added readinessProbe and livenessProbe

charts/oai-amf/scripts/live-ready.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+AMF_PORT_FOR_NGAP=38412
+AMF_PORT_FOR_N11_HTTP=80
+AMF_IP_NGAP_INTERFACE=$(ifconfig $AMF_INTERFACE_NAME_FOR_NGAP | grep inet | awk {'print $2'})
+AMF_IP_N11_INTERFACE=$(ifconfig $AMF_INTERFACE_NAME_FOR_N11 | grep inet | awk {'print $2'})
+N2_PORT_STATUS=$(netstat -Snpl | grep -o "$AMF_IP_NGAP_INTERFACE:$AMF_PORT_FOR_NGAP")
+N11_PORT_STATUS=$(netstat -tnpl | grep -o "$AMF_IP_N11_INTERFACE:$AMF_PORT_FOR_N11_HTTP")
+#Check if entrypoint properly configured the conf file and no parameter is unset (optional)
+NB_UNREPLACED_AT=`cat /openair-amf/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+
+if [ $NB_UNREPLACED_AT -ne 0 ]; then
+	STATUS=1
+	echo "Healthcheck error: configuration file is not configured properly"
+fi
+
+if [[ -z $N2_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: N2 SCTP port $AMF_PORT_FOR_NGAP is not listening"
+fi
+
+if [[ -z $N11_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: N11/SBI TCP/HTTP port $AMF_PORT_FOR_N11_HTTP is not listening"
+fi
+
+
+exit $STATUS

charts/oai-amf/templates/configmap.yaml

@@ -6,3 +6,10 @@ data:
   {{- range $key, $val := .Values.config }}
   {{ $key }}: {{ $val | quote }}
   {{- end }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: health-cm
+data:
+  {{ (.Files.Glob "scripts/live-ready.sh").AsConfig | indent 2 }}
\ No newline at end of file

charts/oai-amf/templates/deployment.yaml

@@ -57,6 +57,27 @@ spec:
         {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
+        volumeMounts:
+        - mountPath: /scripts
+          name: scripts
+        {{- if .Values.readinessProbe}}
+        readinessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
+        {{- if .Values.livenessProbe}}
+        livenessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
         ports:
         - containerPort: {{ .Values.service.sctpPort }}
           name: oai-amf
@@ -304,12 +325,15 @@ spec:
               configMapKeyRef:
                 name: {{ .Chart.Name }}-configmap
                 key: operatorKey
-      {{- if .Values.persistence.sharedvolume}}
       volumes:
+      {{- if .Values.persistence.sharedvolume}}
       - name: cn5g-pv
         persistenceVolumeClaim:
           claimName: cn5g-pvc
       {{- end }}
+      - name: scripts
+        configMap:
+          name: health-cm
       dnsPolicy: ClusterFirst
       restartPolicy: Always
       serviceAccountName: {{ .Values.serviceAccount.name }}

charts/oai-amf/values.yaml

@@ -117,6 +117,10 @@ resources:
    cpu: 100m
    memory: 256Mi
 
+readinessProbe: true
+
+livenessProbe: true
+
 terminationGracePeriodSeconds: 30
 
 nodeSelector: {}

charts/oai-nrf/scripts/live-ready.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+NRF_IP_SBI_INTERFACE=$(ifconfig $NRF_INTERFACE_NAME_FOR_SBI | grep inet | awk {'print $2'})
+NRF_SBI_PORT_STATUS=$(netstat -tnpl | grep -o "$NRF_IP_SBI_INTERFACE:$NRF_INTERFACE_PORT_FOR_SBI")
+#Check if entrypoint properly configured the conf file and no parameter is unset(optional)
+NB_UNREPLACED_AT=`cat /openair-nrf/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+
+if [ $NB_UNREPLACED_AT -ne 0 ]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY configuration file is not configured properly"
+fi
+
+if [[ -z $NRF_SBI_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY SBI TCP/HTTP port $NRF_INTERFACE_PORT_FOR_SBI is not listening."
+fi
+
+exit $STATUS
\ No newline at end of file

charts/oai-nrf/templates/configmap.yaml

@@ -6,3 +6,10 @@ data:
   {{- range $key, $val := .Values.config }}
   {{ $key }}: {{ $val | quote }}
   {{- end }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: health-cm
+data:
+  {{ (.Files.Glob "scripts/live-ready.sh").AsConfig | indent 2 }}
\ No newline at end of file

charts/oai-nrf/templates/deployment.yaml

@@ -53,6 +53,27 @@ spec:
         {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
+        volumeMounts:
+        - mountPath: /scripts
+          name: scripts
+        {{- if .Values.readinessProbe}}
+        readinessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
+        {{- if .Values.livenessProbe}}
+        livenessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
         ports:
         - containerPort: {{ .Values.service.http1Port }}
           name: http1
@@ -91,12 +112,15 @@ spec:
               configMapKeyRef:
                 name: {{ .Chart.Name }}-configmap
                 key: nrfApiVersion
-      {{- if .Values.persistence.sharedvolume}}
       volumes:
+      {{- if .Values.persistence.sharedvolume}}
       - name: cn5g-pv
-        persistentVolumeClaim:
+        persistenceVolumeClaim:
           claimName: cn5g-pvc
       {{- end }}
+      - name: scripts
+        configMap:
+          name: health-cm
       dnsPolicy: ClusterFirst
       restartPolicy: Always
       serviceAccountName: {{ .Values.serviceAccount.name }}

charts/oai-nrf/values.yaml

@@ -76,6 +76,10 @@ resources:
 
 terminationGracePeriodSeconds: 30
 
+readinessProbe: true
+
+livenessProbe: true
+
 nodeSelector: {}
 
 nodeName: 

charts/oai-smf/scripts/live-ready.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+SMF_IP_SBI_INTERFACE=$(ifconfig $SMF_INTERFACE_NAME_FOR_SBI | grep inet | awk {'print $2'})
+#Check if entrypoint properly configured the conf file and no parameter is unset(optional)
+SMF_SBI_PORT_STATUS=$(netstat -tnpl | grep -o "$SMF_IP_SBI_INTERFACE:$SMF_INTERFACE_PORT_FOR_SBI")
+NB_UNREPLACED_AT=`cat /openair-smf/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+
+if [ $NB_UNREPLACED_AT -ne 0 ]; then
+	STATUS=-1
+	echo "Healthcheck error: UNHEALTHY configuration file is not configured properly"
+fi
+
+if [[ -z $SMF_SBI_PORT_STATUS ]]; then
+	STATUS=-1
+	echo "Healthcheck error: UNHEALTHY SBI TCP/HTTP port $SMF_INTERFACE_PORT_FOR_SBI is not listening."
+fi
+
+exit $STATUS
\ No newline at end of file

charts/oai-smf/templates/configmap.yaml

@@ -6,4 +6,10 @@ data:
   {{- range $key, $val := .Values.config }}
   {{ $key }}: {{ $val | quote }}
   {{- end }}
-
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: health-cm
+data:
+  {{ (.Files.Glob "scripts/live-ready.sh").AsConfig | indent 2 }}
\ No newline at end of file

charts/oai-smf/templates/deployment.yaml

@@ -44,6 +44,27 @@ spec:
         image: "{{ .Values.nfimage.repository }}:{{ .Values.nfimage.version }}"
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
+        volumeMounts:
+        - mountPath: /scripts
+          name: scripts
+        {{- if .Values.readinessProbe}}
+        readinessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
+        {{- if .Values.livenessProbe}}
+        livenessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
         ports:
         - containerPort: {{ .Values.service.n4Port }}
           name: oai-smf
@@ -197,12 +218,15 @@ spec:
           - /bin/sleep
           - infinity
         {{- end}}
-      {{- if .Values.persistence.sharedvolume}}
       volumes:
+      {{- if .Values.persistence.sharedvolume}}
       - name: cn5g-pv
-        persistentVolumeClaim:
+        persistenceVolumeClaim:
           claimName: cn5g-pvc
       {{- end }}
+      - name: scripts
+        configMap:
+          name: health-cm
       dnsPolicy: ClusterFirst
       restartPolicy: Always
       serviceAccountName: {{ .Values.serviceAccount.name }}

charts/oai-smf/values.yaml

@@ -97,8 +97,12 @@ resources:
    cpu: 100m
    memory: 256Mi
 
+readinessProbe: true
+
+livenessProbe: true
+
 terminationGracePeriodSeconds: 30
 
 nodeSelector: {}
 
-#nodeName: 
+nodeName: 

charts/oai-spgwu-tiny/scripts/live-ready.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+SGW_PORT_FOR_S1U_S12_S4_UP=2152
+SGW_PORT_FOR_SX=8805
+SGW_IP_S1U_INTERFACE=$(ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP | grep inet | awk {'print $2'})
+SGW_IP_SX_INTERFACE=$(ifconfig $SGW_INTERFACE_NAME_FOR_SX | grep inet | awk {'print $2'})
+S1U_S12_S4_UP_PORT_STATUS=$(netstat -unpl | grep -o "$SGW_IP_S1U_INTERFACE:$SGW_PORT_FOR_S1U_S12_S4_UP")
+SX_PORT_STATUS=$(netstat -unpl | grep -o "$SGW_IP_SX_INTERFACE:$SGW_PORT_FOR_SX")
+#Check if entrypoint properly configured the conf file and no parameter is unset (optional)
+NB_UNREPLACED_AT=`cat /openair-spgwu/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+if [ $NB_UNREPLACED_AT -ne 0 ]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY configuration file is not configured properly"
+fi
+
+if [[ -z $S1U_S12_S4_UP_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY S1U port $SGW_PORT_FOR_S1U_S12_S4_UP is not listening."
+fi
+
+if [[ -z $SX_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY SX port $SGW_PORT_FOR_SX is not listening."
+fi
+
+exit $STATUS
\ No newline at end of file

charts/oai-spgwu-tiny/templates/configmap.yaml

@@ -5,4 +5,11 @@ metadata:
 data:
   {{- range $key, $val := .Values.config }}
   {{ $key }}: {{ $val | quote }}
-  {{- end }}
+  {{- end }}
\ No newline at end of file
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: health-cm
+data:
+  {{ (.Files.Glob "scripts/live-ready.sh").AsConfig | indent 2 }}
\ No newline at end of file

charts/oai-spgwu-tiny/templates/deployment.yaml

@@ -48,6 +48,27 @@ spec:
         image: "{{ .Values.nfimage.repository }}:{{ .Values.nfimage.version }}"
         securityContext:
             {{- toYaml .Values.securityContext | nindent 12 }}
+        volumeMounts:
+        - mountPath: /scripts
+          name: scripts
+        {{- if .Values.readinessProbe}}
+        readinessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
+        {{- if .Values.livenessProbe}}
+        livenessProbe:
+          exec:
+            command:
+            - sh
+            - /scripts/live-ready.sh
+          initialDelaySeconds: 5
+          periodSeconds: 5
+        {{- end}}
         ports:
         - containerPort: {{ .Values.service.pfcpPort }}
           name: oai-spgwu
@@ -221,12 +242,15 @@ spec:
             memory: {{ .Values.resources.limits.memory | quote }}
             cpu: {{ .Values.resources.limits.cpu | quote }}
         {{- end}}
-      {{- if .Values.persistence.sharedvolume}}
       volumes:
+      {{- if .Values.persistence.sharedvolume}}
       - name: cn5g-pv
-        persistentVolumeClaim:
+        persistenceVolumeClaim:
           claimName: cn5g-pvc
       {{- end }}
+      - name: scripts
+        configMap:
+          name: health-cm
       dnsPolicy: ClusterFirst
       restartPolicy: Always
       schedulerName: default-scheduler

charts/oai-spgwu-tiny/values.yaml

@@ -98,6 +98,10 @@ resources:
    cpu: 100m
    memory: 256Mi
 
+readinessProbe: true
+
+livenessProbe: true
+
 terminationGracePeriodSeconds: 30
 
 nodeSelector: {}

docs/DEPLOY_SA5G_HC.md

@@ -145,6 +145,9 @@ The mysql database is pre-configured with some subscriber information. If there
   operatorKey: "63bfa50ee6523365ff14c1f45f88737d" (should be the same in mysql)
 ```
 
+
+Configure `readinessProbe` and `livenessProbe` by default they are `true` to switch them off change the value with `false`
+
 There are more parametes which can be configured like extra interfaces and resource usage by network function, please refer [values.yaml](../charts/oai-amf/values.yaml). Infront of every parameter there is a comment. 
 
 ### 3.3 Configuring SMF
@@ -165,6 +168,8 @@ config:
 
 Currenly DNN related information and UE network related information can only be changed at the time of building the SMF network function. Refer [Configure the Containers](./CONFIGURE_CONTAINERS.md) to understand how it can be done. 
 
+Configure `readinessProbe` and `livenessProbe` by default they are `true` to switch them off change the value with `false`
+
 There are more parametes which can be configured like extra interfaces and resource usage by network function, please refer [values.yaml](../charts/oai-smf/values.yaml). Infront of every parameter there is a comment. 
 
 ### 3.4 Configuring UPF
@@ -186,12 +191,16 @@ config:
   pidDirectory: "/var/run"
 ```
 
+Configure `readinessProbe` and `livenessProbe` by default they are `true` to switch them off change the value with `false`
+
 There are more parametes which can be configured like extra interfaces and resource usage by network function, please refer [values.yaml](../charts/oai-spgwu-tiny/values.yaml). Infront of every parameter there is a comment. 
 
 ### 3.5 Configuring NRF
 
 NRF configuration is straight forward, most of configurable parameters have comment infront of it for explaination. Refer the [values.yaml](../charts/oai-nrf/values.yaml)
 
+Configure `readinessProbe` and `livenessProbe` by default they are `true` to switch them off change the value with `false`
+
 ### 3.6 Configuring subscriber data in MYSQL
 
 Currently the MYSQL is configured with below subscriber data,
@@ -225,15 +234,15 @@ Once the configuration is finished the charts can be deployed with a user who ha
 
 ```
 $ helm install mysql mysql/
-# wait for the pod to come up
+# wait for the pod to be ready 
 $ helm install amf oai-amf/
-# wait for the pod to come up
+# wait for the pod to be ready 
 $ helm install nrf oai-nrf/
-# wait for the pod to come up
+# wait for the pod to be ready 
 $ helm install smf oai-smf/
-# wait for the pod to come up
+# wait for the pod to be ready 
 $ helm install upf oai-spgwu-tiny/
-# wait for the pod to come up
+# wait for the pod to be ready 
 $ helm list
 NAME  NAMESPACE       REVISION  UPDATED                                   STATUS    CHART                 APP VERSION
 mysql oai-5g-develop  1         2021-07-29 14:20:34.010881045 +0200 CEST  deployed  mysql-1.6.9           5.7.30