*fdd.* ]]; then FREQUENCY=2680; else FREQUENCY=2350; fi
echo "############################################################"
echo "Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE $PRB lte-${TMODE}-basic-sim.conf none
echo "############################################################"
echo "Starting the UE in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
Raphael Defosseux
committed
full_terminate
Raphael Defosseux
committed
continue
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR 1
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
# Not more testing in any TDD : too unstable
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*05.* ]]; then full_terminate; continue; fi
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*10.* ]]; then full_terminate; continue; fi
if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then full_terminate; continue; fi
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
if [[ $TMODE =~ .*fdd.* ]]
then
if [[ $BW =~ .*20.* ]]; then THROUGHPUT=12; else THROUGHPUT=10; fi
else
THROUGHPUT=6
fi
CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_dl
generic_iperf $VM_CMDS $VM_IP_ADDR $UE_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 0 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
# Not more testing in FDD-20MHz : too unstable
if [[ $TMODE =~ .*fdd.* ]] && [[ $BW =~ .*20.* ]]; then full_terminate; continue; fi
echo "############################################################"
echo "Iperf UL"
echo "############################################################"
THROUGHPUT=2
CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_ul
generic_iperf $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $VM_CMDS $VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 0 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
full_terminate
done
done
if [ -d $JENKINS_WKSP/flexran ]
then
echo "############################################################"
echo "Flexran testing is possible"
echo "############################################################"
local j="0"
while [ $j -lt 20 ]
do
if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
then
echo "Found an proper flexran controller vm build"
j="100"
else
j=$[$j+1]
sleep 30
fi
done
if [ $j -lt 50 ]
then
echo "ERROR: compiling flexran controller on vm went wrong"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
FLEXRAN_CTL_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#flexran-rtc#"`
FLEXRAN_CTL_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#flexran-rtc-cmds#"`
IS_FLEXRAN_VM_ALIVE=`uvt-kvm list | grep -c $FLEXRAN_CTL_VM_NAME`
if [ $IS_FLEXRAN_VM_ALIVE -eq 0 ]
then
echo "ERROR: Flexran Ctl VM is not alive"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
full_basic_sim_destroy
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
fi
uvt-kvm wait $FLEXRAN_CTL_VM_NAME --insecure
FLEXRAN_CTL_VM_IP_ADDR=`uvt-kvm ip $FLEXRAN_CTL_VM_NAME`
echo "$FLEXRAN_CTL_VM_NAME has for IP addr = $FLEXRAN_CTL_VM_IP_ADDR"
echo "FLEXRAN_CTL_VM_CMDS = $FLEXRAN_CTL_VM_CMDS"
echo "############################################################"
echo "Starting the FLEXRAN CONTROLLER"
echo "############################################################"
start_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 01_no_enb_connected
echo "############################################################"
echo "Starting the eNB in FDD-5MHz mode with Flexran ON"
echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_05fMHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf $FLEXRAN_CTL_VM_IP_ADDR
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 02_enb_connected
echo "############################################################"
echo "Starting the UE in FDD-5MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_05fMHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 03_enb_ue_connected
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR 1
sleep 30
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
sleep 10
echo "############################################################"
echo "Stopping the FLEXRAN CONTROLLER"
echo "############################################################"
stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$FLEXRAN_CTL_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/flexran_ctl_*.log $ARCHIVES_LOC
fi
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
if [[ "$EPC_IPADDR" == "" ]]
then
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
full_basic_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-ru-sim.* ]]
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
if [[ "$EPC_IPADDR" == "" ]]
then
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#rf-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
fi
# withS1 configuration is not working
#EPC_CONFIGS=("wS1" "noS1")
#TRANS_MODES=("fdd" "tdd")
#BW_CASES=(05 10 20)
EPC_CONFIGS=("noS1" "wS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
if [[ "$EPC_IPADDR" == "" ]]
then
echo "############################################################"
echo "Start EPC for the wS1 configuration"
echo "############################################################"
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
S1_NOS1_CFG=1
else
echo "############################################################"
echo "Using external EPC " $EPC_IPADDR
echo "############################################################"
$EPC_VM_IP_ADDR=$EPC_IPADDR
S1_NOS1_CFG=1
LTEBOX=0
fi
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "############################################################"
echo "Running now in a no-S1 "
echo "############################################################"
S1_NOS1_CFG=0
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
fi
for TMODE in ${TRANS_MODES[@]}
do
if [[ $TMODE =~ .*fdd.* ]]
then
CONF_FILE=enb.band7.tm1.50PRB.usrpb210.conf
FREQUENCY=2680
else
CONF_FILE=enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf
FREQUENCY=2350
fi
for BW in ${BW_CASES[@]}
do
if [[ $BW =~ .*05.* ]]; then PRB=25; fi
if [[ $BW =~ .*10.* ]]; then PRB=50; fi
if [[ $BW =~ .*20.* ]]; then PRB=100; fi
echo "############################################################"
echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_enb.log
start_rf_sim_enb $ENB_VM_CMDS "$ENB_VM_IP_ADDR" "$EPC_VM_IP_ADDR" $CURRENT_ENB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
echo "############################################################"
echo "${CN_CONFIG} : Starting the UE"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ue.log
start_rf_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
if [ $S1_NOS1_CFG -eq 1 ]
then
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
if [ $S1_NOS1_CFG -eq 1 ]
then
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
echo "############################################################"
echo "${CN_CONFIG} : Pinging the EPC from UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_epc.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : Pinging the eNB from UE"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_enb_from_ue.log
ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
fi
if [ $S1_NOS1_CFG -eq 1 ]
then
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE from EPC"
echo "############################################################"
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_ue.log
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
else
echo "############################################################"
echo "${CN_CONFIG} : Pinging the UE from eNB"
echo "############################################################"
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
PING_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ping_from_enb_ue.log
ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
fi
if [ $S1_NOS1_CFG -eq 0 ]
then
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
THROUGHPUT=4
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- eNB is server and UE is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul
THROUGHPUT=2
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
generic_iperf $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
done
done
done
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
CN_CONFIG="noS1"
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
S1_NOS1_CFG=0
PRB=106
FREQUENCY=3510
######### start of loop
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb.log
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue.log
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
if [ $NR_UE_SYNC -eq 0 ]
then
echo "Problem w/ gNB and NR-UE not syncing"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
THROUGHPUT="30K"
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_dl
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
generic_iperf $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
######### end of loop
full_l2_sim_destroy
echo "############################################################"
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-l2-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
# Building UE elsewhere in VM
#build_ue_on_separate_folder $VM_CMDS $VM_IP_ADDR
# Creating a VM for EPC and installing SW
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#epc#"`
EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
LTEBOX=0
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
# adding 16 users to EPC subscriber lists
add_user_to_epc_lists $EPC_VM_CMDS $EPC_VM_IP_ADDR 16
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
EPC_CONFIGS=("wS1" "noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
NB_USERS=(01 04)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo "############################################################"
echo "Start EPC for the wS1 configuration"
echo "############################################################"
start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
# Retrieve EPC real IP address
retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
S1_NOS1_CFG=1
else
echo "############################################################"
echo "Terminate EPC"
echo "############################################################"
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
echo "############################################################"
echo "Running now in a no-S1 configuration"
echo "############################################################"
S1_NOS1_CFG=0
fi
for TMODE in ${TRANS_MODES[@]}
do