Compilation will fail if UHD is not installed, there is no need
to check. Plus the test is wrong when you install UHD somewhere
else.

protobuf-c does not compile anymore.

Let's handle this a bit better.

We now install protobuf and protobuf-c only for the
flexran agent. That is, if you want to use the flexran
agent, you need to install protobuf/protobuf-c and
you do it this way:

  ./build_oai -I -a

(you add -a)

Other targets don't need protobuf nor protobuf-c, so
it's not installed by the -I command of build_oai,
unless you pass -a with -I.

Also, we now use protobuf 3.3.0, not 2.6.1. The code
has been adapted, a quick test seems to indicate that
the system works, but it has not been intensively tested.

Signed-off-by: Frank A. Zdarsky <fzdarsky@redhat.com>

- rename UE_NO_LOG to DISABLE_LOG_X
  because the name is misleading. The full software
  is impacted, not only the UE part
- same for compilation option ---ue-no-log
  that becomes --disable-log
- keep LOG_X for the standard case, that is the
  case without DISABLE_LOG_X where printf has been
  put. Two reasons:
  * printf is not realtime friendly
  * keep behavior similar for other users who may
    be troubled by different logs that don't add
    any benefit to previous logs

Signed-off-by: Frank A. Zdarsky <fzdarsky@redhat.com>

--ue-trace : Enabling UE trace for debug
--ue-timing : Enabling UE timing trace
--ue-no-log : Disabling all LOG_X traces

- import RRC ASN.1 defintions from the specifications
  (file openair2/RRC/LITE/MESSAGES/asn1c/ASN1_files/RRC-e10.asn)
  contrary to rel8/10, all modules have been imported, maybe it's too much
  to refine in case of problems
- deal with rel14 in fix_asn1
- all code that was for Rel10 is now for Rel10/Rel14
- some incompatible changes (mostly in naming) were resolved in favor
  of rel14, see in openair2/RRC/LITE/defs.h
- unsure about the rlc layer, some arrays have changed (values appended),
  I only changed the definition and in tests in the code, I changed
  the index limit, maybe it's not enough

Rel14 is the default compilation mode.

When rebuilding oaisim, I had a failure because the target
link already exists. The -f flag forces the link to be done.

- build script has ability to indicate location for downloading uhd images
- one simple wrapper to set environment variables and initiate another program (supposed to be lte-softmodem)

- the option --UE was abused! Let's introduce --UE-conf-nvram and
  --UE-gen-nvram
- the option name --UE-OUTPUT was not clear and is now replaced by
  --UE-gen-nvram
- the new options are described when running ./build_oai -h
- print_help has been modified (' replaced by ") to print
  $conf_nvram_path and $gen_nvram_path

All the test pass.

This commit reverts behaviour of data generation as before
commit 7207c65b05fd812a18371827f2bfb1431fc58696:

    fix .ue* filenames in scripts and documentation

    TODO add option to conf2uedata and adapt script

Imad ALAWE authored 8 years ago and FredericLeroy committed 8 years ago

This patch adds the conf2uedata tool for generating .ue.nvram* .ue.emm.nvram*
and .usim.nvram* files from a textual configuration file.

The configuration file define most usefull values like plmns, mnc, mcc, msin, K,
OPc for several users.
The files generated will always ends with a number corresponding to the user
entry in the configuration file.

This breaks oai5g because other script have not be updated for using
conf2uedata.
This breaks also the at_nas_ue command.

Examples of configuration files are in openair3/NAS/TOOLS/

The compilation of this module does not seem to be necessary,
as far as I have checked. Plus it fails when you run
"build_oai --oaisim --noS1", so let's not compile it.

- add progess bar report
- reduce ssh max_tries to 10
- cleanOldPrograms -> change kill cmd line to be able to run autotest on same machine than lte-softmodem (thanks Rohit & Gabriel)
- Cleanning output prints
- add --skip-machine-preparation on cmd line
- add --skip-sanity-check on cmd line
- add HTML REPORT (no-S1 only)
- add XML detailled report (no-S1 only)

The text has been updated in all those files.

	modified:   README.txt
	modified:   cmake_targets/CMakeLists.txt
	modified:   cmake_targets/at_commands/CMakeLists.txt
	modified:   cmake_targets/autotests/core.py
	modified:   cmake_targets/autotests/log.py
	modified:   cmake_targets/autotests/openair.py
	modified:   cmake_targets/autotests/run_exec_autotests.bash
	modified:   cmake_targets/autotests/run_exec_lte-softmodem_tests.py
	modified:   cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
	modified:   cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
	modified:   cmake_targets/autotests/tools/configure_usrpb210.py
	modified:   cmake_targets/autotests/tools/find_usb_path.bash
	modified:   cmake_targets/autotests/tools/free_mem.bash
	modified:   cmake_targets/autotests/tools/iperf3_script
	modified:   cmake_targets/autotests/tools/iperf3_script_phone
	modified:   cmake_targets/autotests/tools/iperf_script
	modified:   cmake_targets/autotests/tools/iperf_script_phone
	modified:   cmake_targets/autotests/tools/lib_autotest.py
	modified:   cmake_targets/autotests/tools/search_repl.py
	modified:   cmake_targets/build_oai
	modified:   cmake_targets/tools/asn1tostruct.py
	modified:   cmake_targets/tools/build_helper
	modified:   cmake_targets/tools/build_test_epc_tools
	modified:   cmake_targets/tools/example_enb_exmimo_mme_hss.txt
	modified:   cmake_targets/tools/example_oaisim_enb_ue_mme_virtual.txt
	modified:   cmake_targets/tools/indent_source_code
	modified:   cmake_targets/tools/init_exmimo2
	modified:   cmake_targets/tools/init_nas_nos1
	modified:   cmake_targets/tools/perf_oai.bash
	modified:   cmake_targets/tools/run_enb_s1_exmimo
	modified:   cmake_targets/tools/run_enb_s1_usrp
	modified:   cmake_targets/tools/run_enb_ue_virt_noS1
	modified:   cmake_targets/tools/run_enb_ue_virt_s1
	modified:   openair2/DOCS/TEMPLATES/README/Readme.doxy
	modified:   openair2/DOCS/TEMPLATES/README/readme.txt
	modified:   openair2/Makefile
	modified:   openair2/UTIL/OCG/Readme.doxy
	modified:   openair2/UTIL/OCG/readme.txt
	modified:   openair2/UTIL/OSD/recep.php
	modified:   openair2/X2AP/MESSAGES/ASN1/asn1tostruct.py
	modified:   openair3/DOCS/DOXYGEN/Makefile.am
	modified:   openair3/DOCS/Latex/EPC/Makefile
	modified:   openair3/DOCS/Makefile.am
	modified:   openair3/GTPV1-U/Makefile.am
	modified:   openair3/GTPV1-U/Makefile.eNB
	modified:   openair3/NAS/TEST/AS_SIMULATOR/Makefile
	modified:   openair3/NAS/TEST/NETWORK/Makefile
	modified:   openair3/NAS/TEST/USER/Makefile
	modified:   openair3/NAS/TOOLS/Makefile
	modified:   openair3/NAS/UE/API/USER/Makefile
	modified:   openair3/NAS/UE/API/USER/tst/Makefile
	modified:   openair3/NAS/UE/API/USIM/Makefile
	modified:   openair3/S1AP/MESSAGES/ASN1/asn1tostruct.py
	modified:   openair3/TEST/Makefile.am
	modified:   targets/ARCH/EXMIMO/USERSPACE/OCTAVE/gpib_send.cc
	modified:   targets/ARCH/EXMIMO/USERSPACE/OCTAVE/oarf_config_exmimo.cc
	modified:   targets/ARCH/EXMIMO/USERSPACE/OCTAVE/oarf_get_frame.cc
	modified:   targets/ARCH/EXMIMO/USERSPACE/OCTAVE/oarf_get_num_detected_cards.cc
	modified:   targets/ARCH/EXMIMO/USERSPACE/OCTAVE/oarf_send_frame.cc
	modified:   targets/ARCH/EXMIMO/USERSPACE/OCTAVE/oarf_stop.cc
	modified:   targets/ARCH/EXMIMO/USERSPACE/OCTAVE/oarf_stop_without_reset.cc
	modified:   targets/PROJECTS/E-MBMS/build_all.bash
	modified:   targets/PROJECTS/E-MBMS/start_enb.bash
	modified:   targets/PROJECTS/E-MBMS/start_ue.bash
	modified:   targets/PROJECTS/E-MBMS/utils.bash
	modified:   targets/PROJECTS/GENERIC-LTE-EPC/interfaces.bash
	modified:   targets/PROJECTS/GENERIC-LTE-EPC/networks.bash
	modified:   targets/PROJECTS/GENERIC-LTE-EPC/start_enb_and_ue_virt.bash
	modified:   targets/PROJECTS/GENERIC-LTE-EPC/start_ue.bash
	modified:   targets/PROJECTS/GENERIC-LTE-EPC/utils.bash
	modified:   targets/PROJECTS/GENERIC-LTE-EPC/virtual_box.bash
	modified:   targets/SCRIPTS/install_asn1c_0.9.24.modified.bash
	modified:   targets/TEST/OAI/case01.py
	modified:   targets/TEST/OAI/case02.py
	modified:   targets/TEST/OAI/case03.py
	modified:   targets/TEST/OAI/case04.py
	modified:   targets/TEST/OAI/case05.py
	modified:   targets/TEST/OAI/case11.py
	modified:   targets/TEST/OAI/case12.py
	modified:   targets/TEST/OAI/case13.py
	modified:   targets/TEST/OAI/core.py
	modified:   targets/TEST/OAI/log.py
	modified:   targets/TEST/OAI/openair.py
	modified:   targets/TEST/OAI/test01.py
	modified:   targets/TEST/OAI/test02.py
	modified:   targets/TEST/PDCP/readme.txt
	modified:   targets/build_helper.bash
	modified:   targets/build_oai.bash
	modified:   targets/perf_oai.bash